Shrike is world's first fully open source FPGA Dev board based on Renesas Forge FPGA SLG47910 and RP2040.
We at vicharak have kept in mind need of a learner, maker and a hobbist while designing this art. This dev board will be your stepping stone in the field of FPGA , reconfigurable and heterogenous computing .
- RP2040 ARM Cortex M0
- FPGA with 1100 Luts
- PMOD Compatible Connector
- Bread Board compatible Io's from both FPGA and MCU
- High Speed IO interface Between FPGA and MCU
- QSPI Flash
- 2x User LED's
- Type C Port for Power and Programming
-
FPGA Datasheet - Renesas Forge FPGA
-
EDA Tool - Go Configure Software Hub
-
RP2040 Related Resources- Getting Started
We are building a ecosystem for learners makers and hobbist around shrike and the projects that will follow in the future thus we request you contribution in the same. Join our communities across all the platforms ,pitch and showcase your ideas with Shrike.
Thank You
- Peripheral Coprocessor
- ROS Node using Micro ROS
- Protocol converter (USB to uart , Uart-SPI, SPI-I2C etc)
- LED Water
- Servo Controller
- I2C to Uart
- UART to 7 seg
- RISC V SERV
- LCD Display 16*2
- Periplex (port)
- 4 bit 7 segment Controller
- SPI Display Driver
- 8 Bit protocol for v2
- FFT
- PWM Coprocessor ( servo and motor controls)
- Signal Generator ( Pll for higher frequencies)
- Random number generator
- Counter 4 bit -- DONE
| FPGA PIN | RP 2040 PIN | S_Fun RP2040 | S_Fun FPGA |
|---|---|---|---|
| 0 | 13 | GPIO UART0-RX /SCL | GPIO |
| 1 | 12 | GPIO UART0-TX /SDA | GPIO |
| 3 | 2 | GPIO | SPI_SCLK |
| 4 | 1 | UART RX / GPIO | SPI_SS |
| 5 | 3 | GPIO | SPI_SI (MOSI) |
| 6 | 0 | UART TX / GPIO | SPI_SO (MISO) / CONFIG |