[go: up one dir, main page]
More Web Proxy on the site http://driver.im/

Ruhrmann et al., 2003 - Google Patents

Influence of diffuser angle on a bluff body in ground effect

Ruhrmann et al., 2003

View PDF
Document ID
13876002992117730358
Author
Ruhrmann A
Zhang X
Publication year
Publication venue
J. Fluids Eng.

External Links

Snippet

The forces and pressures on a generic bluff body in ground effect were investigated. The bluff-body model was equipped with interchangeable underbody diffuser ramps and side plates. Five different diffuser angles were tested: 5, 10, 15, 17, and 20 deg to the horizontal …
Continue reading at eprints.soton.ac.uk (PDF) (other versions)

Classifications

    • YGENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02TCLIMATE CHANGE MITIGATION TECHNOLOGIES RELATED TO TRANSPORTATION
    • Y02T70/00Maritime or waterways transport
    • Y02T70/10Measures concerning design or construction of watercraft hulls
    • Y02T70/12Improving hydrodynamics of hull
    • Y02T70/121Reducing surface friction
    • Y02T70/123Hull coatings, e.g. biomimicry

Similar Documents

Publication Publication Date Title
Schultz et al. Turbulent boundary layers over surfaces smoothed by sanding
Ruhrmann et al. Influence of diffuser angle on a bluff body in ground effect
Zess et al. Computational design and experimental evaluation of using a leading edge fillet on a gas turbine vane
Foeth et al. On the collapse structure of an attached cavity on a three-dimensional hydrofoil
Akilli et al. Control of vortex shedding of circular cylinder in shallow water flow using an attached splitter plate
Sullerey et al. Application of boundary layer fences and vortex generators in improving performance of S-duct diffusers
Uzol et al. Aerodynamic loss characteristics of a turbine blade with trailing edge coolant ejection: Part 2—External aerodynamics, total pressure losses, and predictions
Agelinchaab et al. PIV study of separated and reattached open channel flow over surface mounted blocks
Karasu et al. Performance assessment of transition models for three-dimensional flow over NACA4412 wings at low Reynolds numbers
Forster et al. Numerical investigation into vortex generators on heavily cambered wings
Wang et al. PIV measurement of separated flow in a square channel with streamwise periodic ribs on one wall
Senior et al. The force and pressure of a diffuser-equipped bluff body in ground effect
Zhang et al. Combined effects of surface trips and unsteady wakes on the boundary layer development of an ultra-high-lift LP turbine blade
Jiménez et al. The effects of fins on the intermediate wake of a submarine model
Ma et al. Flow mechanism and characteristics of pressure-equalizing film along the surface of a moving underwater vehicle
Lee et al. Experimental investigation of the aerodynamics and flowfield of a NACA 0015 airfoil over a wavy ground
Ling et al. The effect of land taper angle on trailing edge slot film cooling
Benton et al. Parametric optimization of unsteady end wall blowing on a highly loaded low-pressure turbine
Xia et al. Detached-eddy simulation of ground effect on the wake of a high-speed train
Lu et al. Experimental study of aerodynamics and wingtip vortex of a rectangular wing in flat ground effect
Murayama et al. Unsteady tip leakage vortex cavitation originating from the tip clearance of an oscillating hydrofoil
Kuya et al. Flow physics of a race car wing with vortex generators in ground effect
Balachandar et al. Characteristics of shallow turbulent near wakes at low Reynolds numbers
Byerley et al. Using gurney flaps to control laminar separation on linear cascade blades
Kilavuz et al. Influence of free-surface on wake flow characteristics of a torpedo-like geometry