Abstract
To design efficient flapping wing micro air vehicles (FWMAVs), a comprehensive sizing method based on theoretical and statistical analyses is proposed and experimentally verified. This method is composed of five steps including defining and analyzing the MAV mission, determining the flying modes, defining the wing shape and aspect ratio of the wing, applying the constraint analysis based on the defined mission, and estimating the weights of the electrical and structural components of the bio-inspired flapping wing micro air vehicle. To define the vehicle mission and flight plan, path analysis is performed based on the defined mission, the speed of cruise and turning, the turning radius and climatic conditions in the flight area. Following the defined mission analysis, the appropriate modes of flying (i.e., flapping, gliding, hovering, bounding, and soaring) for the flapping wing bird are recognized. After that, the wing shape and the wing aspect ratio are determined based on the defined flight modes. To estimate the wing loading, a constraint analysis is exploited in which flight equitation is simulated based on the modes and missions of the flight. Along with the four listed steps, a statistical method is employed to estimate the FWMAV weight for a well-defined mission. Based on the offered method for wing sizing of flapping wings, a FWMAV named Thunder I has been designed, fabricated, and tested. This developed methodology is very beneficial by giving guidelines for the design of efficient bio-inspired FWMAVs.
Similar content being viewed by others
References
Fenelon, M.A.A., Furukawa, T.: Design of an active flapping wing mechanism and a micro aerial vehicle using a rotary actuator. Mech. Mach. Theory 45, 137–146 (2010)
Abdelkefi, A., Ghommem, M.: Piezoelectric energy harvesting from morphing wing motions for micro air vehicles. Theor. Appl. Mech. Lett. 3, 052004 (2013)
Klingebiel, K. R.: Computational Aerodynamics of Flapping Flight Using an Indicial Response Method. M.Sc. Dissertation, Aerospace Engineering Department, Pennsylvania State University (2006)
Hassanalian, M., Khaki, H., Khosrawi, M.: A new method for design of fixed wing micro air vehicle. Proc. Inst. Mech. Eng. J. Aerosp. Eng. 229, 837–850 (2014)
Hassanalian, M., Abdelkefi, A.: Design, manufacturing, and flight testing of a fixed wing micro air vehicle with Zimmerman planform. Meccanica 51, 1–18 (2016)
Sibilski, K.: Dynamics of micro-air vehicle with flapping wings. Acta Polytech. 44, 15–21 (2004)
Michelson, R.C.: Overview of micro air vehicle system design and integration issues. In: Encyclopedia of Aerospace Engineering. Georgia Institute of Technology, Atlanta (2010). doi:10.1002/9780470686652.eae401
Sladek, N.J.: Flapping Wing Micro Air Vehicle Wing Manufacture and Force Testing. Wright-Patterson Air Force Base, Dayton (2012)
Pfeiffer, A.T., Lee, J.S., Han, J.H., Baier, H.: Ornithopter flight simulation based on flexible multi-body dynamics. J. Bionic Eng. 7, 102–111 (2010)
Whitney, J.P., Wood, R.J.: Conceptual design of flapping-wing micro air vehicles. Bioinspir. Biomim. 7, 036001 (2012)
Nguyen, Q.V., Park, H.C., Goo, N.S., Byun, D.: Characteristics of a beetle’s free flight and a flapping-wing system that mimics beetle flight. J. Bionic Eng. 7, 77–86 (2010)
DeLaurier, J.D.: An aerodynamic model for flapping-wing flight. Aeronaut. J. 97, 125–130 (1993)
Orlowski, C.T., Girard, A.R.: Dynamics, stability, and control analyses of flapping wing micro-air vehicles. Prog. Aerosp. Sci. 51, 18–30 (2012)
Anderson, M.L., Sladek, N.J., Cobb, R.G.: Design, fabrication, and testing of an insect-sized MAV wing flapping mechanism. In: 49th AIAA Aerospace Sciences Meeting, Orlando, FL, USA (2011)
Greenewalt, C.H.: Dimensional relationships for flying animals. In: Smithsonian Miscellaneous Collections, vol. 144, pp. 1–46. Smithsonian Institution, Washington (1962)
Pennycuick, C.J.: Mechanics of flight. Avian Biol. 5, 1–75 (1975)
Pennycuick, C.J.: Towards an optimal strategy for bird flight research. J. Avian Biol. 29, 449–457 (1998)
Rayner, J.M.: A vortex theory of animal flight, part 2: the forward flight of birds. J. Fluid Mech. 91, 731–763 (1978)
Norberg, U.M., Rayner, J.M.V.: Ecological morphology and flight in bats. Philos. Trans. R. Soc. Lond. Ser. B Biol. Sci. 316, 335–427 (1987)
Tucker, V.A.: Gliding birds: reduction of induced drag by wing tip slots between the primary feathers. J. Exp. Biol. 180, 285–310 (1993)
Tucker, V.A., Parrott, G.C.: Aerodynamics of gliding flight in a falcon and other birds. J. Exp. Biol. 52, 345–367 (1970)
Lighthill, J.: Some challenging new applications for basic mathematical methods in the mechanics of fluids that were originally pursued with aeronautical aims. Aeronaut. J. 94, 41–52 (1990)
Lighthill, J.: Aerodynamic aspects of animal flight. In: Wu, T.Y.-T., Brokaw, C.J., Brennen, C. (eds.) Swimming and Flying in Nature, vol. 2, pp. 423–491. Springer, New York (1975)
Spedding, G.R.: The wake of a kestrel in flapping flight. J. Exp. Biol. 127, 59–78 (1987)
Beng, T.W.: Dynamics and Control of a Flapping Wing Aircraft. M.Sc. dissertation, Mechanical Engineering Department, National University of Singapore (2003)
Beasley, B.: A Study of Planar and Nonplanar Membrane Wing Planforms for the Design of a Flapping Wing Micro Air Vehicle. M.Sc. dissertation, Aerospace Engineering Department, University of Maryland, College Park (2006)
Norberg, U.M.: Vertebrate Flight: Mechanics, Physiology, Morphology, Ecology and Evolution, vol. 27. Springer, New York (2012)
Gerrard, C., Ward, M.: Final Year Honours Project Micro Air Vehicle. The University of Adelaide, Adelaide (2007)
Pennycuick, C.J.: Modelling the flying bird. In: Theoretical ecology series, vol. 5. Elsevier, Amsterdam (2008)
Simpson, D.G.: Physics Recreations: Helmert’s Equation. Prince George’s Community College, Department of Largo (2009)
Lentink, D., Biewener, A.A.: Nature-inspired flight: beyond the leap. Bioinspir. Biomim. 5, 247–269 (2010)
Guerrero, J.: Numerical Simulation of the Unsteady Aerodynamics of Flapping Flight. PhD. dissertation, Department of Civil, Environmental and Architectural Engineering, University of Genoa, Genova, Italy (2009)
Nam, T.: A Generalized Sizing Method for Revolutionary Concepts Under Probabilistic Design Constraints. PhD. Dissertation, Georgia Institute of Technology (2007)
Roskam, J.: Airplane Design: Determination of stability, control and performance characteristics: FAR and military requirements. DAR corporation (1985)
Harmon, R.L.: Aerodynamic Modeling of a Flapping Membrane Wing Using Motion Tracking Experiments. M.Sc. dissertation, Department of Aerospace Engineering, University of Maryland, College Park (2008)
Hedenstrom, A., Liechti, F.: Field estimates of body drag coefficient on the basis of dives in passerine birds. J. Exp. Biol. 204, 1167–1175 (2001)
Mueller, T.J., Kellogg, J.C., Ifju, P.G., Shkarayev, S.V.: Introduction to the Design of Fixed-Wing Micro Air Vehicles Including Three Case Studies. AIAA, Reston (2007)
Hassanalian, M., Abdelkefi, A.: Methodologies for weight estimation of fixed and flapping wing micro air vehicles. Meccanica. (2016). doi:10.1007/s11012-016-0568-y
Silin, D.: Aerodynamics and Flight Performance of Flapping Wing Micro Air Vehicles. Ph.D. Dissertation, Aerospace Engineering Department, University of Arizona, Tucson, AZ, USA (2010)
Pennycuick, C.J.: Wing beat frequency of birds in steady cruising flight: new data and improved predictions. J. Exp. Biol. 199, 1613–1618 (1996)
Zakaria, M.Y., Bayoumy, A.M., Elshabka, A.M., AbdElhamid, O.E.: Experimental aerodynamic characteristics of flapping membrane wings. In: 13th International Conference on Aerospace Sciences & Aviation Technology, Cairo, Egypt (2009)
Mazaheri, K., Ebrahimi, A.: Experimental investigation of the effect of chordwise flexibility on the aerodynamics of flapping wings in hovering flight. J. Fluids Struct. 26, 544–558 (2010)
Park, J.H., Yoon, K.J.: Designing a biomimetic ornithopter capable of sustained and controlled flight. J. Bionic Eng. 5, 39–47 (2008)
Berg, C., Rayner, J.: The moment of inertia of bird wings and the inertial power requirement for flapping flight. J. Exp. Biol. 198, 1655–1664 (1995)
Alford, L.D.: Aerodynamic Analysis of Natural Flapping Flight Using a Lift Model Based on Spanwise Flow. PhD. Dissertation, Aerospace Engineering Department, University of Dayton, Dayton, OH, USA (2010)
Alexander, D.E.: Nature’s Flyers: Birds, Insects, and the Biomechanics of Flight. The Johns Hopkins University Press, Baltimore (2002)
Hedrick, T.L., Biewener, A.A.: Experimental study of low speed turning flight in cockatoos and cockatiels. In: 45th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, USA (2007)
Lee, B.J., Padulo, M., Liou, M.S.: Non-sinusoidal trajectory optimization of flapping airfoil using unsteady adjoint approach. In: 49th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, FL, USA (2011)
Hassanalian, M., Abdelkefi, A.: Effective design of flapping wing actuation mechanisms: theory and experiments. AIAA Science and Technology Forum and Exposition, San Diego, California 4–8, (January 2016)
Yu, C., Kim, D., Zhao, Y.: Lift and thrust characteristics of flapping wing aerial vehicle with pitching and flapping motion. J. Appl. Math. Phys. 2, 1031–1038 (2014)
Nudds, R.L., Taylor, G.K., Thomas, A.R.: Tuning of Strouhal number for high propulsive efficiency accurately predicts how wingbeat frequency and stroke amplitude relate and scale with size and flight speed in birds. Proc. R. Soc. Lond. Biol. Sci. 271, 2071–2076 (2004)
Taylor, G.K., Nudds, R.L., Thomas, A.R.: Flying and swimming animals cruise at a Strouhal number tuned for high power efficiency. Lett. Nat. 425, 707–711 (2003)
Final Report of Task Group AVT-149: Unsteady Aerodynamics for Micro Air Vehicles. TR-AVT-149 (2010)
Nakata, T., Liu, H., Tanaka, Y., Nishihashi, N., Wang, X., Sato, A.: Aerodynamics of a bio-inspired flexible flapping-wing micro air vehicle. Bioinspir. Biomim. 6, 045002 (2011)
Yang, Y., Li, L.: Influence of flapping wing unsteady motion on aerodynamic performance of horizontal tail. In: 28th International Congress of the Aeronautical Sciences, Brisbane, Australia (2012)
Masoud, H., Alexeev, A.: Resonance of flexible flapping wings at low Reynolds number. Phys. Rev. 81, 056304 (2010)
Liebe, R.: Flow phenomena in nature: a challenge to engineering design. vol. 1. WIT Press (2007)
Gillis, B., Kozak, J., Baker, J., Hein, D., Lemieux, A., Fu, T.C., Hess, J.E.D., Phadnis, A., Grilly, A., Le, C., Schoennagel, V.: RIT Micro Air Vehicle Preliminary Design Report. Rochester Institute of Technology, New York (2005)
Greenewalt, C.H.: Dimensional Relationships for Flying Animals. Smithsonian Miscellaneous Collection, Washington, DC (1962)
Ho, S., Nassef, H., Pornsinsirirak, N., Tai, Y.C., Ho, C.M.: Unsteady aerodynamics and flow control for flapping wing flyers. Prog. Aerosp. Sci. 39, 635–681 (2003)
Parslew, B.: Simulating Avian Wingbeats and Wakes. PhD. Dissertation, Department of Mechanical, Aerospace and Civil Engineering, University of Manchester, Manchester, UK (2012)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hassanalian, M., Abdelkefi, A., Wei, M. et al. A novel methodology for wing sizing of bio-inspired flapping wing micro air vehicles: theory and prototype. Acta Mech 228, 1097–1113 (2017). https://doi.org/10.1007/s00707-016-1757-4
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-016-1757-4