[go: up one dir, main page]
More Web Proxy on the site http://driver.im/

Jiang et al., 2021 - Google Patents

Structure bolt tightening force and loosening monitoring by conductive MXene/FPC pressure sensor with high sensitivity and wide sensing range

Jiang et al., 2021

Document ID
5032066171419146653
Author
Jiang X
Ma K
Lu S
Zhang L
Wang Z
Guo Y
Wang X
Zhao Z
Qu X
Lu Y
Publication year
Publication venue
Sensors and Actuators A: Physical

External Links

Snippet

Mxenes can be used in a variety of applications due to their multifunctional chemical properties. It has received increasing attention as a piezoresistive sensor. However, the stability and pressure monitoring range of the reported MXene sensors are limited, thereby …
Continue reading at www.sciencedirect.com (other versions)

Classifications

    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/02—Details not specific for a particular testing method
    • G01N2203/022—Environment of the test
    • G01N2203/0222—Temperature
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01L—MEASURING FORCE, STRESS, TORQUE, WORK, MECHANICAL POWER, MECHANICAL EFFICIENCY, OR FLUID PRESSURE
    • G01L1/00—Measuring force or stress in general
    • G01L1/24—Measuring force or stress in general by measuring variations of optical properties of material when it is stressed, e.g. by photoelastic stress analysis using infra-red, visible light, ultra-violet
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01L—MEASURING FORCE, STRESS, TORQUE, WORK, MECHANICAL POWER, MECHANICAL EFFICIENCY, OR FLUID PRESSURE
    • G01L1/00—Measuring force or stress in general
    • G01L1/005—Measuring force or stress in general by electrical means and not provided for in G01L1/06 - G01L1/22

Similar Documents

Publication Publication Date Title
Jiang et al. Structure bolt tightening force and loosening monitoring by conductive MXene/FPC pressure sensor with high sensitivity and wide sensing range
Tuloup et al. On the use of in-situ piezoelectric sensors for the manufacturing and structural health monitoring of polymer-matrix composites: A literature review
Rocha et al. Sensors for process and structural health monitoring of aerospace composites: A review
Yuan et al. Piezoelectric PAN/BaTiO3 nanofiber membranes sensor for structural health monitoring of real-time damage detection in composite
Wang et al. A piezoelectric active sensing method for quantitative monitoring of bolt loosening using energy dissipation caused by tangential damping based on the fractal contact theory
Materazzi et al. Carbon nanotube cement-based transducers for dynamic sensing of strain
Liu et al. Concrete damage diagnosis using electromechanical impedance technique
Thostenson et al. Carbon nanotube-based health monitoring of mechanically fastened composite joints
Chaudhry et al. Local-area health monitoring of aircraft via piezoelectric actuator/sensor patches
Wang et al. High-sensitive flexural sensors for health monitoring of composite materials using embedded carbon nanotube (CNT) buckypaper
Chen et al. Preload measurement of steel-to-timber bolted joint using piezoceramic-based electromechanical impedance method
Na et al. Steel wire electromechanical impedance method using a piezoelectric material for composite structures with complex surfaces
Boztepe et al. Novel carbon nanotube interlaminar film sensors for carbon fiber composites under uniaxial fatigue loading
Liang et al. Load monitoring of pin-connected structures using piezoelectric impedance measurement
Sánchez-Romate et al. Fatigue crack growth identification in bonded joints by using carbon nanotube doped adhesive films
Li et al. Load monitoring of the pin-connected structure based on wavelet packet analysis using piezoceramic transducers
Rubio-González et al. Damage progression monitoring using self-sensing capability and acoustic emission on glass fiber/epoxy composites and damage classification through principal component analysis
Groo et al. Fatigue damage tracking and life prediction of fiberglass composites using a laser induced graphene interlayer
Laflamme et al. Back-to-basics: Self-sensing materials for nondestructive evaluation
Haq et al. Piezo-impedance based fatigue damage monitoring of restrengthened concrete frames
Wang et al. An embedded non-intrusive graphene/epoxy broadband nanocomposite sensor co-cured with GFRP for in situ structural health monitoring
Gino et al. On the design of a piezoelectric self-sensing smart composite laminate
Qiu et al. Electroluminescent strain sensing on carbon fiber reinforced polymer
Zhang et al. Mechanical behavior monitoring of composite hybrid bonded‐riveted joints using high‐stability MXene sensors
Song et al. On-site monitoring of composite bolted joints looseness using CB/PVP nanocomposite piezoresistive sensor