[go: up one dir, main page]
More Web Proxy on the site http://driver.im/

Pang, 1994 - Google Patents

High-temperature drying of Pinus radiata boards in a batch kiln.

Pang, 1994

View HTML
Document ID
3970188606360755788
Author
Pang S
Publication year

External Links

Snippet

Abstract In New Zealand, high-temperature drying (ie drying at temperatures higher than 100 C) of softwood boards, particularly Pinus radiata, is widely used because it gives much faster drying than is possible at lower temperatures. However, drying defects limit its use …
Continue reading at ir.canterbury.ac.nz (HTML) (other versions)

Classifications

    • GPHYSICS
    • G01MEASURING; TESTING
    • G01NINVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N1/00Sampling; Preparing specimens for investigation
    • G01N1/02Devices for withdrawing samples
    • G01N1/04Devices for withdrawing samples in the solid state, e.g. by cutting
    • GPHYSICS
    • G01MEASURING; TESTING
    • G01NINVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N1/00Sampling; Preparing specimens for investigation
    • G01N1/28Preparing specimens for investigation including physical details of (bio-)chemical methods covered elsewhere, e.g. G01N33/50, C12Q
    • G01N1/40Concentrating samples
    • GPHYSICS
    • G01MEASURING; TESTING
    • G01NINVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N25/00Investigating or analyzing materials by the use of thermal means
    • G01N25/56Investigating or analyzing materials by the use of thermal means by investigating moisture content

Similar Documents

Publication Publication Date Title
Pang High-temperature drying of Pinus radiata boards in a batch kiln.
Hukka The effective diffusion coefficient and mass transfer coefficient of nordic softwoods as calculated from direct drying experiments
Sander Thin-layer drying of porous materials: Selection of the appropriate mathematical model and relationships between thin-layer models parameters
Simo-Tagne et al. Characterization of sorption behavior and mass transfer properties of four central africa tropical woods: Ayous, Sapele, Frake, Lotofa
Florisson et al. A numerical study of the effect of green-state moisture content on stress development in timber boards during drying
Olek et al. Effects of thermal conductivity data on accuracy of modeling heat transfer in wood
Defo et al. Modeling superheated steam vacuum drying of wood
Azzouz et al. Mass diffusivity of different species of wood in convective drying
Perré et al. Drying at high temperature of sapwood and heartwood: theory, experiment and practical consequence on kiln control
Pang Investigation of effects of wood variability and rheological properties on lumber drying: application of mathematical models
Pang et al. Cooling and steam conditioning after high-temperature drying of Pinus radiata board: experimental investigation and mathematical modelling
Amer et al. Water sorption/desorption kinetics and convective drying of Eucalyptus globulus wood
Haque Modelling of solar kilns and the development of an optimised schedule for drying hardwood timber
Khater et al. Optimization of solar kiln for drying wood
Virta et al. Modelling moisture distribution in wooden cladding board as a result of short-term single-sided water soaking
Davis et al. The influence of compression wood on the drying curves of Pinus radiata dried in dehumidifier conditions
HAN et al. Moisture content change of Korean red pine logs during air drying: II. Prediction of moisture content change of Korean red pine logs under different air drying conditions
Youngman et al. Use of combined constant rate and diffusion model to simulate kiln-drying of Pinus radiata timber
Rozas et al. Internal mass transfer coefficient during drying of softwood (Pinus elliottii Engelm.) boards
Pang Effects of sawing pattern on lumber drying: model simulation and experimental investigation
Aboltins et al. Determination of the mass diffusion coefficient of wood by thin-layer drying kinetics
Dedic Determination of coefficients in the analytical solution of coupled differential equations of heat and mass transfer during convective drying of heat-treated wood
de Souza Mendes et al. Laboratory test for grouping tropical species for kiln drying
Konopka et al. The influence of high temperature wood drying conditions using air-steam mixture on its properties
Liu et al. Simulation of heat and moisture transfer in wood during drying under constant ambient conditions