[go: up one dir, main page]
More Web Proxy on the site http://driver.im/

Venca et al., 2016 - Google Patents

27.8 A 0.076 mm2 12b 26.5 mW 600MS/s 4×-interleaved subranging SAR-ΔΣ ADC with on-chip buffer in 28nm CMOS

Venca et al., 2016

Document ID
4068774271116278178
Author
Venca A
Ghittori N
Bosi A
Nani C
Publication year
Publication venue
2016 IEEE International Solid-State Circuits Conference (ISSCC)

External Links

Snippet

Integration of low-power and area-efficient ADCs is a key differentiator in modern mixed- signal SoCs. In scaled technologies, power challenges have been addressed using SAR architectures, often in combination with techniques like redundancy, asynchronous …
Continue reading at ieeexplore.ieee.org (other versions)

Classifications

    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/38—Analogue value compared with reference values sequentially only, e.g. successive approximation type
    • H03M1/46—Analogue value compared with reference values sequentially only, e.g. successive approximation type with digital/analogue converter for supplying reference values to converter
    • H03M1/466—Analogue value compared with reference values sequentially only, e.g. successive approximation type with digital/analogue converter for supplying reference values to converter using switched capacitors
    • H03M1/468—Analogue value compared with reference values sequentially only, e.g. successive approximation type with digital/analogue converter for supplying reference values to converter using switched capacitors in which the input S/H circuit is merged with the feedback DAC array
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/36—Analogue value compared with reference values simultaneously only, i.e. parallel type
    • H03M1/361—Analogue value compared with reference values simultaneously only, i.e. parallel type having a separate comparator and reference value for each quantisation level, i.e. full flash converter type
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/38—Analogue value compared with reference values sequentially only, e.g. successive approximation type
    • H03M1/44—Sequential comparisons in series-connected stages with change in value of analogue signal
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0675—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy
    • H03M1/0678—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components
    • H03M1/068—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components the original and additional components or elements being complementary to each other, e.g. CMOS
    • H03M1/0682—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence using redundancy using additional components or elements, e.g. dummy components the original and additional components or elements being complementary to each other, e.g. CMOS using a differential network structure, i.e. symmetrical with respect to ground
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/34—Analogue value compared with reference values
    • H03M1/38—Analogue value compared with reference values sequentially only, e.g. successive approximation type
    • H03M1/40—Analogue value compared with reference values sequentially only, e.g. successive approximation type recirculation type
    • H03M1/403—Analogue value compared with reference values sequentially only, e.g. successive approximation type recirculation type using switched capacitors
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/14—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit
    • H03M1/145—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit the steps being performed sequentially in series-connected stages
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0617—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence
    • H03M1/0634—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by averaging out the errors, e.g. using sliding scale
    • H03M1/0656—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by averaging out the errors, e.g. using sliding scale in the time domain
    • H03M1/066—Continuously compensating for, or preventing, undesired influence of physical parameters characterised by the use of methods or means not specific to a particular type of detrimental influence by averaging out the errors, e.g. using sliding scale in the time domain by continuously permuting the elements used, i.e. dynamic element matching
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/14—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit
    • H03M1/16—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit with scale factor modification, i.e. by changing the amplification between the steps
    • H03M1/164—Conversion in steps with each step involving the same or a different conversion means and delivering more than one bit with scale factor modification, i.e. by changing the amplification between the steps the steps being performed sequentially in series-connected stages
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/1205—Multiplexed conversion systems
    • H03M1/121—Interleaved, i.e. using multiple converters or converter parts for one channel
    • H03M1/1215—Interleaved, i.e. using multiple converters or converter parts for one channel using time-division multiplexing
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/12—Analogue/digital converters
    • H03M1/124—Sampling or signal conditioning arrangements specially adapted for A/D converters
    • H03M1/1245—Details of sampling arrangements or methods
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M3/00—Conversion of analogue values to or from differential modulation
    • H03M3/30—Delta-sigma modulation
    • H03M3/39—Structural details of delta-sigma modulators, e.g. incremental delta-sigma modulators
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0602—Continuously compensating for, or preventing, undesired influence of physical parameters of deviations from the desired transfer characteristic
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/66—Digital/analogue converters
    • H03M1/74—Simultaneous conversion
    • H03M1/80—Simultaneous conversion using weighted impedances
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/06—Continuously compensating for, or preventing, undesired influence of physical parameters
    • H03M1/0614—Continuously compensating for, or preventing, undesired influence of physical parameters of harmonic distortion
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/10—Calibration or testing
    • H03M1/1009—Calibration
    • H03M1/1033—Calibration over the full range of the converter, e.g. for correcting differential non-linearity
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/004—Reconfigurable analogue/digital or digital/analogue converters
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/10—Calibration or testing
    • H03M1/1071—Measuring or testing
    • H—ELECTRICITY
    • H03—BASIC ELECTRONIC CIRCUITRY
    • H03M—CODING; DECODING; CODE CONVERSION IN GENERAL
    • H03M1/00—Analogue/digital conversion; Digital/analogue conversion
    • H03M1/10—Calibration or testing
    • H03M1/1004—Calibration or testing without interrupting normal operation, e.g. by providing an additional component for temporarily replacing components to be tested or calibrated

Similar Documents

Publication Publication Date Title
US9954549B2 (en) Charge-sharing and charge-redistribution DAC and method for successive approximation analog-to-digital converters
Kapusta et al. A 14b 80 ms/s sar adc with 73.6 db sndr in 65 nm cmos
Zhou et al. A 12 bit 160 MS/s two-step SAR ADC with background bit-weight calibration using a time-domain proximity detector
Yoshioka et al. A 10-b 50-MS/s 820-$\mu $ W SAR ADC with on-chip digital calibration
Liu et al. A 12 bit 100 MS/s SAR-assisted digital-slope ADC
Liu et al. A 12b 22.5/45MS/s 3.0 mW 0.059 mm 2 CMOS SAR ADC achieving over 90dB SFDR
KR101512098B1 (en) SAR ADC using C-R hybrid DAC
Cho et al. A 9-bit 80 MS/s successive approximation register analog-to-digital converter with a capacitor reduction technique
Shen et al. A 6-bit 800-MS/s pipelined A/D converter with open-loop amplifiers
Krämer et al. A 14-bit 30-MS/s 38-mW SAR ADC using noise filter gear shifting
Kaur et al. A 12-bit, 2.5-bit/phase column-parallel cyclic ADC
Chio et al. Design and experimental verification of a power effective flash-SAR subranging ADC
Bonfini et al. An ultralow-power switched opamp-based 10-B integrated ADC for implantable biomedical applications
Kung et al. A low energy consumption 10-bit 100kS/s SAR ADC with timing control adaptive window
Venca et al. 27.8 A 0.076 mm2 12b 26.5 mW 600MS/s 4×-interleaved subranging SAR-ΔΣ ADC with on-chip buffer in 28nm CMOS
Balasubramaniam et al. 12-bit hybrid C2C DAC based SAR ADC with floating voltage shield
Qiao et al. A 10-bit 50-MS/s reference-free low power SAR ADC in 0.18-μm SOI CMOS technology
Zhong et al. A 12b 180MS/s 0.068 mm 2 pipelined-SAR ADC with merged-residue DAC for noise reduction
Chen et al. A 10-b 500ms/s partially loop-unrolled sar adc with a comparator offset calibration technique
Gu et al. An 11-bit 22-MS/s 0.6 mW SAR ADC with parasitic capacitance compensation
Tsukamoto et al. High power efficient and scalable noise-shaping SAR ADC for IoT sensors
Jiang et al. A 7b 2 GS/s time-interleaved SAR ADC with time skew calibration based on current integrating sampler
Wang et al. A 12-b 100MS/s low-power successive approximation register ADC in 65nm COMS
Fang et al. A $130\mu\mathrm {W} $ Three-Step DT Incremental $\displaystyle\Delta\sum $ ADC Achieving 107.6 dB DR and 99.3 dB SNDR with Zoom and Extended-Range Counting
Yu et al. A 1 V 186-μW 50-MS/s 10-bit subrange SAR ADC in 130-nm CMOS process