[go: up one dir, main page]
More Web Proxy on the site http://driver.im/

Liu et al., 2001 - Google Patents

An 8-bit 10 MS/s folding and interpolating ADC using the continuous-time auto-zero technique

Liu et al., 2001

View PDF
Document ID
15416390298135656101
Author
Liu M
Liu S
Publication year
Publication venue
IEEE Journal of Solid-State Circuits

External Links

Snippet

An 8-bit 10-MS/s folding and interpolating analog-to-digital converter (ADC) using the continuous-time auto-zero technique is presented. Compared with the conventional architecture, it can improve the nonlinear errors and enhance the signal-to-noise-and …
Continue reading at cc.ee.ntu.edu.tw (PDF) (other versions)

Classifications

    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/36—Analogue value compared with reference values simultaneously only, i.e. parallel type
    • H03M1/361—Analogue value compared with reference values simultaneously only, i.e. parallel type having a separate comparator and reference value for each quantisation level, i.e. full flash converter type
    • H03M1/362—Analogue value compared with reference values simultaneously only, i.e. parallel type having a separate comparator and reference value for each quantisation level, i.e. full flash converter type the reference values being generated by a resistive voltage divider
    • H03M1/365—Analogue value compared with reference values simultaneously only, i.e. parallel type having a separate comparator and reference value for each quantisation level, i.e. full flash converter type the reference values being generated by a resistive voltage divider the voltage divider being a single resistor string
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0675—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy
    • H03M1/0678—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components
    • H03M1/068—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components the original and additional components or elements being complementary to each other, e.g. CMOS
    • H03M1/0682—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components the original and additional components or elements being complementary to each other, e.g. CMOS using a differential network structure, i.e. symmetrical with respect to ground
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/38—Analogue value compared with reference values sequentially only, e.g. successive approximation type
    • H03M1/44—Sequential comparisons in series-connected stages with change in value of analogue signal
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/14—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit
    • H03M1/16—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit with scale factor modification, i.e. by changing the amplification between the steps
    • H03M1/164—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit with scale factor modification, i.e. by changing the amplification between the steps the steps being performed sequentially in series-connected stages
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0634—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by averaging out the errors, e.g. using sliding scale
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/14—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit
    • H03M1/145—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit the steps being performed sequentially in series-connected stages
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/66—Digital/analogue converters
    • H03M1/74—Simultaneous conversion
    • H03M1/80—Simultaneous conversion using weighted impedances
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0602—Continuously compensating for, or preventing, undesired influence of physical parameters of deviations from the desired transfer characteristic
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/66—Digital/analogue converters
    • H03M1/68—Digital/analogue converters with conversions of different sensitivity, i.e. one conversion relating to the more significant digital bits and another conversion to the less significant bits
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/20—Increasing resolution using an n bit system to obtain n + m bits
    • H03M1/202—Increasing resolution using an n bit system to obtain n + m bits by interpolation
    • H03M1/203—Increasing resolution using an n bit system to obtain n + m bits by interpolation using an analogue interpolation circuit
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/08—Continuously compensating for, or preventing, undesired influence of physical parameters of noise
    • H03M1/0863—Continuously compensating for, or preventing, undesired influence of physical parameters of noise of switching transients, e.g. glitches
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/10—Calibration or testing
    • H03M1/1009—Calibration
    • H03M1/1033—Calibration over the full range of the converter, e.g. for correcting differential non-linearity
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03F—AMPLIFIERS
    • H03F3/00—Amplifiers with only discharge tubes or only semiconductor devices as amplifying elements
    • H03F3/45—Differential amplifiers
    • H03F3/45071—Differential amplifiers with semiconductor devices only
    • H03F3/45479—Differential amplifiers with semiconductor devices only characterised by the way of common mode signal rejection
    • H03F3/45928—Differential amplifiers with semiconductor devices only characterised by the way of common mode signal rejection using IC blocks as the active amplifying circuit
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03F—AMPLIFIERS
    • H03F3/00—Amplifiers with only discharge tubes or only semiconductor devices as amplifying elements
    • H03F3/45—Differential amplifiers
    • H03F3/45071—Differential amplifiers with semiconductor devices only
    • H03F3/45076—Differential amplifiers with semiconductor devices only characterised by the way of implementation of the active amplifying circuit in the differential amplifier
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/004—Reconfigurable analogue/digital or digital/analogue converters

Similar Documents

Publication Publication Date Title
Sumanen et al. A 10-bit 200-MS/s CMOS parallel pipeline A/D converter
Mortezapour et al. A 1-V, 8-bit successive approximation ADC in standard CMOS process
Gregoire et al. An over-60 dB true rail-to-rail performance using correlated level shifting and an opamp with only 30 dB loop gain
VorenKamp et al. A 12-b, 60-MSample/s cascaded folding and interpolating ADC
Ingino et al. A continuously calibrated 12-b, 10-MS/s, 3.3-VA/D converter
Li et al. A 1.8-V 67-mW 10-bit 100-MS/s pipelined ADC using time-shifted CDS technique
US5790060A (en) Digital-to-analog converter having enhanced current steering and associated method
Brandt et al. A 75-mW, 10-b, 20-MSPS CMOS subranging ADC with 9.5 effective bits at Nyquist
Yu et al. A 1-V 1.25-GS/S 8-bit self-calibrated flash ADC in 90-nm digital CMOS
Van Der Ploeg et al. A 3.3-V, 10-b, 25-MSample/s two-step ADC in 0.35-/spl mu/m CMOS
US6674389B2 (en) Capacitive folding circuit for use in a folding/interpolating analog-to-digital converter
Petschacher et al. A 10-b 75-MSPS subranging A/D converter with integrated sample and hold
Liu et al. An 8-bit 10 MS/s folding and interpolating ADC using the continuous-time auto-zero technique
Oh et al. A 7-bit two-step flash ADC with sample-and-hold sharing technique
Venes et al. An 80 MHz 80 mW 8 b CMOS folding A/D converter with distributed T/H preprocessing
US7271755B2 (en) Resistor ladder interpolation for PGA and DAC
Chu et al. A 10-bit 200-MS/s Zero-Crossing-Based Pipeline ADC in 0.13-$\mu $ m CMOS Technology
Akter et al. A 66-dB SNDR pipelined split-ADC in 40-nm CMOS using a class-AB residue amplifier
Chang et al. Design techniques for a low-power low-cost CMOS A/D converter
US5880690A (en) Pipeline ADC common-mode tracking circuit
US20050128118A1 (en) DNL/INL trim techniques for comparator based analog to digital converters
US6094093A (en) Low-voltage input buffer
Hsu et al. A 10b 200MS/s pipelined folding ADC with offset calibration
Liechti et al. A 1.8 V 12-bit 230-MS/s pipeline ADC in 0.18 μm CMOS technology
Cho et al. A 10-b 320-MS/s dual-residue pipelined SAR ADC with binary search current interpolator