Based on: fergbrain/omvsensors (https://github.com/fergbrain/omvsensors) I just have applied some changes to make it works with OMV 2.x
OMV-script for easy setup of sensors (CPU Temperature, Fanspeed, and HDD Temperature)
Small installation step guide:
May be you need to remove some older version files
rm /var/www/openmediavault/js/omv/module/admin/diagnostic/system/plugin/Sensors.default
rm /var/www/openmediavault/js/omv/module/admin/diagnostic/system/plugin/Sensors.js
**Note: Do the following as root or sudo the commands:
-
Install lm-sensors in OpenMediaVault:
apt-get install lm-sensors -
Install hddtemp in OMV:
apt-get install hddtemp -
Detect your sensors in lm-sensors:
sensors-detect
Answer "yes" at the question: if the sensors should be added automatically
I answered yes to everything.
**WATCH! At the end it ask you to change some files and reload, I should accept and exec the command.
- Check that your CPU temp sensors are working:
sensors
You should get something like:
~$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +58.5°C (high = +70.0°C, crit = +100.0°C)
Or something like this:
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +34.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +35.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +31.0°C (high = +80.0°C, crit = +100.0°C)
nct6776-isa-0290
Adapter: ISA adapter
Vcore: +0.86 V (min = +0.00 V, max = +1.74 V)
in1: +0.18 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.38 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.36 V (min = +2.98 V, max = +3.63 V)
in4: +0.50 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +1.82 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +1.70 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.44 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.33 V (min = +2.70 V, max = +3.63 V)
fan1: 979 RPM (min = 0 RPM)
fan2: 1345 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
SYSTIN: +31.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
CPUTIN: -58.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN: -14.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
PECI Agent 0: +34.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +100.0°C)
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
PCH_MCH_TEMP: +0.0°C
intrusion0: OK
intrusion1: OK
beep_enable: enabled
- Download it:
wget https://github.com/zalito12/omvsensors/archive/master.zip - Unpack it:
unzip master.zip(Perhaps you have to install: apt-get install unzip) - Install it:
cd omvsensors-master
./install-remove.sh
The script will lead you through the installation (and if removal) process.
Edit '/etc/omv-sensor.conf' to fit your needs. Be careful choosing your temp files. In my case I have 3 core temp files, physical, core0, core1 and the core1 file is temp3 rrd.
Then run:
/usr/share/openmediavault/mkconf/collectd.d/sensors
...to create the rrd-scripts for OMV.
After that, please run:
/etc/init.d/collectd restart
...to collect the values for your coretemp/hddtemp/fanspeed.
You can run:
omv-mkgraph
...to create the graphs.
Don't forget to run:
/usr/share/openmediavault/scripts/collectd.d/sensors
omv-mkgraph
...each time after changing the configuration file to make your changes happen in OMV
May be you have to run
rm -f /var/cache/openmediavault/cache.*.json
to see the new tabs.
Now you should see A new Tab under Diagnostic > System info