default search action
ITC 1996: Washington, DC, USA
- Proceedings IEEE International Test Conference 1996, Test and Design Validity, Washington, DC, USA, October 20-25, 1996. IEEE Computer Society 1996, ISBN 0-7803-3541-4
Session 1: Plenary
- Walden C. Rhines:
Emerging Technologies Drive Domain-Specific Solutions. 10 - Wojciech Maly:
New and Not-So-New Test Challenges of the Next Decade. 11
Session 2.0: Automatic Test Generation
- Peter Wohl, John A. Waicukauski:
Test Generation for Ultra-Large Circuits Using ATPG Constraints and Test-Pattern Templates. 13-20 - Mitsuo Teramoto, Tomoo Fukazawa:
Test Pattern Generation for Circuits with Asynchronous Signals Based on Scan. 21-28 - M. H. Konijnenburg, J. Th. van der Linden, Ad J. van de Goor:
Accelerated Compact Test Set Generation for Three-State Circuits. 29-38 - Fulvio Corno
, Paolo Prinetto, Maurizio Rebaudengo, Matteo Sonza Reorda
Comparing Topological, Symbolic and GA-based ATPGs: An Experimental Approach. 39-47
Session 3.0: BIST: Architectures and Generation
- Yuejian Wu, Saman Adham:
BIST Fault Diagnosis in Scan-Based VLSI Environments. 48-57 - Pieter M. Trouborst:
LFSR Reseeding as a Component of Board Level BIST. 58-67 - Charles E. Stroud, Eric Lee, Srinivasa Konala, Miron Abramovici:
Using ILA Testing for BIST in FPGAs. 68-75 - Dimitris Gizopoulos, Antonis M. Paschalis, Yervant Zorian:
An Effective BIST Scheme for Datapaths. 76-85
Session 4.0: New Test Considerations for Mixed-Signal Devices
- Seiji Sasho, Teruhisa Sakata:
Four Multi Probing Test for 16 Bit DAC with Vertical Contact Probe Card. 86-91 - Keith Lofstrom:
A Demonstration IC for the P1149.4 Mixed-Signal Test Standard. 92-98 - Koji Asami:
Testing the Digital Modulation of PHS Devices. 99-103
Session 5.0: Topics in Test Hardware
- Barry D. Kulp:
Testing and Characterizing Jitter in 100BASE-TX and 155.52 Mbit/S ATM Devices with a 1 Gsample/s AWG in an ATE System. 104-111 - Kenji Isawa, Yoshihiro Hashimoto:
High-Speed IDDQ Measurement Circuit. 112-117 - Solomon Max:
Extending Calibration Intervals. 118-126 - Steven DeFoster, Dennis Karst, Matthew Peterson, Paul Sendelbach, Kirk Kottschade:
Manufacturing Test of Fiber Channel Communications Cards and Optical Subassemblies. 127-134
Session 6.0: Practical and Higher-Level Fault Simulation
- Bejoy G. Oomman, Wu-Tung Cheng, John A. Waicukauski:
A Universal Technique for Accelerating Simulation of Scan Test Patterns. 135-141 - Elizabeth M. Rudnick, Janak H. Patel, Irith Pomeranz:
On Potential Fault Detection in Sequential Circuits. 142-149 - Weiwei Mao, Ravi K. Gulati:
Improving Gate Level Fault Coverage by RTL Fault Grading. 150-159 - Sankaran Karthik, Mark Aitken, Glidden Martin, Srinivasu Pappula, Bob Stettler, Praveen Vishakantaiah, Manuel A. d'Abreu, Jacob A. Abraham:
Distributed Mixed Level Logic and Fault Simulation on the Pentium® Pro Microprocessor. 160-166
Session 7.0: BIST Pattern Generation
- Nur A. Touba, Edward J. McCluskey:
Altering a Pseudo-Random Bit Sequence for Scan-Based BIST. 167-175 - Mohammed F. AlShaibi, Charles R. Kime:
MFBIST: A BIST Method for Random Pattern Resistant Circuits. 176-185 - Nadime Zacharia, Janusz Rajski, Jerzy Tyszer, John A. Waicukauski:
Two-Dimensional Test Data Decompressor for Multiple Scan Designs. 186-194 - Sybille Hellebrand, Hans-Joachim Wunderlich, Andre Hertwig:
Mixed-Mode BIST Using Embedded Processors. 195-204
Session 8.0: Testing of Asynchronous Circuits
- Marly Roncken, Eric Bruls:
Test Quality of Asynchronous Circuits: A Defect-oriented Evaluation. 205-214 - Marly Roncken, Emile H. L. Aarts, Wim F. J. Verhaegh:
Optimal Scan for Pipelined Testing: An Asynchronous Foundation. 215-224 - Volker Schöber, Thomas Kiel:
An Asynchronous Scan Path Concept for Micropipelines using the Bundled Data Convention. 225-231 - Montek Singh, Steven M. Nowick:
Synthesis-for-Initializability of Asynchronous Sequential Machines. 232-241
Session 9.0: Industry Impact: Screeninig, Test, and Measurement Breakthroughs
- Timothy R. Henry, Thomas Soo:
Burn-in Elimination of a High Volume Microprocessor Using IDDQ. 242-249 - Peter C. Maxwell, Robert C. Aitken, Kathleen R. Kollitz, Allen C. Brown:
IDDQ and AC Scan: The War Against Unmodelled Defects. 250-258 - Alan W. Righter, Jerry M. Soden, Richard W. Beegle:
High Resolution IDDQ Characterization and Testing - Practical Issues. 259-268 - Kazuyuki Ozaki, Hidenori Sekiguchi, Shinichi Wakana, Yoshiro Goto, Yasutoshi Umehara, Jun Matsumoto:
Novel Optical Probing System with Submicron Spatial Resolution for Internal Diagnosis of VLSI Circuits. 269-275
Session 10.0: Fault Simulation and Diagnosis of Delay Faults
- Marwan A. Gharaybeh, Michael L. Bushnell, Vishwani D. Agrawal:
An Exact Non-Enumerative Fault Simulator for Path-Delay Faults. 276-285 - Patrick Girard, Christian Landrault, Serge Pravossoudovitch, B. Rodriguez:
A Diagnostic ATPG for Delay Faults Based on Genetic Algorithms. 286-293 - Ismed Hartanto, Vamsi Boppana, W. Kent Fuchs:
Diagnostic Fault Equivalence Identification Using Redundancy Information and Structural Analysis. 294-302
Session 11.0: Memory Test: Design for Testability
- Piero Olivo, Marcello Dalpasso
Self-Learning Signature Analysis for Non-Volatile Memory Testing. 303-308 - Anne Meixner, Jash Banik:
Weak Write Test Mode: An SRAM Cell Stability Design for Test Technique. 309-318 - Narumi Sakashita, Fumihiro Okuda, Ken'ichi Shimomura, Hiroki Shimano, Mitsuhiro Hamada, Tetsuo Tada, Shinji Komori, Kazuo Kyuma, Akihiko Yasuoka, Haruhiko Abe:
A Built-In Self-Test Circuit with Timing Margin Test Function in a 1Gbit Synchronous DRAM. 319-324
Session 12.0: Board Test Challenges and Solutions
- Christophe Vaucher, Louis Balme:
Analog/Digital Testing of Loaded Boards Without Dedicated Test Points. 325-332 - Mick Tegethoff, Kenneth P. Parker, Ken Lee:
Opens Board Test Coverage: When is 99% Really 40%? 333-339 - D. Eugene Wedge, Tom Conner:
A Roadmap for Boundary-Scan Test Reuse. 340-346
Session 13.0: Delay-Fault Testing 1
- Harry Hengster, Uwe Sparmann, Bernd Becker, Sudhakar M. Reddy:
Local Transformations and Robust Dependent Path Delay. 347-356 - Irith Pomeranz, Sudhakar M. Reddy:
On Cancelling the Effects of Logic Sharing for Improved Path Delay Fault Testability. 357-366 - Jonathan T.-Y. Chang, Edward J. McCluskey:
Detecting Delay Flaws by Very-Low-Voltage Testing. 367-376
Session 14.0: Microprocessor Test
- Francis Pichon:
Testability Features for a Submicron Voice-coder ASIC. 377-385 - Hugo Cheung, Sandeep K. Gupta:
A BIST Methodology for Comprehensive Testing of RAM with Reduced Heat Dissipation. 386-395 - Wayne M. Needham, Naga Gollakota:
DFT Strategy for Intel Microprocessors. 396-399
Session 15.0: An Evolving Mixed-Signal Boundary-Scan Standard
- Lee Whetsel:
Proposal to Simplify Development of a Mixed-Signal Test Standard. 400-409 - Robert J. Russell:
A Method of Extending an 1149.1 Bus for Mixed-Signal Testing. 410-416 - Keith Lofstrom:
Early Capture for Boundary Scan Timing Measurements. 417-422
Session 16.0: Delay-Fault Testing 2
- Angela Krstic, Kwang-Ting Cheng, Srimat T. Chakradhar:
Identification and Test Generation for Primitive Faults. 423-432 - G. M. Luong, D. M. H. Walker:
Test Generation for Global Delay Faults. 433-442 - Dimitrios Karayiannis, Spyros Tragoudas:
ATPD: An Automatic Test Pattern Generator for Path Delay Faults. 443-452
Session 17.0: Software for New Test Strategies
- Yasuji Oyama, Toshinobu Kanai, Hironobu Niijima:
Scan Design Oriented Test Technique for VLSI's Using ATE. 453-460 - Klaus Helmreich, G. Reinwardt:
Virtual Test of Noise and Jitter Parameters. 461-470 - Yuhai Ma, Wanchun Shi:
A Novel Approach to the Analysis of VLSI Device Test Programs. 471-480
Session 18.0: Innovations in Current Testing
- James F. Plusquellic, Donald M. Chiarulli, Steven P. Levitan:
Digital Integrated Circuit Testing using Transient Signal Analysis. 481-490 - Jos van Sas, Urbain Swerts, Marc Darquennes:
Towards an Effective IDDQ Test Vector Selection and Application Methodology. 491-500 - Theo J. Powell, James R. Pair, Bernard G. Carbajal III:
Correlating Defects to Functional and IDDQ Tests. 501-510
Session 19.0: Mixed-Signal DFT and Fault Simulation
- Thomas Olbrich, Jordi Pérez, Ian Andrew Grout, Andrew Mark David Richardson
Defect-Oriented vs. Schematic-Level Based Fault Simulation for Mixed-Signal ICs. 511-520 - Giri Devarayanadurg, Prashant Goteti, Mani Soma:
Hierarchy Based Statistical Fault Simulation of Mixed-Signal ICs. 521-527 - Evan M. Hawrysh, Gordon W. Roberts:
An Integration of Memory-Based Analog Signal Generation into Current DFT Architectures. 528-537
Session 20.0: DFT: Inching Forward with Partial-Scan Design
- Vamsi Boppana, W. Kent Fuchs:
Partial Scan Design Based on State Transition Modeling. 538-547 - Dong Xiang, Janak H. Patel:
A Global Algorithm for the Partial Scan Design Problem Using Circuit State Information. 548-557 - Fulvio Corno
Partial Scan Flip Flop Selection for Simulation-Based Sequential ATPGs. 558-564
Session 21.0: Test Languages and Tools
- Anthony Taylor, Gregory A. Maston:
Standard Test Interface Language (STIL): A New Language for Patterns and Waveforms. 565-570 - Naim Ben-Hamida, Khaled Saab, David Marche, Bozena Kaminska, Guy Quesnel:
LIMSoft: Automated Tool for Design and Test Integration of Analog Circuits. 571-580 - Ilene Burnstein, Taratip Suwannasart, C. Robert Carlson:
Developing a Testing Maturity Model for Software Test Process Evaluation and Improvement. 581-589
Session 22.0: Application of SPC to IC Design, Manufacturing and Test
- Von-Kyoung Kim, Mick Tegethoff, Tom Chen:
ASIC Yield Estimation at Early Design Cycle. 590-594 - Daniel P. Core:
Risk Assessment Sampling Plans for Non-Standard (Maverick) Material. 595-604 - Jos van der Peet, Ger van Boxem:
SPC on the IC-Production Test Process. 605-610
Session 23.0: New Techniques for Realistic Faults
- David B. Lavo, Tracy Larrabee, Brian Chess:
Beyond the Byzantine Generals: Unexpected Behaviour and Bridging Fault Diagnosis. 611-619 - F. Celeiro, L. Dias, J. Ferreira, Marcelino B. Santos, João Paulo Teixeira:
Defect-Oriented IC Test and Diagnosis Using VHDL Fault Simulation. 620-628 - Li-C. Wang, M. Ray Mercer, Thomas W. Williams:
Using Target Faults To Detect Non-Tartget Defects. 629-638
Session 24.0: Design-for-Testability Inspirations
- Sandeep Bhatia, Tushar Gheewala, Prab Varma:
A Unifying Methodology for Intellectual Property and Custom Logic Testing. 639-648 - Nagesh Tamarapalli, Janusz Rajski:
Constructive Multi-Phase Test Point Insertion for Scan-Based BIST. 649-658 - Robert B. Norwood, Edward J. McCluskey:
Orthogonal Scan: Low-Overhead Scan for Data Paths. 659-668
Session 25.0: High Frequency and Timing in ATE
- Kazunori Chihara, Takashi Sekino, Koji Sasaki:
An Application of Photoconductive Switch for High-Speed Testing. 669-676 - Hideaki Imada, Kenichi Fujisaki, Toshimi Ohsawa, Masaru Tsuto:
Generation Technique of 500MHz Ultra-High Speed Algorithmic Pattern. 677-684 - Michael G. Davis:
The Effect of Periof Generation Techniques on Period Resolution and Waveform Jitter in VLSI Test Systems. 685-690
Session 26.0: Topics in Test Engineering
- Piero Franco, Siyad C. Ma, Jonathan Chang, Yi-Chin Chu, Sanjay Wattal, Edward J. McCluskey, Robert L. Stokes, William D. Farwell:
Analysis and Detection of Timing Failures in an Experimental Test Chip. 691-700 - David Potts, Roger Griesmer:
A Unique Methodology for At-Speed Test of cDSPTM and ASIC Devices. 701-707 - Ralf Stoffels:
Cost Effective Frequency Measurement for Production Testing. 708-716
Session 27.0: System Test: Practical Aspects, Partitioning and Simulation
- Wuudiann Ke:
Backplane Interconnect Test in a Boundary-Scan Environment. 717-724 - Yves Le Traon, Ghassan Al Hayek, Chantal Robach:
Testability-Oriented Hardware/Software Partitioning. 725-731 - Pablo Sanchez, Isabel Hidalgo:
System Level Fault Simulation. 732-740
Session 28.0: Test Synthesis Solutions
- Tom Eberle, Robert McVay, Chris Meyers, Jason Moore:
ASIC BIST Synthesis: A VHDL Approach. 741-750 - James Beausang, Chris Ellingham, Markus Robinson:
Integrating Scan into Hierarchical Synthesis Methodologies. 751-756 - Vishwani D. Agrawal, Ronald D. Blanton, Maurizio Damiani:
Synthesis of Self-Testing Finite State Machines from High-Level Specifications. 757-766
Session 29.0: Advanced Fault Modelling Techniques
- Yuyun Liao, D. M. H. Walker:
Fault Coverage Analysis for Physically-Based CMOS Bridging Faults at Different Power Supply Voltages. 767-775 - Michael J. Ohletz:
Realistic-Faults Mapping Scheme for the Fault Simulation of Integrated Analogue CMOS Circuits. 776-785 - Thomas W. Williams, Robert H. Dennard, Rohit Kapur, M. Ray Mercer, Wojciech Maly:
IDDQ Test: Sensitivity Analysis of Scaling. 786-792
Session 30.0: Test Economic Issues
- Hiromu Fujioka, Koji Nakamae, Akio Higashi:
Effects of Multi-Product, Small-Sized Production of LSIs Packaged in Various Packages on the Final Test Process Efficiency and Cost. 793-799 - Felix Frayman, Mick Tegethoff, Brenton White:
Issues in Optimizing the Test Process - A Telecom Case Study. 800-808 - Matthew Boutin, Peter Dziel:
Application of Boundary Scan in a Fault Tolerant Computer System. 809-817
Session 31.0: MCM Test: Methods and Applications
- Koppolu Sasidhar, Abhijit Chatterjee, Yervant Zorian:
Optimal Multiple Chain Relay Testing Scheme for MCMs on Large Area Substrates. 818-827 - Andrew Flint:
Three Different MCMs, Three Different Test Strategies. 828-833 - Edward P. Sayre:
MCM Compute Node Thermal Failure - Design or Test Problem? 834-838
Session D1.0: Design Validation: Methodologies and Case Studies
- Carl Pixley, Noel R. Strader, William C. Bruce, Jaehong Park, Matt Kaufmann, Kurt Shultz, Michael Burns, Jainendra Kumar, Jun Yuan, Janet Nguyen:
Commercial Design Verification: Methodology and Tools. 839-848 - Marc E. Levitt:
Formal Verification of the UltraSPARCTM Family of Processors via ATPG Methods. 849-856 - Neeta Ganguly, Magdy S. Abadir, Manish Pandey:
PowerPCTM Array Verification Methodology using Formal Techniques. 857-864
Session D2.0: Hybrid Validation and Test Techniques
- Shi-Yu Huang, Kwang-Ting Cheng, Kuang-Chien Chen, Uwe Gläser:
An ATPG-Based Framework for Verifying Sequential Equivalence. 865-874 - Dinos Moundanos, Jacob A. Abraham, Yatin Vasant Hoskote:
A Unified Framework for Design Validation and Manufacturing Test. 875-884 - Ghassan Al Hayek, Chantal Robach:
From Specification Validation to Hardware Testing: A Unified Method. 885-893
Session D3.0: Design Validation: From System Specification to Process Effects
- Duncan Clarke, Insup Lee:
Testing-Based Analysis of Real-Time System Models. 894-903 - Irith Pomeranz, Nirmal R. Saxena, Richard Reeve, Paritosh Kulkarni, Yan A. Li:
Generation of Test Cases for Hardware Design Verification of a Super-Scalar Fetch Processor. 904-913 - Melvin A. Breuer, Sandeep K. Gupta:
Process-Aggravated Noise (PAN): New Validation and Test Problems. 914-923
Session L1: Unpowered Opens Testing
- Kenneth P. Parker:
Introduction ITC 1996 Lecture Series on Unpowered Opens Testing. 924 - Ted T. Turner:
Capacitive Leadframe Testing. 925 - Jack Ferguson:
High Fault Coverage of In-Circuit IC Pin Faults with a Vectorless Test Technique Using Parasitic Transistors. 926 - Joe Wrinn:
Two New Techniques for Identifying Opens on Printed Circuit Boards: Analog Junction Test, and Radio Frequency Induction Test. 927 - Anthony J. Suto:
Analog AC Harmonic Method for Detecting Solder Opens. 928 - Stig Oresjo:
Unpowered Opens Test with X-Ray Laminography. 929
Session L2: Practical Aspects of IC Diagnosis & Failure Analysis: A Walk Through the Process
- David P. Vallett:
An Overview of CMOS VLSI Failure Analysis and the Importance of Test and Diagnostics. 930 - Robert C. Aitken:
Modelling the Unmodellable: Algorithmic Fault Diagnosis. 931 - Keith Baker, Jos van Beers:
Shmoo Plots - the Black Art of IC Test. 932-933 - Kenneth M. Butler, Karl Johnson, Jeff Platt, Anjali Jones, Jayashree Saxena:
Integrating Automated Diagnosis into the Testing and Failure Analysis Operations. 934 - Jerry M. Soden, Richard E. Anderson, Christopher L. Henderson:
IC Failure Analysis Tools and Techniques - Macig, Mystery, and Science. 935 - Donald Staab:
Practical Issues of Failure Diagnosis and Analysis in a Fast Cycle Time Environment. 936
Panel 1: Why Do We Talk about DFT When the Problem is Bad Design and Bad CAD Tools?
- William R. Simpson:
The Key to Concurrent Engineering is Design Tools. 937
Panel 2: Asynchronous Design: Nightmare or Opportunity?
- Stephen B. Furber:
The Return of Asynchronous Logic. 938 - Marly Roncken:
Asynchronous Design: Working the Fast Lane. 939
Panel 5: DFT for Embedded Cores
- Rochit Rajsuman:
Challenge of the 90's: Testing CoreWareTM Based ASICs. 940
Panel 6: What Are the Next Generation Test Methodologies for Board and System Test?
- Peter Dziel:
The Need for Complete System Level Test Standardization. 941
Panel 7: Will I-DDQ Testing Leak Away in Deep Sub-Micron Technology?
- Manoj Sachdev:
Deep Sub-micron IDDQ Test Options. 942
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-12-19 22:02 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: