Tags: sunrunner20/UVtools
Tags
v2.13.1 - (Add) Layer preview - Outline: Skeletonize - (Add) Actions - Export layers to skeleton: Export a layer range to a skeletonized image that is the sum of each layer skeleton - (Add) Pixel editor - Text: Allow to rotate text placement by any angle (sn4k3#206) - (Add) Calibrate - XYZ Accuracy: Drain hole diameter (sn4k3#205)
v2.12.0 - **Layer arithmetic:** - (Add) Allow to use ':' to define a layer range to set, eg, 0:20 to select from 0 to 20 layers - (Improvement) Modifications with set ROI and/or Mask(s) are only applied to target layer on that same regions - (Improvement) Disallow set one layer to the same layer without any modification - (Improvement) Clear and sanitize non-existing layers indexes - (Improvement) Disable the layer range selector from dialog - (Fix) Prevent error when using non-existing layers indexes - (Fix) Allow use only a mask for operations - (Fix) Implement the progress bar - **File formats:** - (Add) VDA.ZIP (Voxeldance Additive) - (Improvement) Add a check to global `LightPWM` if 0 it will force to 255 - (Improvement) Add a check to layer `LightPWM` if 0 it will force to 255 - (Add) Allow to save the selected region (ROI) to a image file - (Update) .NET 5.0.5 to 5.0.6 - (Fix) Getting the transposed rectangle in fliped images are offseting the position by -1 - (Fix) Tools: Hide ROI Region text when empty/not selected
v2.11.1 - **Shortcuts:** - (Add) (Ctrl + Shift + R) to turn on and cycle the Rotate modes - (Add) (Ctrl + Shift + F) to turn on and cycle the Flip modes - (Add) (Ctrl + Shift + B) to select the build volume as ROI - **GUI:** - (Add) Allow to drag and drop '.uvtop' files into UVtools to sequential show and load operations from files - (Change) Rotate icon on layer preview - (Upgrade) AvaloniaUI from 0.10.3 to 0.10.4 - **Tools:** - (Add) 'Reset to defaults' button on every dialog - (Improvement) Window size and position handling - (Improvement) Constrain profile box width to not stretch the window - (Improvement) ROI section design - **Dynamic lift:** - (Add) View buttons to show the largest/smallest layers - (Add) Light-off mode: Set the light-off with an extra delay - (Add) Light-off mode: Set the light-off without an extra delay - (Add) Light-off mode: Set the light-off to zero - (Improvement) Disable bottom and/or normal layer fields when the selected range is outside - (Add) Settings - Automations: Light-off delay set modes - (Fix) Exposure time finder: Add staircase, bullseye and counter triangles to feature count at thumbnail
v2.11.0 - **Tools:** - (Add) Pixel Arithmetic - (Add) Layer arithmetic: Operator $ to perform a absolute difference - (Add) Allow to save and auto restore operation settings per session (sn4k3#195) - (Add) Allow to auto select the print volume ROI - (Add) Allow to export and import operation settings from files - (Improvement) Calculator - LightOff delay: Hide the bottom properties or the tab if the file format don't support them (sn4k3#193) - (Change) 'Arithmetic' to 'Layer arithmetic' - (Remove) 'Threshold pixels' - (Fix) Solidfy was unable to save profiles - (Fix) A redo operation (Ctrl + Shift + Z) wasn't restoring the settings when a default profile is set - **Operations:** - (Fix) Passing a roi mat to `ApplyMask` would cause unwanted results - (Improvement) Allow pass a full/original size mask to `ApplyMask` - **Scripting:** - (Add) an script to create an printable file to clean the VAT (sn4k3#170) - (Improvement) Allow to change user input properties outside the initialization - (Improvement) Auto format numerical input box with the fixed decimal cases - (Add) Settings: Section 'Tools' - (Improvement) GUI: The 'Lift, Retract and Light-off' at status bar now only shows for the supported formats - (Fix) Print time estimation calculation was wrong since v2.9.3 due a lacking of parentheses on the logic
v2.10.0 - **Exposure time finder:** - Add a enable option for each feature - Add a staircase: Creates an incremental stair at top from left to right that goes up to the top layer - Add a section dedicated to the bullseye and revamp the design - Add a section for counter triangles (this will take the space of the old bullseye) - Allow negative fence offset for zebra bars - Allow to preview the exposure time information - Changed some defaults - (Add) Layer actions - Export layers to animated GIF - **Note:** Non Windows users must install 'libgdiplus' dependency in order to use this tool - (Add) Tools - Dynamic lifts: Generate dynamic lift height and speeds for each layer given it mass - (Improvement) File formats using json files are now saved with human readable indentation - (Fix) GCode builder: Raise to top on completion command was not being sent when feedrate units are in mm/min - (Fix) Tools - Layer Range Selector: Fix the 'to layer' minimum to not allow negative values and limit to 0
v2.9.3 - (Upgrade) AvaloniaUI from 0.10.2 to 0.10.3 - (Change) PrusaSlicer printers: Set 'Light-Off Delay' and 'Bottom Light-Off Delay' to 0 as default to allow UVtools auto-compute the right value once open the file in - **Exposure time finder:** - Optimize layers by merge same position/exposure layers - Add a fence option to the zebra bars - Add a option to pattern the loaded model and generate multiple exposures on that - Allow to generate tests without the holes feature - Prevent from using more chamfers than the base height - Removed two of the largest holes - Hide not so often used 'Multiple brightness' and 'Multiple layer height' by default - Disable Anti-Aliasing by default - Change 'Part margin' from 1.5mm to 2.0mm - Change 'Multiple exposures - Bottom exposure step' default to 0 - Fix a error when generating tests with multiple exposures - Fix some typos - **XYZ accuracy test:** - Change 'Wall thickess' default from 2.5mm to 3.0mm - (Improvement) Allow compute print time without a lift sequence
PreviousNext