[go: up one dir, main page]
More Web Proxy on the site http://driver.im/

Li et al., 2023 - Google Patents

Pin-loaded tensile behavior and failure analysis of CF/PEKK composites under extreme temperature

Li et al., 2023

View HTML
Document ID
6321774024624258549
Author
Li X
Kumar S
Hwang D
Shin D
Kim Y
Publication year
Publication venue
Composites Part A: Applied Science and Manufacturing

External Links

Snippet

This study investigated pinned-joint bearing strengths and failure behaviors of carbon-fiber- reinforced polyetherketoneketone (CF/PEKK) composites at different temperatures, with varying the width-to-hole diameter (W/D) and edge distance-to-hole diameter (E/D) ratios …
Continue reading at www.sciencedirect.com (HTML) (other versions)

Classifications

    • B—PERFORMING OPERATIONS; TRANSPORTING
    • B29—WORKING OF PLASTICS; WORKING OF SUBSTANCES IN A PLASTIC STATE, IN GENERAL
    • B29C—SHAPING OR JOINING OF PLASTICS; SHAPING OF MATERIAL IN A PLASTIC STATE, NOT OTHERWISE PROVIDED FOR; AFTER-TREATMENT OF THE SHAPED PRODUCTS, e.g. REPAIRING
    • B29C70/00—Shaping composites, i.e. plastics material comprising reinforcements, fillers or preformed parts, e.g. inserts
    • B29C70/04—Shaping composites, i.e. plastics material comprising reinforcements, fillers or preformed parts, e.g. inserts comprising reinforcements only, e.g. self-reinforcing plastics
    • B29C70/06—Fibrous reinforcements only
    • B29C70/10—Fibrous reinforcements only characterised by the structure of fibrous reinforcements, e.g. hollow fibres
    • B29C70/16—Fibrous reinforcements only characterised by the structure of fibrous reinforcements, e.g. hollow fibres using fibres of substantial or continuous length
    • B29C70/22—Fibrous reinforcements only characterised by the structure of fibrous reinforcements, e.g. hollow fibres using fibres of substantial or continuous length oriented in at least two directions forming a two dimensional structure
    • B—PERFORMING OPERATIONS; TRANSPORTING
    • B29—WORKING OF PLASTICS; WORKING OF SUBSTANCES IN A PLASTIC STATE, IN GENERAL
    • B29C—SHAPING OR JOINING OF PLASTICS; SHAPING OF MATERIAL IN A PLASTIC STATE, NOT OTHERWISE PROVIDED FOR; AFTER-TREATMENT OF THE SHAPED PRODUCTS, e.g. REPAIRING
    • B29C70/00—Shaping composites, i.e. plastics material comprising reinforcements, fillers or preformed parts, e.g. inserts
    • B29C70/04—Shaping composites, i.e. plastics material comprising reinforcements, fillers or preformed parts, e.g. inserts comprising reinforcements only, e.g. self-reinforcing plastics
    • B29C70/28—Shaping operations therefor
    • B—PERFORMING OPERATIONS; TRANSPORTING
    • B29—WORKING OF PLASTICS; WORKING OF SUBSTANCES IN A PLASTIC STATE, IN GENERAL
    • B29C—SHAPING OR JOINING OF PLASTICS; SHAPING OF MATERIAL IN A PLASTIC STATE, NOT OTHERWISE PROVIDED FOR; AFTER-TREATMENT OF THE SHAPED PRODUCTS, e.g. REPAIRING
    • B29C70/00—Shaping composites, i.e. plastics material comprising reinforcements, fillers or preformed parts, e.g. inserts
    • B29C70/04—Shaping composites, i.e. plastics material comprising reinforcements, fillers or preformed parts, e.g. inserts comprising reinforcements only, e.g. self-reinforcing plastics
    • B29C70/06—Fibrous reinforcements only
    • B29C70/08—Fibrous reinforcements only comprising combinations of different forms of fibrous reinforcements incorporated in matrix material, forming one or more layers, and with or without non-reinforced layers

Similar Documents

Publication Publication Date Title
Chen et al. Flexural performance and cost efficiency of carbon/basalt/glass hybrid FRP composite laminates
Kazemi et al. Mechanical properties and failure modes of hybrid fiber reinforced polymer composites with a novel liquid thermoplastic resin, Elium®
Sun et al. Energy-absorption enhancement in carbon-fiber aluminum-foam sandwich structures from short aramid-fiber interfacial reinforcement
Shahzad Investigation into fatigue strength of natural/synthetic fiber-based composite materials
Park et al. Strength of carbon/epoxy composite single-lap bonded joints in various environmental conditions
Chang et al. Properties and failure mechanisms of pinned composite lap joints in monotonic and cyclic tension
Karakuzu et al. Effects of geometric parameters on failure behavior in laminated composite plates with two parallel pin-loaded holes
White et al. Delamination toughness of fiber-reinforced composites containing a carbon nanotube/polyamide-12 epoxy thin film interlayer
Ko et al. Fatigue characteristics of jagged pin-reinforced composite single-lap joints in hygrothermal environments
Onal et al. Effect of stacking sequence on the mechanical properties of glass–carbon hybrid composites before and after impact
Seghini et al. Fatigue behaviour of flax-basalt/epoxy hybrid composites in comparison with non-hybrid composites
Růžek et al. Effect of fatigue loading rate on lifespan and temperature of tailored blank C/PPS thermoplastic composite
Mouritz et al. Tension fatigue of fibre-dominated and matrix-dominated laminates reinforced with z-pins
Shao et al. Effect of matrix properties on the fatigue damage initiation and its growth in plain woven carbon fabric vinylester composites
Sharma et al. Mechanical behavior and fracture toughness characterization of high strength fiber reinforced polymer textile composites
Li et al. Pin-loaded tensile behavior and failure analysis of CF/PEKK composites under extreme temperature
Kumar et al. Pin hole tensile and fatigue properties of self-reinforced PET composites
Li et al. Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites
Liu et al. The compressive responses of glass fiber composite pyramidal truss cores sandwich panel at different temperatures
Hoffmann et al. Pull-out performance of rectangular z-pins in hot-cured carbon fiber reinforced laminates
Khashaba et al. Behavior of notched and unnotched [0/±30/±60/90] s GFR/EPOXY composites under static and fatigue loads
Ravindran et al. Design considerations in the strengthening of composite lap joints using metal z-pins
Sapi et al. Novel filler materials for composite out-of-plane joints
Liu et al. High temperature indentation behaviors of carbon fiber composite pyramidal truss structures
Liu et al. An improved model of fatigue life for stitched carbon fiber composites considering stiffness degradation