TWM620029U - Drip plate for building wall - Google Patents

Abstract

This creation provides a drip sheet for the exterior wall of a building, which includes: a plate body, at the end of one side edge, a water guiding part is arranged toward the bottom of the plate body; the abutting end of the plate body is provided with a single stop part, And the stop part is parallel to the water guide part, and a positioning part parallel to the board is transversely provided at the bottom of the stop part; thereby, the present creation can be installed in a building through the stop part and the positioning part. The edge of the outer wall and the wall of the building’s outer wall through the water guide part, so that rainwater can directly drip to the ground along the board and the water guide part, and prevent rainwater from penetrating into the wall of the building, making the building’s outer wall difficult Produce water marks to maintain the aesthetics of the wall of the building; and the provision of a single stop can help reduce its manufacturing cost, and facilitate stacking and transportation, and it is easier to adjust the protrusion of the water guide on the building during installation The distance between external walls to enhance the convenience during construction.

Description

Drip sheet on the exterior wall of the building

This creation is a kind of drip sheet on the exterior wall of a building, especially one that is installed on the top edge of a building, and through the installation of the water guiding part, so that rainwater can slide off the side edge of the water guiding part without adhering to the outer wall of the building.

According to, the structural material of a building is its main structure, which is used to support and build the main structure of the building. Its materials usually include metal, wood, stone, cement, concrete and other building materials, and in response to changes in the weather, building materials are usually Waterproof treatment is required to prevent rainwater from directly infiltrating into the structural materials of the building in rainy days; however, when rainwater falls on the building for a long time, it will still cause the coating of the waterproof treatment to be worn out. Therefore, the building still needs to be applied regularly Waterproof treatment to maintain its anti-seepage effect.

However, the price of building waterproof treatment is high, and how to use physical rain protection to extend the durability of the waterproof treatment is an important issue; in addition, the turning points of the exterior wall of the building, such as: the edge of the top of the building, the window sill, Balconies, etc., due to their fragile structure, make it easier to wear after being waterproofed; and even if the waterproof coating is not peeled off, the rainwater still inevitably adheres to the surface, and the air usually contains dust and dust. Dirt, therefore, after rain, it will cause dirt to adhere to the surface of the building’s exterior wall, which will affect the aesthetics of the building’s appearance.

Therefore, the conventional knowledge provides a kind of "drip sheet for building exterior wall", which is similar to the patent certificate No. M372365 of our country. Prevent rainwater from adhering to the wall and protect the corners of the building; and the bottom end of the cover sheet is equipped with two ribs to be combined with the top edge of the building, so that the ribs can be inserted through the setting of the ribs. Set in the adhesive to position the drip sheet; however, the arrangement of the two ribs will make it difficult to stack during transportation, and because the length of the cover sheet in the lateral direction is limited, the provision of two ribs will limit The space between the water guide plate and the outer wall can be adjusted to limit its applicability. Furthermore, an accommodating space will be formed between the two protruding ribs. Therefore, when the adhesive is inserted into the adhesive, the accommodating space There is air, but it cannot be effectively discharged, which prevents the adhesive from entering the accommodating space between the two convex ribs, which will affect the adhesion ability of the drip sheet and make it doubtful that the fixing strength is insufficient.

In view of this, the creator specially researched and improved the physical waterproof structure of the building, hoping to improve the above problems with a better creation, and after long-term research and development and continuous testing, the creation of this creation came out.

In order to solve the aforementioned problems, our creators provide a drip sheet for the exterior wall of a building, which contains: a plate body, which is located at the end of one side edge, towards the bottom of the building. A water guiding part is provided; the plate body is provided with a single stop part at the abutting end, and the stop part is corresponding to the water guiding part, and a positioning part parallel to the plate is transversely arranged at the bottom of the stop part.

According to the drip sheet on the outer wall of the building mentioned above, the water guiding part and the board are arranged perpendicular to each other.

According to the above-mentioned drip sheet on the exterior wall of a building, the plate body, the water guiding part, the stop part and the positioning part are integrally formed.

According to the above-mentioned drip sheet on the exterior wall of the building, the plate body, the water guiding part, the stop part and the positioning part are made of metal.

According to the drip sheet on the outer wall of the building mentioned above, the positioning part is formed in a T-shaped arrangement with the stop part.

Based on the above description and settings, it is obvious that this creation mainly has the following advantages and functions, which are detailed as follows:

1. This creation through the setting of a single stop part can help reduce the overall manufacturing cost, and facilitate stacking and transportation, and during installation, the adhesive is easier and surely covered and adhered to the stop part, so as to enhance the creation Stability after erection; in addition, a single stop can increase the installation space, making it easier to adjust the distance between the water guide and the outer wall of the building according to the installation form and structure conditions of the building, so as to improve the construction time The convenience.

2. This creation system can be installed on the edge of a building's outer wall through the stopper and the positioning portion, and project through the water guide to the wall of the building's outer wall, so that rainwater can be directly along the board and the water guide It drips on the ground to reduce the probability of rainwater adhering to the side walls of the building, and can protect the turning points of the edge of the building. It can prevent rainwater from penetrating into the wall of the building, so that the outer wall of the building is not easy to produce water marks, so as to maintain the building. The aesthetics of the wall can help to improve the useful life of the waterproof treatment of the building.

1: Board body

11: Water guide

12: Stop

13: Positioning department

2: Building

21: recess

3: Adhesive

Figure 1 is a three-dimensional schematic diagram of this creation.

Figure 2 is a cross-sectional view of this creation installed at the edge of a building and a schematic diagram of its use state.

Figure 3 is a schematic diagram of Figure 2 in the use state when it rains.

This creation is a drip sheet on the exterior wall of a building. Its implementation methods, characteristics and effects are listed below in detail with several preferred and feasible embodiments with the drawings, so that you can understand and agree with this creation in depth. .

First of all, please refer to Figures 1 to 3. This creation is a drip sheet for the exterior wall of a building, which includes: a plate 1 which is arranged in a long strip shape and is located at the end of one side edge , A water guide portion 11 is provided toward the bottom; the plate body 1 is provided with a single stop portion 12 at the abutting end, and the stop portion 12 is parallel to the water guide portion 11, and the bottom of the stop portion 12 is transversely provided with a parallel At the positioning portion 13 of the board 1.

In this way, this creation can be used to be set at the edge of a building 2, and the building 2 can be recessed on the top with a recess 21 corresponding to the stop 12, and the recess 21 can be filled with adhesive 3 If the stopper 12 extends into the recess 21, because the single stopper 12 is provided so that the stopper 12 does not form a space with other objects of itself, the adhesive 3 can be smoothly, reliably and fully adhered On the peripheral surface of the stop part 12 and the positioning part 13, in order to improve the convenience and efficiency of the installation of the invention, the positioning part 13 is arranged laterally. In one embodiment, the positioning part 13 is connected to the stop part. A T-shaped arrangement is formed between the 12, so that when the adhesive 3 is solidified, the stop 12 and the positioning portion 13 can be reliably stabilized, so that the plate 1 is not easily separated from the recess 21 due to force; therefore, this creation uses a single stop The structure of the part 12 effectively improves its stability during positioning.

In addition, through the arrangement of the single stopper 12, there will be sufficient space between it and the water guiding part 11. Therefore, corresponding to the form, structure and conditions of the building 2 and other factors, corresponding recesses can be opened. 21, and make it possible to adjust the distance between the water guiding portion 11 and the outer wall of the building 2 so that this creation has a high degree of applicability and can be applied to most types of buildings 2.

Furthermore, in this creation, during quantitative transportation, one end of the plate body 1 with the stopper 12 can be superimposed on each other, thereby improving the performance during transportation, and because the plate body 1 is only provided with a single stopper 12, it is easy to The superposition and separation between the two plates 1 can improve the efficiency of transportation operations.

Regarding the arrangement between the water guiding portion 11 and the plate body 1, in one embodiment, the water guiding portion 11 and the plate body 1 are arranged perpendicular to each other, so as to facilitate its forming and setting and have better aesthetics; and In terms of forming and manufacturing, in a preferred embodiment, the plate body 1, the water guide portion 11, the stop portion 12, and the positioning portion 13 are integrally formed and arranged in a metal material to facilitate It is molded, and has a high degree of durability and water resistance.

With the foregoing arrangement, as shown in Figures 2 and 3, when the creation is set at the edge of the building 2, the water guiding part 11 is made to protrude from the outer wall of the building 2, and to prevent rainwater from accumulating on the building. 2. Preferably, it can be installed at the slope of the edge of the building 2, so that the board 1 can form an inclination angle with the horizontal plane. Therefore, as shown in Figure 3, when there is a lot of moisture in the rain or the air , The water droplets will slide down from the top of the board 1 to the water guiding portion 11 due to the arrangement of the plate body 1 and the water guiding portion 11, and drip to the ground, so that the water droplets are not easy to touch the wall, and can reduce the rainwater adhering to the building. 2 The probability of the side wall makes the exterior wall of the building 2 less likely to produce water marks. With the aesthetics of the wall of the building 2, it can also reduce the impact of rain on the building 2 so that the waterproof coating of the building 2 is not easily damaged. It can effectively prevent rainwater from penetrating into the wall of building 2, and can help increase the working life of building 2’s waterproof treatment; in addition, the setting of this creation can also protect the weaker edge and turning of building 2, so as to effectively prevent rain Due to the infiltration of the building 2 at its turning point, the outer wall of the building 2 is blackened due to water seepage or the structural strength is affected. Therefore, this creation does have an excellent protective effect on the building 2.

In summary, the technical means disclosed in this creation is not only unprecedented, but also achieves the expected purpose and effect. Therefore, it is both novel and progressive. It is truly a new type in the patent law. In terms of structure, it has indeed met the statutory requirements of the Patent Law, and Yan has filed a new patent application in accordance with the law.

However, the above are only the preferred embodiments of this creation, and should not be used to limit the scope of implementation of this creation, that is to say, all equivalent changes and modifications made in accordance with the scope of patent applications for this creation and the contents of the specification should still be used. It belongs to the scope of this creation patent.

1: Board body

11: Water guide

12: Stop

13: Positioning department

Claims (5)

A drip sheet on the exterior wall of a building, which contains: A plate body, at the end of one side edge, is provided with a water guiding portion toward the bottom; the plate body is provided with a single stop portion at the abutting end, and the stop portion is parallel to the water guiding portion, and the stop A positioning part parallel to the board is horizontally arranged at the bottom of the part. The drip sheet on the exterior wall of a building as described in claim 1, wherein the water guiding part and the board are arranged perpendicular to each other. The drip sheet for the exterior wall of a building according to claim 1, wherein the plate body, the water guiding part, the stop part and the positioning part are integrally formed. The drip sheet for the exterior wall of a building according to claim 1, wherein the plate body, the water guiding part, the stop part and the positioning part are made of metal. The drip sheet for the exterior wall of a building as described in claim 1, wherein the positioning part and the stopping part form a T-shaped arrangement.

Images