[go: up one dir, main page]
More Web Proxy on the site http://driver.im/

Kawabata et al., 2016 - Google Patents

Proposal for a new CTOD calculation formula

Kawabata et al., 2016

Document ID
1780062175921965324
Author
Kawabata T
Tagawa T
Sakimoto T
Kayamori Y
Ohata M
Yamashita Y
Tamura E
Yoshinari H
Aihara S
Minami F
Mimura H
Hagihara Y
Publication year
Publication venue
Engineering Fracture Mechanics

External Links

Snippet

A new CTOD calculation method is investigated in this work, considering the variation of crack tip blunting due to strain hardening. The calculation formula is constructed assuming that CTOD 45FEM based on three-dimensional elasto-plastic FEM is the target CTOD to be …
Continue reading at www.sciencedirect.com (other versions)

Classifications

    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/02—Details not specific for a particular testing method
    • G01N2203/0202—Control of the test
    • G01N2203/0212—Theories, calculations
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/02—Details not specific for a particular testing method
    • G01N2203/0202—Control of the test
    • G01N2203/021—Treatment of the signal; Calibration
    • G—PHYSICS
    • G06—COMPUTING; CALCULATING; COUNTING
    • G06F—ELECTRICAL DIGITAL DATA PROCESSING
    • G06F17/00—Digital computing or data processing equipment or methods, specially adapted for specific functions
    • G06F17/50—Computer-aided design
    • G06F17/5009—Computer-aided design using simulation
    • G06F17/5018—Computer-aided design using simulation using finite difference methods or finite element methods
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/02—Details not specific for a particular testing method
    • G01N2203/025—Geometry of the test
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/0058—Kind of property studied
    • G01N2203/006—Crack, flaws, fracture or rupture
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N3/00—Investigating strength properties of solid materials by application of mechanical stress
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N33/00—Investigating or analysing materials by specific methods not covered by the preceding groups
    • G01N33/44—Investigating or analysing materials by specific methods not covered by the preceding groups resins; rubber; leather

Similar Documents

Publication Publication Date Title
Kawabata et al. Proposal for a new CTOD calculation formula
Shlyannikov et al. A creep stress intensity factor approach to creep–fatigue crack growth
Mäde et al. Combined notch and size effect modeling in a local probabilistic approach for LCF
Leitão et al. Determination of local constitutive properties of aluminium friction stir welds using digital image correlation
Kanvinde et al. The void growth model and the stress modified critical strain model to predict ductile fracture in structural steels
Giri et al. On the estimation of error in measuring the residual stress by strain gauge rosette
Seifi et al. Effects of plasticity on residual stresses measurement by hole drilling method
Moharrami et al. Developing a method in measuring residual stress on steel alloys by instrumented indentation technique
Tagawa et al. Experimental measurements of deformed crack tips in different yield-to-tensile ratio steels
Dong et al. Residual stresses in strength-mismatched welds and implications on fracture behavior
Li et al. An investigation on the circumferential surface crack growth in steel pipes subjected to fatigue bending
Macek et al. Fracture surface topography investigation and fatigue life assessment of notched austenitic steel specimens
Teixeira et al. Assessment of characteristic values of the ultimate strength of corroded steel plates with initial imperfections
Chen et al. Cleavage fracture assessment for surface-cracked plates fabricated from high strength steels
Horn et al. An engineering assessment methodology for non-sharp defects in steel structures–Part II: Procedure validation and constraint analysis
Shlyannikov et al. Creep-fatigue crack growth rate assessment using ductility damage model
English et al. Effects of the strain-hardening exponent on two-parameter characterizations of surface-cracks under large-scale yielding
Abedini et al. An investigation into the characterization of the hardening response of sheet metals using tensile and shear tests with surface strain measurement
Wee et al. Modeling of axisymmetric slow crack growth of high-density polyethylene with circular notched bar specimen using crack layer theory
Kawabata et al. Plastic deformation behavior in SEB specimens with various crack length to width ratios
Heydari-Meybodi et al. Averaged strain energy density criterion for rupture assessment of cracked rubbers: a novel method for determination of critical SED
Torabi et al. Mixed mode I-III fracture resistance of stainless steel 316L weakened by V-notches with end holes
Abdollahi et al. Numerical and experimental study of ratcheting in cold expanded plate of Al‐alloy 2024‐T 3 in double shear lap joints
Shlyannikov Critical distance for creep crack growth problems
Duan et al. Two-parameter JA estimation for weld centerline cracks of welded SE (T) specimen under tensile loading