Mu: a human-scale computer

Mu is a minimal-dependency hobbyist computing stack (everything above the processor and OS kernel).

Mu is not designed to operate in large clusters providing services for millions of people. Mu is designed for you, to run one computer. (Or a few.) Running the code you want to run, and nothing else.

$ git clone https://github.com/akkartik/mu
$ cd mu
$ ./subx

Goals

In priority order:

Reward curiosity.
- Easy to build, easy to run. Minimal dependencies, so that installation is always painless.
- All design decisions comprehensible to a single individual. (On demand.)
- All design decisions comprehensible without needing to talk to anyone. (I always love talking to you, but I try hard to make myself redundant.)
- A globally comprehensible codebase rather than locally clean code.
- Clear error messages over expressive syntax.
Safe.
- Thorough test coverage. If you break something you should immediately see an error message. If you can manually test for something you should be able to write an automated test for it.
- Memory leaks over memory corruption.
Teach the computer bottom-up.

Non-goals

Efficiency. Clear programs over fast programs.
Portability. Runs on any computer as long as it's x86.
Compatibility. The goal is to get off mainstream stacks, not to perpetuate them. Sometimes the right long-term solution is to bump the major version number.
Syntax. Mu code is meant to be comprehended by running, not just reading. For now it's a thin veneer over machine code. I'm working on memory safety before expressive syntax.

What works so far

You get a thin syntax called SubX for programming in (a subset of) x86 machine code. (A memory-safe compiled language is being designed.) Here's a program (examples/ex1.subx) that returns 42:

bb/copy-to-ebx  0x2a/imm32  # 42 in hex
b8/copy-to-eax  1/imm32/exit
cd/syscall  0x80/imm8

You can generate tiny zero-dependency ELF binaries with it that run on Linux.

$ ./subx translate init.linux examples/ex1.subx -o examples/ex1  # on Linux or BSD or Mac
$ ./examples/ex1  # only on Linux
$ echo $?
42

(Running subx requires a C++ compiler, transparently invoking it as necessary.)

You can run the generated binaries on an interpreter/VM for better error messages.

$ ./subx run examples/ex1  # on Linux or BSD or Mac
$ echo $?
42

Emulated runs can generate a trace that permits time-travel debugging.

$ ./subx --debug translate init.linux examples/factorial.subx -o examples/factorial
saving address->label information to 'labels'
saving address->source information to 'source_lines'

$ ./subx --debug --trace run examples/factorial
saving trace to 'last_run'

$ ./browse_trace/browse_trace last_run  # text-mode debugger UI

You can write tests for your programs. The entire stack is thoroughly covered by automated tests. SubX's tagline: tests before syntax.

$ ./subx test
$ ./subx run apps/factorial test

You can use SubX to translate itself. For example, running natively on Linux:

# generate translator phases using the C++ translator
$ ./subx translate init.linux 0*.subx apps/subx-params.subx apps/hex.subx    -o hex
$ ./subx translate init.linux 0*.subx apps/subx-params.subx apps/survey.subx -o survey
$ ./subx translate init.linux 0*.subx apps/subx-params.subx apps/pack.subx   -o pack
$ ./subx translate init.linux 0*.subx apps/subx-params.subx apps/assort.subx -o assort
$ ./subx translate init.linux 0*.subx apps/subx-params.subx apps/dquotes.subx -o dquotes
$ ./subx translate init.linux 0*.subx apps/subx-params.subx apps/tests.subx  -o tests
$ chmod +x hex survey pack assort dquotes tests

# use the generated translator phases to translate SubX programs
$ cat init.linux examples/ex1.subx |./tests |./dquotes |./assort |./pack |./survey |./hex > a.elf
$ chmod +x a.elf
$ ./a.elf
$ echo $?
42

# or, automating the above steps
$ ./ntranslate init.linux ex1.subx
$ ./a.elf
$ echo $?
42

Or, running in a VM on other platforms:

$ ./translate init.linux ex1.subx  # generates identical a.elf to above
$ ./subx run a.elf
$ echo $?
42

You can package up SubX binaries with the minimal hobbyist OS Soso and run them on Qemu. (Requires graphics and sudo access. Currently doesn't work on a cloud server.)

# dependencies
$ sudo apt install util-linux nasm xorriso  # maybe also dosfstools and mtools
# package up a "hello world" program with a third-party kernel into mu_soso.iso
# requires sudo
$ ./gen_soso_iso init.soso examples/ex6.subx
# try it out
$ qemu-system-i386 -cdrom mu_soso.iso

You can also package up SubX binaries with a Linux kernel and run them on either Qemu or a cloud server that supports custom images. (Takes 12 minutes with 8GB RAM. Requires 12 million LoC of C for the Linux kernel; that number will gradually go down.)

$ sudo apt install build-essential flex bison wget libelf-dev libssl-dev xorriso
$ ./gen_linux_iso init.linux examples/ex6.subx
$ qemu-system-x86_64 -m 256M -cdrom mu.iso -boot d

What it looks like

Here is the above example again:

bb/copy-to-ebx  0x2a/imm32  # 42 in hex
b8/copy-to-eax  1/imm32/exit
cd/syscall  0x80/imm8

Every line contains at most one instruction. Instructions consist of words separated by whitespace. Words may be opcodes (defining the operation being performed) or arguments (specifying the data the operation acts on). Any word can have extra metadata attached to it after /. Some metadata is required (like the /imm32 and /imm8 above), but unrecognized metadata is silently skipped so you can attach comments to words (like the instruction name /copy-to-eax above, or the /exit operand).

SubX doesn't provide much syntax (there aren't even the usual mnemonics for opcodes), but it does provide error-checking. If you miss an operand or accidentally add an extra operand you'll get a nice error. SubX won't arbitrarily interpret bytes of data as instructions or vice versa.

So much for syntax. What do all these numbers actually mean? SubX supports a small subset of the 32-bit x86 instruction set that likely runs on your computer. (Think of the name as short for "sub-x86".) Instructions operate on a few registers:

Six general-purpose 32-bit registers: eax, ebx, ecx, edx, esi and edi
Two additional 32-bit registers: esp and ebp (I suggest you only use these to manage the call stack.)
Four 1-bit flag registers for conditional branching:
- zero/equal flag ZF
- sign flag SF
- overflow flag OF
- carry flag CF

SubX programs consist of instructions like 89/copy, 01/add, 3d/compare and 51/push-ecx which modify these registers as well as a byte-addressable memory. For a complete list of supported instructions, run subx help opcodes.

(SubX doesn't support floating-point registers yet. Intel processors support an 8-bit mode, 16-bit mode and 64-bit mode. SubX will never support them. There are other flags. SubX will never support them. There are also many more instructions that SubX will never support.)

It's worth distinguishing between an instruction's operands and its arguments. Arguments are provided directly in instructions. Operands are pieces of data in register or memory that are operated on by instructions. Intel processors determine operands from arguments in fairly complex ways.

Lengthy interlude: How x86 instructions compute operands

The Intel processor manual is the final source of truth on the x86 instruction set, but it can be forbidding to make sense of, so here's a quick orientation. You will need familiarity with binary numbers, and maybe a few other things. Email me any time if something isn't clear. I love explaining this stuff for as long as it takes. The bad news is that it takes some getting used to. The good news is that internalizing the next 500 words will give you a significantly deeper understanding of your computer.

Most instructions operate on an operand in register or memory ('reg/mem'), and a second operand in a register. The register operand is specified fairly directly using the 3-bit /r32 argument:

0 means register eax
1 means register ecx
2 means register edx
3 means register ebx
4 means register esp
5 means register ebp
6 means register esi
7 means register edi

The reg/mem operand, however, gets complex. It can be specified by 1-7 arguments, each ranging in size from 2 bits to 4 bytes.

The key argument that's always present for reg/mem operands is /mod, the addressing mode. This is a 2-bit argument that can take 4 possible values, and it determines what other arguments are required, and how to interpret them.

If /mod is 3: the operand is in the register described by the 3-bit /rm32 argument similarly to /r32 above.
If /mod is 0: the operand is in the address provided in the register described by /rm32. That's *rm32 in C syntax.
If /mod is 1: the operand is in the address provided by adding the register in /rm32 with the (1-byte) displacement. That's *(rm32 + /disp8) in C syntax.
If /mod is 2: the operand is in the address provided by adding the register in /rm32 with the (4-byte) displacement. That's *(/rm32 + /disp32) in C syntax.

In the last three cases, one exception occurs when the /rm32 argument contains 4. Rather than encoding register esp, it means the address is provided by three whole new arguments (/base, /index and /scale) in a totally different way (where << is the left-shift operator):

reg/mem = *(base + (index << scale))

(There are a couple more exceptions ☹; see Table 2-2 and Table 2-3 of the Intel manual for the complete story.)

Phew, that was a lot to take in. Some examples to work through as you reread and digest it:

To read directly from the eax register, /mod must be 3 (direct mode), and /rm32 must be 0. There must be no /base, /index or /scale arguments.
To read from *eax (in C syntax), /mod must be 0 (indirect mode), and the /rm32 argument must be 0. There must be no /base, /index or /scale arguments (Intel calls the trio the 'SIB byte'.).
To read from *(eax+4), /mod must be 1 (indirect + disp8 mode), /rm32 must be 0, there must be no SIB byte, and there must be a single displacement byte containing 4.
To read from *(eax+ecx+4), one approach would be to set /mod to 1 as above, /rm32 to 4 (SIB byte next), /base to 0, /index to 1 (ecx) and a single displacement byte to 4. (What should the scale bits be? Can you think of another approach?)
To read from *(eax+ecx+1000), one approach would be:
- /mod: 2 (indirect + disp32)
- /rm32: 4 (/base, /index and /scale arguments required)
- /base: 0 (eax)
- /index: 1 (ecx)
- /disp32: 4 bytes containing 1000

Putting it all together

Here's a more meaty example:

This program sums the first 10 natural numbers. By convention I use horizontal tabstops to help read instructions, dots to help follow the long lines, comments before groups of instructions to describe their high-level purpose, and comments at the end of complex instructions to state the low-level operation they perform. Numbers are always in hexadecimal (base 16) and must start with a digit ('0'..'9'); use the '0x' prefix when a number starts with a letter ('a'..'f'). I tend to also include it as a reminder when numbers look like decimal numbers.

Try running this example now:

$ ./subx translate init.linux examples/ex3.subx -o examples/ex3
$ ./subx run examples/ex3
$ echo $?
55

If you're on Linux you can also run it natively:

$ ./examples/ex3
$ echo $?
55

Use it now to follow along for a more complete tour of SubX syntax.

The syntax of SubX programs

SubX programs map to the same ELF binaries that a conventional Linux system uses. Linux ELF binaries consist of a series of segments. In particular, they distinguish between code and data. Correspondingly, SubX programs consist of a series of segments, each starting with a header line: == followed by a name and approximate starting address.

All code must lie in a segment called 'code'.

Segments can be added to.

== code 0x09000000  # first mention requires starting address
...A...

== data 
10000
0x0a000000
...B...

== code             # no address necessary when adding
...C...

The code segment now contains the instructions of A as well as C.

Within the code segment, each line contains a comment, label or instruction. Comments start with a # and are ignored. Labels should always be the first word on a line, and they end with a :.

Instruction arguments must specify their type, from:

/mod
/rm32
/r32
/subop (sometimes the /r32 bits in an instruction are used as an extra opcode)
displacement: /disp8 or /disp32
immediate: /imm8 or /imm32

Different instructions (opcodes) require different arguments. SubX will validate each instruction in your programs, and raise an error anytime you miss or spuriously add an argument.

I recommend you order arguments consistently in your programs. SubX allows arguments in any order, but only because that's simplest to explain/implement. Switching order from instruction to instruction is likely to add to the reader's burden. Here's the order I've been using after opcodes:

        |<--------- reg/mem --------->|        |<- reg/mem? ->|
/subop  /mod /rm32  /base /index /scale  /r32   /displacement   /immediate

Instructions can refer to labels in displacement or immediate arguments, and they'll obtain a value based on the address of the label: immediate arguments will contain the address directly, while displacement arguments will contain the difference between the address and the address of the current instruction. The latter is mostly useful for jump and call instructions.

Functions are defined using labels. By convention, labels internal to functions (that must only be jumped to) start with a $. Any other labels must only be called, never jumped to. All labels must be unique.

A special label is Entry, which can be used to specify/override the entry point of the program. It doesn't have to be unique, and the latest definition will override earlier ones.

(The Entry label, along with duplicate segment headers, allows programs to be built up incrementally out of multiple layers.)

The data segment consists of labels as before and byte values. Referring to data labels in either code segment instructions or data segment values yields their address.

Automatic tests are an important part of SubX, and there's a simple mechanism to provide a test harness: all functions that start with test- are called in turn by a special, auto-generated function called run-tests. How you choose to call it is up to you.

I try to keep things simple so that there's less work to do when I eventually implement SubX in SubX. But there is one convenience: instructions can provide a string literal surrounded by quotes (") in an imm32 argument. SubX will transparently copy it to the data segment and replace it with its address. Strings are the only place where a SubX word is allowed to contain spaces.

That should be enough information for writing SubX programs. The examples/ directory provides some fodder for practice, giving a more gradual introduction to SubX features. This repo includes the binary for all examples. At any commit, an example's binary should be identical bit for bit with the result of translating the corresponding .subx file. The binary should also be natively runnable on a Linux system running on Intel x86 processors, either 32- or 64-bit. If either of these invariants is broken it's a bug on my part.

Running

subx currently has the following sub-commands:

subx help: some helpful documentation to have at your fingertips.
subx test: runs all automated tests.
subx translate <input files> -o <output ELF binary>: translates .subx files into an executable ELF binary.
subx run <ELF binary>: simulates running the ELF binaries emitted by subx translate. Useful for debugging, and also enables more thorough testing of translate.

Remember, not all 32-bit Linux binaries are guaranteed to run. I'm not building general infrastructure here for all of the x86 instruction set. SubX is about programming with a small, regular subset of 32-bit x86.

A few hints for debugging

Writing programs in SubX is surprisingly pleasant and addictive. Reading programs is a work in progress, and hopefully the extensive unit tests help. However, debugging programs is where one really faces up to the low-level nature of SubX. Even the smallest modifications need testing to make sure they work. In my experience, there is no modification so small that I get it working on the first attempt. And when it doesn't work, there are no clear error messages. Machine code is too simple-minded for that. You can't use a debugger, since SubX's simplistic ELF binaries contain no debugging information. So debugging requires returning to basics and practicing with a new, more rudimentary but hopefully still workable toolkit:

Start by nailing down a concrete set of steps for reproducibly obtaining the error or erroneous behavior.
If possible, turn the steps into a failing test. It's not always possible, but SubX's primary goal is to keep improving the variety of tests one can write.
Start running the single failing test alone. This involves modifying the top of the program (or the final .subx file passed in to subx translate) by replacing the call to run-tests with a call to the appropriate test- function.
Generate a trace for the failing test while running your program in emulated mode (subx run):
```
$ ./subx translate input.subx -o binary
$ ./subx --trace run binary arg1 arg2  2>trace
```
The ability to generate a trace is the essential reason for the existence of subx run mode. It gives far better visibility into program internals than running natively.
As a further refinement, it is possible to render label names in the trace by adding a second flag to both the translate and run commands:
```
$ ./subx --debug translate input.subx -o binary
$ ./subx --debug --trace run binary arg1 arg2  2>trace
```
subx --debug translate emits a mapping from label to address in a file called labels. subx --debug --trace run reads in the labels file at the start and prints out any matching label name as it traces each instruction executed.

Here's a sample of what a trace looks like, with a few boxes highlighted:

Each of the green boxes shows the trace emitted for a single instruction. It starts with a line of the form run: inst: ___ followed by the opcode for the instruction, the state of registers before the instruction executes, and various other facts deduced during execution. Some instructions first print a matching label. In the above screenshot, the red boxes show that address 0x0900005e maps to label $loop and presumably marks the start of some loop. Function names get similar run: == label lines.
One trick when emitting traces with labels:
```
$ grep label trace
```
This is useful for quickly showing you the control flow for the run, and the function executing when the error occurred. I find it useful to start with this information, only looking at the complete trace after I've gotten oriented on the control flow. Did it get to the loop I just modified? How many times did it go through the loop?
Once you have SubX displaying labels in traces, it's a short step to modify the program to insert more labels just to gain more insight. For example, consider the following function:

This function contains a series of jump instructions. If a trace shows is-hex-lowercase-byte? being encountered, and then $is-hex-lowercase-byte?:end being encountered, it's still ambiguous what happened. Did we hit an early exit, or did we execute all the way through? To clarify this, add temporary labels after each jump:

Now the trace should have a lot more detail on which of these labels was reached, and precisely when the exit was taken.
If you find yourself wondering, "when did the contents of this memory address change?", subx run has some rudimentary support for watch points. Just insert a label starting with $watch- before an instruction that writes to the address, and its value will start getting dumped to the trace after every instruction thereafter.
Once we have a sense for precisely which instructions we want to look at, it's time to look at the trace as a whole. Key is the state of registers before each instruction. If a function is receiving bad arguments it becomes natural to inspect what values were pushed on the stack before calling it, tracing back further from there, and so on.

I occasionally want to see the precise state of the stack segment, in which case I uncomment a commented-out call to dump_stack() in the vm.cc layer. It makes the trace a lot more verbose and a lot less dense, necessitating a lot more scrolling around, so I keep it turned off most of the time.
If the trace seems overwhelming, try browsing it in the 'time-travel debugger'.

Hopefully these hints are enough to get you started. The main thing to remember is to not be afraid of modifying the sources. A good debugging session gets into a nice rhythm of generating a trace, staring at it for a while, modifying the sources, regenerating the trace, and so on. Email me if you'd like another pair of eyes to stare at a trace, or if you have questions or complaints.

Reference documentation on available primitives

Data Structures

Kernel strings: null-terminated arrays of bytes. Unsafe and to be avoided, but needed for interacting with the kernel.
Strings: length-prefixed arrays of bytes. String contents are preceded by 4 bytes (32 bytes) containing the length of the array.
Slices: a pair of 32-bit addresses denoting a half-open [start, end) interval to live memory with a consistent lifetime.

Invariant: start <= end
Streams: strings prefixed by 32-bit write and read indexes that the next write or read goes to, respectively.
- offset 0: write index
- offset 4: read index
- offset 8: length of array (in bytes)
- offset 12: start of array data
Invariant: 0 <= read <= write <= length
File descriptors (fd): Low-level 32-bit integers that the kernel uses to track files opened by the program.
File: 32-bit value containing either a fd or an address to a stream (fake file).
Buffered files (buffered-file): Contain a file descriptor and a stream for buffering reads/writes. Each buffered-file must exclusively perform either reads or writes.

'system calls'

As I said at the top, a primary design goal of SubX (and Mu more broadly) is to explore ways to turn arbitrary manual tests into reproducible automated tests. SubX aims for this goal by baking testable interfaces deep into the stack, at the OS syscall level. The idea is that every syscall that interacts with hardware (and so the environment) should be dependency injected so that it's possible to insert fake hardware in tests.

But those are big goals. Here are the syscalls I have so far:

write: takes two arguments, a file f and an address to array s.

Comparing this interface with the Unix write() syscall shows two benefits:
1. SubX can handle 'fake' file descriptors in tests.
2. write() accepts buffer and its length in separate arguments, which requires callers to manage the two separately and so can be error-prone. SubX's wrapper keeps the two together to increase the chances that we never accidentally go out of array bounds.
read: takes two arguments, a file f and an address to stream s. Reads as much data from f as can fit in (the free space of) s.

Like with write(), this wrapper around the Unix read() syscall adds the ability to handle 'fake' file descriptors in tests, and reduces the chances of clobbering outside array bounds.

One bit of weirdness here: in tests we do a redundant copy from one stream to another. See the comments before the implementation for a discussion of alternative interfaces.
stop: takes two arguments:
- ed is an address to an exit descriptor. Exit descriptors allow us to exit() the program in production, but return to the test harness within tests. That allows tests to make assertions about when exit() is called.
- value is the status code to exit() with.
For more details on exit descriptors and how to create one, see the comments before the implementation.
new-segment

Allocates a whole new segment of memory for the program, discontiguous with both existing code and data (heap) segments. Just a more opinionated form of mmap.
allocate: takes two arguments, an address to allocation-descriptor ad and an integer n

Allocates a contiguous range of memory that is guaranteed to be exclusively available to the caller. Returns the starting address to the range in eax.

An allocation descriptor tracks allocated vs available addresses in some contiguous range of memory. The int specifies the number of bytes to allocate.

Explicitly passing in an allocation descriptor allows for nested memory management, where a sub-system gets a chunk of memory and further parcels it out to individual allocations. Particularly helpful for (surprise) tests.
... (to be continued)

I will continue to import syscalls over time from the old Mu VM in the parent directory, which has experimented with interfaces for the screen, keyboard, mouse, disk and network.

primitives built atop system calls

(Compound arguments are usually passed in by reference. Where the results are compound objects that don't fit in a register, the caller usually passes in allocated memory for it.)

assertions for tests

check-ints-equal: fails current test if given ints aren't equal
check-stream-equal: fails current test if stream doesn't match string
check-next-stream-line-equal: fails current test if next line of stream until newline doesn't match string

error handling

error: takes three arguments, an exit-descriptor, a file and a string (message)

Prints out the message to the file and then exits using the provided exit-descriptor.
error-byte: like error but takes an extra byte value that it prints out at the end of the message.

predicates

kernel-string-equal?: compares a kernel string with a string
string-equal?: compares two strings
stream-data-equal?: compares a stream with a string
next-stream-line-equal?: compares with string the next line in a stream, from read index to newline
slice-empty?: checks if the start and end of a slice are equal
slice-equal?: compares a slice with a string
slice-starts-with?: compares the start of a slice with a string
slice-ends-with?: compares the end of a slice with a string

writing to disk

write: string -> file
- Can also be used to cat a string into a stream.
- Will abort the entire program if destination is a stream and doesn't have enough room.
write-stream: stream -> file
- Can also be used to cat one stream into another.
- Will abort the entire program if destination is a stream and doesn't have enough room.
write-slice: slice -> stream
- Will abort the entire program if there isn't enough room in the destination stream.
append-byte: int -> stream
- Will abort the entire program if there isn't enough room in the destination stream.
append-byte-hex: int -> stream
- textual representation in hex, no '0x' prefix
- Will abort the entire program if there isn't enough room in the destination stream.
print-int32: int -> stream
- textual representation in hex, including '0x' prefix
- Will abort the entire program if there isn't enough room in the destination stream.
write-buffered: string -> buffered-file
write-slice-buffered: slice -> buffered-file
flush: buffered-file
write-byte-buffered: int -> buffered-file
print-byte-buffered: int -> buffered-file
- textual representation in hex, no '0x' prefix
print-int32-buffered: int -> buffered-file
- textual representation in hex, including '0x' prefix

reading from disk

read: file -> stream
- Can also be used to cat one stream into another.
- Will silently stop reading when destination runs out of space.
read-byte-buffered: buffered-file -> byte
read-line-buffered: buffered-file -> stream
- Will abort the entire program if there isn't enough room.

non-IO operations on streams

new-stream: allocates space for a stream of n elements, each occupying b bytes.
- Will abort the entire program if n*b requires more than 32 bits.
clear-stream: resets everything in the stream to 0 (except its length).
rewind-stream: resets the read index of the stream to 0 without modifying its contents.

reading/writing hex representations of integers

is-hex-int?: takes a slice argument, returns boolean result in eax
parse-hex-int: takes a slice argument, returns int result in eax
is-hex-digit?: takes a 32-bit word containing a single byte, returns boolean result in eax.
from-hex-char: takes a hexadecimal digit character in eax, returns its numeric value in eax
to-hex-char: takes a single-digit numeric value in eax, returns its corresponding hexadecimal character in eax

tokenization

from a stream:

next-token: stream, delimiter byte -> slice
skip-chars-matching: stream, delimiter byte
skip-chars-not-matching: stream, delimiter byte

from a slice:

next-token-from-slice: start, end, delimiter byte -> slice
- Given a slice and a delimiter byte, returns a new slice inside the input that ends at the delimiter byte.
skip-chars-matching-in-slice: curr, end, delimiter byte -> new-curr (in eax)
skip-chars-not-matching-in-slice: curr, end, delimiter byte -> new-curr (in eax)

Resources

“Bootstrapping a compiler from nothing” by Edmund Grumley-Evans.
“Creating tiny ELF executables” by Brian Raiter.
StoneKnifeForth by Kragen Sitaker.

Conclusion

The hypothesis of Mu and SubX is that designing the entire system to be testable from day 1 and from the ground up would radically impact the culture of the eco-system in a way that no bolted-on tool or service at higher levels can replicate:

Tests would make it easier to write programs that can be easily understood by newcomers.
More broad-based understanding would lead to more forks.
Tests would make it easy to share code across forks. Copy the tests over, and then copy code over and polish it until the tests pass. Manual work, but tractable and without major risks.
The community would gain a diversified portfolio of forks for each program, a “wavefront” of possible combinations of features and alternative implementations of features. Application writers who wrote thorough tests for their apps (something they just can’t do today) would be able to bounce around between forks more easily without getting locked in to a single one as currently happens.
There would be a stronger culture of reviewing the code for programs you use or libraries you depend on. More eyeballs would make more bugs shallow.

To falsify these hypotheses, here's a roadmap of the next few planned features:

Testable, dependency-injected vocabulary of primitives
- Streams: read(), write(). (✓)
- exit() (✓)
- Client-like non-blocking socket/file primitives: load, save
- Concurrency, and a framework for testing blocking code
- Server-like blocking socket/file primitives
Higher-level notations. Like programming languages, but with thinner implementations that you can -- and are expected to! -- modify.
- syntax for addressing modes: %reg, *reg, *(reg+disp), *(reg+reg+disp), *(reg+reg<<n + disp)
- function calls in a single line, using addressing modes for arguments
- syntax for controlling a type checker, like the mu1 prototype.
- a register allocation verifier. Programmer provides registers for variables; verifier checks that register reads are for the same type that was last written -- across all control flow paths.
Gradually streamline the bundled kernel, stripping away code we don't need.

If you're still reading, here are some more things to check out:

a) Try running the tests:

$ ./test_apps

b) Check out the online help. Try typing just ./subx, and then ./subx help.

c) Familiarize yourself with ./subx help opcodes. You'll spend a lot of time with it. (It's also in this repo.) Here are some tips on my setup for quickly finding the right opcode for any situation from within Vim.

d) Try working on the starter exercises (labelled hello).

Credits

Mu builds on many ideas that have come before, especially:

Peter Naur for articulating the paramount problem of programming: communicating a codebase to others;
Christopher Alexander and Richard Gabriel for the intellectual tools for reasoning about the higher order design of a codebase;
Unix and C for showing us how to co-evolve language and OS, and for teaching the (much maligned, misunderstood and underestimated) value of concise implementation in addition to a clean interface;
Donald Knuth's literate programming for liberating "code for humans to read" from the tyranny of compiler order;
David Parnas and others for highlighting the value of separating concerns and stepwise refinement;
Lisp for showing the power of dynamic languages, late binding and providing the right primitives a la carte, especially lisp macros;
The folklore of debugging by print and the trace facility in many lisp systems;
Automated tests for showing the value of developing programs inside an elaborate harness;
Python doctest for exemplifying interactive documentation that doubles as tests;
ReStructuredText and its antecedents for showing that markup can be clean;
BDD for challenging us all to write tests at a higher level;
JavaScript and CSS for demonstrating the power of a DOM for complex structured documents;
Rust for demonstrating that a system-programming language can be safe;
Forth for demonstrating that ergonomics don't require grammar; and
Minimal Linux Live for teaching how to create a bootable disk image.
Soso, a tiny hackable OS.

Coda

Some details on the unconventional organization of this project.
Previous prototypes: mu0, mu1.

Name		Name	Last commit message	Last commit date
Latest commit History 4,843 Commits
apps		apps
archive		archive
browse_trace		browse_trace
cleave		cleave
enumerate		enumerate
examples		examples
html		html
kernel.soso		kernel.soso
linkify		linkify
tangle		tangle
termbox		termbox
000organization.cc		000organization.cc
001help.cc		001help.cc
002test.cc		002test.cc
003trace.cc		003trace.cc
003trace.test.cc		003trace.test.cc
010---vm.cc		010---vm.cc
011run.cc		011run.cc
012elf.cc		012elf.cc
013direct_addressing.cc		013direct_addressing.cc
014indirect_addressing.cc		014indirect_addressing.cc
015immediate_addressing.cc		015immediate_addressing.cc
016index_addressing.cc		016index_addressing.cc
017jump_disp8.cc		017jump_disp8.cc
018jump_disp32.cc		018jump_disp32.cc
019functions.cc		019functions.cc
020syscalls.cc		020syscalls.cc
021byte_addressing.cc		021byte_addressing.cc
022div.cc		022div.cc
030---translate.cc		030---translate.cc
031transforms.cc		031transforms.cc
032---operands.cc		032---operands.cc
033check_operands.cc		033check_operands.cc
034check_operand_bounds.cc		034check_operand_bounds.cc
035compute_segment_address.cc		035compute_segment_address.cc
036labels.cc		036labels.cc
037global_variables.cc		037global_variables.cc
038---literal_strings.cc		038---literal_strings.cc
039debug.cc		039debug.cc
040---tests.cc		040---tests.cc
050_write.subx		050_write.subx
051test.subx		051test.subx
052kernel-string-equal.subx		052kernel-string-equal.subx
053new-segment.subx		053new-segment.subx
054string-equal.subx		054string-equal.subx
055stream.subx		055stream.subx
056trace.subx		056trace.subx
057write.subx		057write.subx
058stream-equal.subx		058stream-equal.subx
059stop.subx		059stop.subx
060read.subx		060read.subx
061read-byte.subx		061read-byte.subx
062write-stream.subx		062write-stream.subx
063error.subx		063error.subx
064write-byte.subx		064write-byte.subx
065write-buffered.subx		065write-buffered.subx
066print-int.subx		066print-int.subx
067parse-hex.subx		067parse-hex.subx
068error-byte.subx		068error-byte.subx
069allocate.subx		069allocate.subx
070new-stream.subx		070new-stream.subx
071read-line.subx		071read-line.subx
072slice.subx		072slice.subx
073next-token.subx		073next-token.subx
074write-stream-data.subx		074write-stream-data.subx
075print-int-decimal.subx		075print-int-decimal.subx
076next-word.subx		076next-word.subx
077subx-words.subx		077subx-words.subx
078emit-hex.subx		078emit-hex.subx
079emit.subx		079emit.subx
080zero-out.subx		080zero-out.subx
081table.subx		081table.subx
082slurp.subx		082slurp.subx
083subx-widths.subx		083subx-widths.subx
084emit-hex-array.subx		084emit-hex-array.subx
092write-int.subx		092write-int.subx
093array-equal.subx		093array-equal.subx
094next-word-or-string.subx		094next-word-or-string.subx
095stack.subx		095stack.subx
999index		999index
Readme.md		Readme.md
build		build
build_and_test_until		build_and_test_until
cheatsheet.pdf		cheatsheet.pdf
clean		clean
debug_translate		debug_translate
diff_ntranslate		diff_ntranslate
diff_translate		diff_translate
edit		edit
exuberant_ctags_rc		exuberant_ctags_rc
gen_linux_iso		gen_linux_iso
gen_soso_iso		gen_soso_iso
index.html		index.html
init.linux		init.linux
init.soso		init.soso
modrm.pdf		modrm.pdf
ntranslate		ntranslate
opcodes		opcodes
run_one_test		run_one_test
run_one_test.subx		run_one_test.subx

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Mu: a human-scale computer

Goals

Non-goals

What works so far

What it looks like

Lengthy interlude: How x86 instructions compute operands

Putting it all together

The syntax of SubX programs

Running

A few hints for debugging

Reference documentation on available primitives

Data Structures

'system calls'

primitives built atop system calls

assertions for tests

error handling

predicates

writing to disk

reading from disk

non-IO operations on streams

reading/writing hex representations of integers

tokenization

Resources

Conclusion

Credits

Coda

About

Releases

Packages

Languages

sailfish009/mu

Folders and files

Latest commit

History

Repository files navigation

Mu: a human-scale computer

Goals

Non-goals

What works so far

What it looks like

Lengthy interlude: How x86 instructions compute operands

Putting it all together

The syntax of SubX programs

Running

A few hints for debugging

Reference documentation on available primitives

Data Structures

'system calls'

primitives built atop system calls

assertions for tests

error handling

predicates

writing to disk

reading from disk

non-IO operations on streams

reading/writing hex representations of integers

tokenization

Resources

Conclusion

Credits

Coda

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages