[go: up one dir, main page]
More Web Proxy on the site http://driver.im/Jump to content

Li-Fi

From Wikipedia, the free encyclopedia
Not to be confused with Wi-Fi.

Li-Fi Technology
IntroducedMarch 2011; 13 years ago (2011-03)
IndustryDigital Communication
Connector typeVisible light communication
Physical rangevisible light spectrum, ultraviolet and infrared radiation

Li-Fi (also written as LiFi) is a wireless communication technology which utilizes light to transmit data and position between devices. The term was first introduced by Harald Haas during a 2011 TEDGlobal talk in Edinburgh.[1]

Li-Fi is a light communication system that is capable of transmitting data at high speeds over the visible light, ultraviolet, and infrared spectrums. In its present state, only LED lamps can be used for the transmission of data in visible light.[2]

In terms of its end user, the technology is similar to Wi-Fi – the key technical difference being that Wi-Fi uses radio frequency to induce an electric tension in an antenna to transmit data, whereas Li-Fi uses the modulation of light intensity to transmit data. Li-Fi is able to function in areas otherwise susceptible to electromagnetic interference (e.g. aircraft cabins, hospitals, or the military).[3]

Technology details

[edit]
Li-Fi modules

Li-Fi is a derivative of optical wireless communications (OWC) technology, which uses light from light-emitting diodes (LEDs) as a medium to deliver network, mobile, high-speed communication in a similar manner to Wi-Fi.[4] The Li-Fi market was projected to have a compound annual growth rate of 82% from 2013 to 2018 and to be worth over $6 billion per year by 2018.[5] However, the market has not developed as such and Li-Fi remains with a niche market.[6]

Visible light communications (VLC) works by switching the current to the LEDs off and on at a very high speed, beyond the human eye's ability to notice.[7] Technologies that allow roaming between various Li-Fi cells, also known as handover, may allow to seamlessly transition between Li-Fi. The light waves cannot penetrate walls which translates to a much shorter range, and a lower hacking potential, relative to Wi-Fi.[8][9] Direct line of sight is not always necessary for Li-Fi to transmit a signal and light reflected off walls can achieve 70 Mbit/s.[10][11]

Li-Fi can potentially be useful in electromagnetic sensitive areas without causing electromagnetic interference.[8][12][9] Both Wi-Fi and Li-Fi transmit data over the electromagnetic spectrum, but whereas Wi-Fi utilizes radio waves, Li-Fi uses visible, ultraviolet, and infrared light.[13] Researchers have reached data rates of over 224 Gbit/s,[14] which was much faster than typical fast broadband in 2013.[15][16] Li-Fi is expected to be ten times cheaper than Wi-Fi.[17] The first commercially available Li-Fi system was presented at the 2014 Mobile World Congress in Barcelona.

Disadvantages

[edit]

Although Li-Fi LEDs would have to be kept on to transmit data, they could be dimmed to below human visibility while still emitting enough light to carry data.[17] This is also a major bottleneck of the technology when based on the visible spectrum, as it is restricted to the illumination purpose and not ideally adjusted to a mobile communication purpose, given that other sources of light, for example the sun, will interfere with the signal.[18]

Since Li-Fi's short wave range is unable to penetrate walls, transmitters would need to be installed in every room of a building to ensure even Li-Fi distribution. The high installation costs associated with this requirement to achieve a level of practicality of the technology is one of the potential downsides.[5][7][19]

History

[edit]

The initial research on Visible Light Communication (VLC) was published by the Fraunhofer Heinrich-Hertz-Institute in September 2009, showcasing data rates of 125 Mbit/s over a 5 m distance using a standard white LED.[20] In 2010, transmission rates were already increased to 513 Mbit/s using the DMT modulation format.[21]

During his 2011 TED Global Talk, Professor Harald Haas, a Mobile Communications expert at the University of Edinburgh, introduced the term "Li-Fi" while discussing the concept of "wireless data from every light".[22]

The general term "visible light communication" (VLC), whose history dates back to the 1880s, includes any use of the visible light portion of the electromagnetic spectrum to transmit information. The D-Light project, funded from January 2010 to January 2012 at Edinburgh's Institute for Digital Communications, was instrumental in advancing this technology, with Haas also contributing to the establishment of a company for its commercialization.[23][24]

In October 2011, the Fraunhofer IPMS research organization and industry partners formed the Li-Fi Consortium, to promote high-speed optical wireless systems and to overcome the limited amount of radio-based wireless spectrum available by exploiting a completely different part of the electromagnetic spectrum.[25]

The practical demonstration of VLC technology using Li-Fi[26] took place in 2012, with transmission rates exceeding 1 Gbit/s achieved under laboratory conditions.[27] In 2013, laboratory tests achieved speed of up to 10 Gbit/s. By August 2013, data rates of approximately 1.6 Gbit/s were demonstrated over a single color LED.[28] A significant milestone was reached in September 2013 when it was stated that Li-Fi, or VLC systems in general, did not absolutely require line-of-sight conditions.[29] In October 2013, it was reported Chinese manufacturers were working on Li-Fi development kits.[30]

In April 2014, the Russian company Stins Coman announced the BeamCaster Li-Fi wireless local network, capable of data transfer speeds up to 1.25 gigabytes per second (GB/s). They foresee boosting speeds up to 5 GB/s in the near future.[31] In the same year, Sisoft, a Mexican company, set a new record by transferring data at speeds of up to 10 GB/s across a light spectrum emitted by LED lamps.[32]

The advantages of operating detectors such as APDs in Geiger-mode as single photon avalanche diode (SPAD) were demonstrated in May 2014, highlighting enhanced energy efficiency and receiver sensitivity .[33] This operational mode also facilitated quantum-limited sensitivity, enabling receivers to detect weak signals from considerable distances.[34]

In June 2018, Li-Fi successfully underwent testing at a BMW plant in Munich for industrial applications under the auspices of the Fraunhofer Heinrich-Hertz-Institute.[35]

In August 2018, Kyle Academy in Scotland, piloted the usage within its premises, enabling students to receive data through rapid on–off transitions of room lighting.[36]

In June 2019, Oledcomm, a French company, showcased its Li-Fi technology at the 2019 Paris Air Show.[37]

Standards

[edit]

Like Wi-Fi, Li-Fi is wireless and uses similar 802.11 protocols, but it also uses ultraviolet, infrared and visible light communication.[38]

One part of VLC is modeled after communication protocols established by the IEEE 802 workgroup. However, the IEEE 802.15.7 standard is out-of-date: it fails to consider the latest technological developments in the field of optical wireless communications, specifically with the introduction of optical orthogonal frequency-division multiplexing (O-OFDM) modulation methods which have been optimized for data rates, multiple-access, and energy efficiency.[39] The introduction of O-OFDM means that a new drive for standardization of optical wireless communications is required.[citation needed]

Nonetheless, the IEEE 802.15.7 standard defines the physical layer (PHY) and media access control (MAC) layer. The standard is able to deliver enough data rates to transmit audio, video, and multimedia services. It takes into account optical transmission mobility, its compatibility with artificial lighting present in infrastructures, and the interference which may be generated by ambient lighting. The MAC layer permits using the link with the other layers as with the TCP/IP protocol.[citation needed]

The standard defines three PHY layers with different rates:

  • The PHY 1 was established for outdoor application and works from 11.67 kbit/s to 267.6 kbit/s.
  • The PHY 2 layer permits reaching data rates from 1.25 Mbit/s to 96 Mbit/s.
  • The PHY 3 is used for many emissions sources with a particular modulation method called color shift keying (CSK). PHY III can deliver rates from 12 Mbit/s to 96 Mbit/s.[40]

The modulation formats recognized for PHY I and PHY II are on–off keying (OOK) and variable pulse-position modulation (VPPM). The Manchester coding used for the PHY I and PHY II layers includes the clock inside the transmitted data by representing a logic 0 with an OOK symbol "01" and a logic 1 with an OOK symbol "10", all with a DC component. The DC component avoids light extinction in case of an extended run of logic 0's.[citation needed]

802.11bb

[edit]
Main article: IEEE 802.11bb

In July 2023, the IEEE published the 802.11bb standard for light-based networking, intended to provide a vendor-neutral standard for the Li-Fi market.

Potential Applications

[edit]

Home and building automation

[edit]

Many experts foresee a movement towards Li-Fi in homes because it has the potential for faster speeds and its security benefits with how the technology works. Because the light sends the data, the network can be contained in a single physical room or building reducing the possibility of a remote network attack. Though this has more implications in enterprise and other sectors, home usage may be pushed forward with the rise of home automation that requires large volumes of data to be transferred through the local network.[41]

Underwater application

[edit]

Most remotely operated underwater vehicles (ROVs) are controlled by wired connections. The length of their cabling places a hard limit on their operational range, and other potential factors such as the cable's weight and fragility may be restrictive. Since light can travel through water, Li-Fi based communications could offer much greater mobility.[42][unreliable source] Li-Fi's utility is limited by the distance light can penetrate water. Significant amounts of light do not penetrate further than 200 meters. Past 1000 meters, no light penetrates.[43]

Aviation

[edit]

Efficient communication of data is possible in airborne environments such as a commercial passenger aircraft utilizing Li-Fi. Using this light-based data transmission will not interfere with equipment on the aircraft that relies on radio waves such as its radar lifi connectivity.[44]

Hospital

[edit]

Increasingly, medical facilities are using remote examinations and even procedures. Li-Fi systems could offer a better system to transmit low latency, high volume data across networks.[citation needed] Besides providing a higher speed, light waves also have reduced effects on medical instruments. An example of this would be the possibility of wireless devices being used in MRIs similar radio sensitive procedures.[44] Another application of LiFi in hospitals is localisation of assets and personnel.[45]

Vehicles

[edit]

Vehicles could communicate with one another via front and back lights to increase road safety. Street lights and traffic signals could also provide information about current road situations.[46]

Outdoor Use

[edit]

Due to the specific properties of light, the optical beams can be bundled especially well in comparison to radio-based devices, allowing highly directional Li-Fi systems to be implemented. Devices have been developed for outdoor use that make it more difficult to access the data due to their low beam angle, thus increasing the security of the transmission. These can be used, for example, for building-to-building communication or for networking small radio cells.

Industrial automation

[edit]

Anywhere in industrial areas data has to be transmitted, Li-Fi is capable of replacing slip rings, sliding contacts, and short cables, such as Industrial Ethernet. Due to the real-time of Li-Fi (which is often required for automation processes), it is also an alternative to common industrial Wireless LAN standards. Fraunhofer IPMS, a research organization in Germany states that they have developed a component which is very appropriate for industrial applications with time-sensitive data transmission.[47]

Advertising

[edit]

Street lamps can be used to display advertisements for nearby businesses or attractions on cellular devices as an individual passes through. A customer walking into a store and passing through the store's front lights can show current sales and promotions on the customer's cellular device.[48]

Warehousing

[edit]

In warehousing, indoor positioning and navigation is a crucial element. 3D positioning helps robots to get a more detailed and realistic visual experience. Visible light from LED bulbs is used to send messages to the robots and other receivers and hence can be used to calculate the positioning of the objects.[49]

See also

[edit]

References

[edit]
  1. ^ Harald Haas (2 August 2011). "Harald Haas: Wireless data from every light bulb". ted.com. Archived from the original on 8 June 2017.
  2. ^ "Comprehensive Summary of Modulation Techniques for LiFi". lifi.eng.ed.ac.uk. Retrieved 16 January 2018.
  3. ^ Tsonev, Dobroslav; Videv, Stefan; Haas, Harald (18 December 2013). "Light fidelity (Li-Fi): towards all-optical networking". Proc. SPIE. Broadband Access Communication Technologies VIII. 9007 (2). Broadband Access Communication Technologies VIII: 900702. Bibcode:2013SPIE.9007E..02T. CiteSeerX 10.1.1.567.4505. doi:10.1117/12.2044649. S2CID 1576474.
  4. ^ Sherman, Joshua (30 October 2013). "How LED Light Bulbs could replace Wi-Fi". Digital Trends. Archived from the original on 27 November 2015. Retrieved 29 November 2015.
  5. ^ a b "Global Visible Light Communication (VLC)/Li-Fi Technology Market worth $6,138.02 Million by 2018". MarketsandMarkets. 10 January 2013. Archived from the original on 8 December 2015. Retrieved 29 November 2015.
  6. ^ "LiFi : Mainstream or niche technology? – Novus Light Today". novuslight.com. 12 December 2018. Retrieved 14 June 2022.
  7. ^ a b Coetzee, Jacques (13 January 2013). "LiFi beats Wi-Fi with 1Gb wireless speeds over pulsing LEDs". Gearburn. Archived from the original on 5 December 2015. Retrieved 29 November 2015.
  8. ^ a b Li-Fi – Internet at the Speed of Light, by Ian Lim, the gadgeteer, dated 29 August 2011 Archived 1 February 2012 at the Wayback Machine
  9. ^ a b "Visible-light communication: Tripping the light fantastic: A fast and cheap optical version of Wi-Fi is coming". The Economist. 28 January 2012. Archived from the original on 21 October 2013. Retrieved 9 March 2021.
  10. ^ "The internet on beams of LED light". The Science Show. 7 December 2013. Archived from the original on 22 July 2017.
  11. ^ "PureLiFi aims at combating cyber crime". Ads Advance. Archived from the original on 9 October 2017.
  12. ^ "Li-Fi: A green avatar of Wi-Fi". Mint. 9 January 2016. Archived from the original on 25 February 2016. Retrieved 24 February 2016.
  13. ^ Haas, Harald (19 April 2013). "High-speed wireless networking using visible light". SPIE Newsroom. doi:10.1117/2.1201304.004773. S2CID 54687970.
  14. ^ "LiFi internet breakthrough: 224Gbps connection broadcast with an LED bulb". 16 February 2015.
  15. ^ Vincent, James (29 October 2013). "Li-Fi revolution: internet connections using light bulbs are 250 times". The Independent. London. Archived from the original on 1 December 2015. Retrieved 29 November 2015.
  16. ^ "'LiFi is high speed bi-directional networked and mobile communication of data using light. LiFi comprises of multiple light bulbs that form a wireless network, offering a substantially similar user experience to Wi-Fi except using the light spectrum.Li-fi' via LED light bulb data speed breakthrough". BBC News. 28 October 2013. Archived from the original on 1 January 2016. Retrieved 29 November 2015.
  17. ^ a b Condliffe, Jamie (28 July 2011). "Will Li-Fi be the new Wi-Fi?". New Scientist. Archived from the original on 31 May 2015.
  18. ^ "What are the advantages and disadvantages of Li-Fi technolog". Techopedia.com. Retrieved 14 June 2022.
  19. ^ Stephanie (2 December 2015). "Why Li-Fi Won't Replace Your Wi-Fi Router Any Time Soon". Retrieved 14 June 2022.
  20. ^ "125 Mbit/s over 5 m wireless distance by use of OOK-Modulated phosphorescent white LEDs". IEEE Xplore. 20 September 2009. Retrieved 11 September 2024.
  21. ^ Vucic, Jelena; Kottke, Christoph; Nerreter, Stefan; Langer, Klaus-Dieter; Walewski, Joachim W. (25 October 2010). "513 Mbit/s Visible Light Communications Link Based on DMT-Modulation of a White LED". Journal of Lightwave Technology. 28 (24): 3512. Bibcode:2010JLwT...28.3512V. doi:10.1109/JLT.2010.2089602. Retrieved 11 September 2024.
  22. ^ "Wireless data from every light bulb". 2 August 2011. Archived from the original on 2 February 2016. Retrieved 2 February 2016.
  23. ^ Povey, Gordon. "About Visible Light Communications". pureVLC. Archived from the original on 18 August 2013. Retrieved 22 October 2013.
  24. ^ Haas, Harald (July 2011). "Wireless data from every light bulb". TED Global. Edinburgh, Scotland. Archived from the original on 8 June 2017.
  25. ^ Povey, Gordon (19 October 2011). "Li-Fi Consortium is Launched". D-Light Project. Archived from the original on 18 August 2013. Retrieved 22 October 2013.
  26. ^ Watts, Michael (31 January 2012). "Meet Li-Fi, the LED-based alternative to household Wi-Fi". Wired Magazine. Archived from the original on 25 May 2016.
  27. ^ Kottke, Christoph (16 September 2012). "1.25 Gbit/s visible light WDM link based on DMT modulation of a single RGB LED luminary". IEEE Xplore. doi:10.1364/ECEOC.2012.We.3.B.4.
  28. ^ pureVLC (6 August 2012). "pureVLC Demonstrates Li-Fi Streaming along with Research Supporting World's Fastest Li-Fi Speeds up to 6 Gbit/s". Press release. Edinburgh. Archived from the original on 23 October 2013. Retrieved 22 October 2013.
  29. ^ purelifi.com (10 September 2013). "pureVLC Demonstrates Li-Fi Using Reflected Light". Edinburgh. Archived from the original on 29 June 2016. Retrieved 17 June 2016.
  30. ^ Thomson, Iain (18 October 2013). "Forget Wi-Fi, boffins get 150Mbps Li-Fi connection from lightbulbs: Many (Chinese) hands make light work". The Register. Archived from the original on 22 October 2013. Retrieved 22 October 2013.
  31. ^ "Li-Fi internet solution from Russian company attracting foreign clients". July 2014.
  32. ^ Vega, Anna (14 July 2014). "Li-fi record data transmission of 10GBps set using LED lights". Engineering and Technology Magazine. Archived from the original on 25 November 2015. Retrieved 29 November 2015.
  33. ^ Chitnis, D.; Collins, S. (1 May 2014). "A SPAD-Based Photon Detecting System for Optical Communications". Journal of Lightwave Technology. 32 (10): 2028–2034. Bibcode:2014JLwT...32.2028.. doi:10.1109/JLT.2014.2316972. ISSN 0733-8724.
  34. ^ "Highly Sensitive Photon Counting Receivers for Li-Fi Systems – Lifi Research and Development Centre". Lifi Research and Development Centre. 3 July 2015. Archived from the original on 17 November 2016. Retrieved 17 November 2016.
  35. ^ "Li-Fi passes industrial test with BMW's robotic tools". eeNews Europe. 15 June 2018. Retrieved 24 June 2019.
  36. ^ Peakin, Will (28 August 2018). "Kyle Academy first school in world using light to create wireless networks". FutureScot. Retrieved 30 June 2019.
  37. ^ "High-speed LiFi will soon be available on Air France flights". Engadget. 12 June 2019. Retrieved 30 June 2019.
  38. ^ "What Is LiFi And How It's Work – Bolly Movie Review Tech". 4 January 2022. Retrieved 3 August 2023.
  39. ^ Tsonev, D.; Sinanovic, S.; Haas, Harald (15 September 2013). "Complete Modeling of Nonlinear Distortion in OFDM-Based Optical Wireless Communication". Journal of Lightwave Technology. 31 (18): 3064–3076. Bibcode:2013JLwT...31.3064T. doi:10.1109/JLT.2013.2278675. S2CID 532295.
  40. ^ An IEEE Standard for Visible Light Communications Archived 29 August 2013 at the Wayback Machine visiblelightcomm.com, dated April 2011. It is superfast modern intelnet technology.
  41. ^ "LiFi Technology". pureLiFi. Retrieved 16 April 2021.
  42. ^ "Li – Fi Technology, Implementations and Applications" (PDF). International Research Journal of Engineering and Technology (IRJET). Archived (PDF) from the original on 17 November 2016.
  43. ^ "How far does light travel in the ocean?". Archived from the original on 31 January 2017. Retrieved 4 February 2017.
  44. ^ a b Ayara, W. A.; Usikalu, M. R.; Akinyemi, M. L.; Adagunodo, T. A.; Oyeyemi, K. D. (July 2018). "Review on Li-Fi: an advancement in wireless network communication with the application of solar power". IOP Conference Series: Earth and Environmental Science. 173 (1): 012016. Bibcode:2018E&ES..173a2016A. doi:10.1088/1755-1315/173/1/012016. ISSN 1755-1315.
  45. ^ "Ellipz LiFi medical – real time indoor positioning (RTLS) with LiFi". medicallifi.io. Retrieved 24 December 2021.
  46. ^ "Applications of Li-Fi – pureLiFi™". pureLiFi. Archived from the original on 20 November 2016. Retrieved 15 November 2016.
  47. ^ Happich, Julien. "Fraunhofer IPMS pushes Li-Fi to 12.5Gbit/s for industrial use". European Business Press SA. André Rousselot. Retrieved 13 November 2017.
  48. ^ Swami, Nitin Vijaykumar; Sirsat, Narayan Balaji; Holambe, Prabhakar Ramesh (2017). Light Fidelity (Li-Fi): In Mobile Communication and Ubiquitous Computing Applications. Springer Singapore. ISBN 978-981-10-2630-0.
  49. ^ "5 Essential Technologies for Inventory Control in a Warehouse Contract". publication.sipmm.edu.sg. 16 April 2019. Retrieved 8 April 2022.
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Li-Fi&oldid=1253483306"