(This abstract was borrowed from another version of this item.)"> (This abstract was borrowed from another version of this item.)">
[go: up one dir, main page]
More Web Proxy on the site http://driver.im/
IDEAS home Printed from https://ideas.repec.org/p/hal/journl/hal-00153097.html
   My bibliography  Save this paper

Technological determinism and modularity : lessons from a comparison between Aircraft and Auto Industries in Europe

Author

Listed:
  • Vincent Frigant

    (GREThA - Groupe de Recherche en Economie Théorique et Appliquée - UB - Université de Bordeaux - CNRS - Centre National de la Recherche Scientifique)

  • Damien Talbot

    (GREThA - Groupe de Recherche en Economie Théorique et Appliquée - UB - Université de Bordeaux - CNRS - Centre National de la Recherche Scientifique)

Abstract
Initial studies of modular manufacturing processes have shown that this dominant design required a fundamentally novel organisational structure of the industries. The underlying hypothesis of technological determinism merits a deeper exploration. The first part of the present paper aims at presenting the logic of this argument while making a distinction between the technological and organisational aspects of modularity. Based on this we then attempt a study of the manner in which the transition to modularity takes place in the aircraft and automobile industries. Our main conclusion is that while it may be possible to posit a convergence between these two industries, the paths followed are still quite clearly opposed.
(This abstract was borrowed from another version of this item.)

Suggested Citation

  • Vincent Frigant & Damien Talbot, 2005. "Technological determinism and modularity : lessons from a comparison between Aircraft and Auto Industries in Europe," Post-Print hal-00153097, HAL.
  • Handle: RePEc:hal:journl:hal-00153097
    as

    Download full text from publisher

    To our knowledge, this item is not available for download. To find whether it is available, there are three options:
    1. Check below whether another version of this item is available online.
    2. Check on the provider's web page whether it is in fact available.
    3. Perform a search for a similarly titled item that would be available.

    Other versions of this item:

    References listed on IDEAS

    as
    1. Langlois, Richard N., 2002. "Modularity in technology and organization," Journal of Economic Behavior & Organization, Elsevier, vol. 49(1), pages 19-37, September.
    2. Giuseppe Volpato, 2004. "The OEM-FTS relationship in automotive industry," International Journal of Automotive Technology and Management, Inderscience Enterprises Ltd, vol. 4(2/3), pages 166-197.
    3. Vincent Frigant & Yannick Lung, 2002. "Geographical proximity and supplying relationships in modular production," International Journal of Urban and Regional Research, Wiley Blackwell, vol. 26(4), pages 742-755, December.
    4. Timothy J. Sturgeon, 2002. "Modular production networks: a new American model of industrial organization," Industrial and Corporate Change, Oxford University Press and the Associazione ICC, vol. 11(3), pages 451-496, June.
    5. Vincent Frigant, 2005. "Vanishing hand versus Systems integrators - Une revue de la littérature sur l'impact organisationnel de la modularité," Revue d'Économie Industrielle, Programme National Persée, vol. 109(1), pages 29-52.
    6. Akira Takeishi & Takahiro Fujimoto, 2001. "Modularization in the Auto Industry: Interlinked Multiple Hierarchies of Product, Production, and Supplier Systems," CIRJE F-Series CIRJE-F-107, CIRJE, Faculty of Economics, University of Tokyo.
    7. Richard N. Langlois, 2003. "The vanishing hand: the changing dynamics of industrial capitalism," Industrial and Corporate Change, Oxford University Press and the Associazione ICC, vol. 12(2), pages 351-385, April.
    8. Peter Galvin & Andre Morkel, 2001. "Modularity On Industry Structure: The Case Of The World The Effect Of Product Bicycle Industry," Industry and Innovation, Taylor & Francis Journals, vol. 8(1), pages 31-47.
    9. Takeishi, Akira & 武石, 彰 & Fujimoto, Takahiro & 藤本, 隆宏, 2001. "Modularization in the Auto Industry: Interlinked Multiple Hierarchies of Product, Production, and Supplier Systems," IIR Working Paper 01-02, Institute of Innovation Research, Hitotsubashi University.
    10. Mario Sergio Salerno, 2001. "The characteristics and the role of modularity in the automotive business," International Journal of Automotive Technology and Management, Inderscience Enterprises Ltd, vol. 1(1), pages 92-107.
    11. Carliss Y. Baldwin & Kim B. Clark, 2000. "Design Rules, Volume 1: The Power of Modularity," MIT Press Books, The MIT Press, edition 1, volume 1, number 0262024667, April.
    12. Langlois, Richard N. & Robertson, Paul L., 1992. "Networks and innovation in a modular system: Lessons from the microcomputer and stereo component industries," Research Policy, Elsevier, vol. 21(4), pages 297-313, August.
    13. Vincent Frigant, 2005. "Vanishing Hand versus Systems Integrators. Une revue de la littérature sur l'impact organisationnel de la modularité," Post-Print hal-00204242, HAL.
    14. Richard N. Langlois, 2004. "Competition through Institutional Form: the Case of Cluster Tool Standards," Working papers 2004-10, University of Connecticut, Department of Economics.
    15. Frenken, Koen, 2000. "A complexity approach to innovation networks. The case of the aircraft industry (1909-1997)," Research Policy, Elsevier, vol. 29(2), pages 257-272, February.
    16. Bonaccorsi, Andrea & Giuri, Paola, 2001. "The long-term evolution of vertically-related industries," International Journal of Industrial Organization, Elsevier, vol. 19(7), pages 1053-1083, July.
    17. Francois Fourcade & Christophe Midler, 2004. "Modularisation in the auto industry: can manufacturer's architectural strategies meet supplier's sustainable profit trajectories?," International Journal of Automotive Technology and Management, Inderscience Enterprises Ltd, vol. 4(2/3), pages 240-260.
    18. Brusoni, Stefano & Prencipe, Andrea, 2001. "Unpacking the Black Box of Modularity: Technologies, Products and Organizations," Industrial and Corporate Change, Oxford University Press and the Associazione ICC, vol. 10(1), pages 179-205, March.
    19. Dieter Ernst, 2005. "Limits to Modularity: Reflections on Recent Developments in Chip Design," Industry and Innovation, Taylor & Francis Journals, vol. 12(3), pages 303-335.
    20. Ulrich, Karl, 1995. "The role of product architecture in the manufacturing firm," Research Policy, Elsevier, vol. 24(3), pages 419-440, May.
    21. Schaefer, Scott, 1999. "Product design partitions with complementary components," Journal of Economic Behavior & Organization, Elsevier, vol. 38(3), pages 311-330, March.
    22. Jean-Jacques Chanaron, 2001. "Implementing technological and organisational innovations and management of core competencies: lessons from the automotive industry," International Journal of Automotive Technology and Management, Inderscience Enterprises Ltd, vol. 1(1), pages 128-144.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Vincent FRIGANT (E3i, IFReDE-GRES), 2005. "Proximities in Modular Production: an Analysis of the Globalization of the Automotive Fisrt Tier Suppliers (In French)," Cahiers du GRES (2002-2009) 2005-11, Groupement de Recherches Economiques et Sociales.
    2. Vincent Frigant & Damien Talbot, 2003. "Convergence et diversité du passage à la production modulaire dans l'aéronautique et l'automobile en Europe," Post-Print hal-00246171, HAL.
    3. Vincent FRIGANT, 2007. "Between Internationalisation and Proximity: the internationalisation process of automotive first tier suppliers," Cahiers du GREThA (2007-2019) 2007-13, Groupe de Recherche en Economie Théorique et Appliquée (GREThA).
    4. Vincent Frigant, 2005. "Vanishing hand versus Systems integrators - Une revue de la littérature sur l'impact organisationnel de la modularité," Revue d'Économie Industrielle, Programme National Persée, vol. 109(1), pages 29-52.
    5. Frigant, 2004. "Modularity: the foundations of an architect firm? (In French)," Industrial Organization 0405002, University Library of Munich, Germany.
    6. Vincent Frigant, 2007. "L'impact de la production modulaire sur l'approfondissement de la Division Internationale des Processus Productifs (DIPP)," Revue d'économie politique, Dalloz, vol. 117(6), pages 937-961.
    7. Vincent FRIGANT & Stéphanie PERES & Stéphane VIROL, 2012. "How do SMEs to rise at the top of the supply chain? An econometric exploration of the French auto industry (In French)," Cahiers du GREThA (2007-2019) 2012-16, Groupe de Recherche en Economie Théorique et Appliquée (GREThA).
    8. Hua Wang, 2008. "Innovation in product architecture—A study of the Chinese automobile industry," Asia Pacific Journal of Management, Springer, vol. 25(3), pages 509-535, September.
    9. Anna Cabigiosu, 2018. "When do modular dominant designs emerge? A theoretical framework," Working Papers 05, Venice School of Management - Department of Management, Università Ca' Foscari Venezia.
    10. Vincent Frigant & Damien Talbot, 2007. "Proximites Et Logique Modulaire Dans L'Automobile Et L'Aeronautique : Vers Une Dualisation Des Espaces D'Approvisionnement," Post-Print hal-02376436, HAL.
    11. Frédéric Mazaud, 2006. "De la firme sous-traitante de premier rang à la firme pivot. Une mutation de l'organisation du système productif « Airbus »," Revue d'économie industrielle, De Boeck Université, vol. 0(1), pages 3-3.
    12. Frédéric MAZAUD (LEREPS-GRES) & Marie LAGASSE (AIRBUS-FRANCE), 2007. "Vertical sub-contracting relationships strategy, the Airbus First-tier suppliers\' coordination," Cahiers du GRES (2002-2009) 2007-02, Groupement de Recherches Economiques et Sociales.
    13. Med Kechidi, 2019. "From A300 to A350: technical and organisational innovation trajectory of Airbus," Post-Print hal-02025656, HAL.
    14. Vincent FRIGANT, 2013. "Une comparaison de l’internationalisation des chaînes d’approvisionnement automobiles allemande et française," Cahiers du GREThA (2007-2019) 2013-09, Groupe de Recherche en Economie Théorique et Appliquée (GREThA).
    15. Andreas Reinstaller, 2012. "Modularity and its Implications for the Theory of the Firm," Chapters, in: Michael Dietrich & Jackie Krafft (ed.), Handbook on the Economics and Theory of the Firm, chapter 32, Edward Elgar Publishing.
    16. Vincent FRIGANT, 2009. "Is the automotive supply chain compatible with Corporate Social Responsible practices? (In French)," Cahiers du GREThA (2007-2019) 2009-08, Groupe de Recherche en Economie Théorique et Appliquée (GREThA).
    17. Cédric Durand & David Flacher & Vincent Frigant, 2018. "Étudier les chaînes globales de valeur comme une forme d’organisation industrielle," Revue d'économie industrielle, De Boeck Université, vol. 0(3), pages 13-34.
    18. Cabigiosu, Anna & Zirpoli, Francesco & Camuffo, Arnaldo, 2013. "Modularity, interfaces definition and the integration of external sources of innovation in the automotive industry," Research Policy, Elsevier, vol. 42(3), pages 662-675.
    19. Leonardo Bargigli, 2005. "The limits of modularity in innovation and production," KITeS Working Papers 176, KITeS, Centre for Knowledge, Internationalization and Technology Studies, Universita' Bocconi, Milano, Italy, revised Sep 2005.
    20. Marie CORIS & Vincent FRIGANT & Yannick LUNG, 2009. "Organizational change and institutional diversity (In French)," Cahiers du GREThA (2007-2019) 2009-23, Groupe de Recherche en Economie Théorique et Appliquée (GREThA).

    More about this item

    JEL classification:

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:hal:journl:hal-00153097. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: CCSD (email available below). General contact details of provider: https://hal.archives-ouvertes.fr/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.