This app integrates the Xiaomi mi flora sensor and Xiaomi mi flora ropot into Homey.
Do you like the app? You can make me happy by buying me a beer!
Q1 Why can’t the sensor be found by Homey?
- Check if the sensor is connected to another bluetooth device. The
Xiaomi Mi Floraapp for example
Q1 Why are the readings from the sensors different from in the
Xiaomi Mi Floraapp?
- It is caused by old firmware (2.7.0), try to update the sensors through the
Xiaomi Mi Floraapp
Q3 Is the app compatibel with v2.0.0?
- The app is only compatible from v2.1.2 and up due to change to the BLE core.
Q4 Is the app compatibel with SDK 3?
- Yes the app is compatible from v3.0.0
- Install app
- Add the device(s) to Homey.
- Configure the threshold in the device configuration.
- Make a flow with one of the cards.
You can configure the timeout between polls in the app's settings.
- Some device sensor has changed.
- sensor (Moisture)
- value (20%)
- report (The moisture of Flora 1 has changed to: 20%.)
- Some device sensor is updated.
- sensor (Moisture)
- value (20%)
- report (The moisture is updated to: 20%.)
- Sensor value is below the configured threshold.
- sensor (Moisture)
- value (20%)
- report (The moisture (20%) is too low. This can be at least 30%.)
- Sensor value is above the configured threshold.
- sensor (Moisture)
- value (20%)
- report (The moisture (20%) is too high. This must be a maximum of 15%.)
- De plant has a correct temperature.
- De plant has enough sunlight.
- De plant has enough nutrition.
- De plant has enough moisture.
- Some device sensor has changed.
- device (Flora 1)
- sensor (Moisture)
- value (20%)
- report (The moisture has changed to: 20%.)
- Some device sensor is updated.
- device (Flora 1)
- sensor (Moisture)
- value (20%)
- report (The moisture is updated to: 20%.)
- Sensor value is below the configured threshold.
- device (Flora 1)
- sensor (Moisture)
- value (20%)
- report (The moisture (20%) is too low. This can be at least 30%.)
- Sensor value is above the configured threshold.
- device (Flora 1)
- sensor (Moisture)
- value (20%)
- report (The moisture (20%) is too high. This must be a maximum of 15%.)
- Sensor value is outside the configured threshold.
- device (Flora 1)
- sensor (Moisture)
- value (20%)
- report (The moisture (20%) is too high. This must be a maximum of 15%.)
- Sensor gives a timeout after 3 tries.
- device (Flora 1)
- reason (Not in range)
- De plant has a correct temperature.
- De plant has enough sunlight.
- De plant has enough nutrition.
- De plant has enough moisture.
- Synchronise all sensor values with Homey.
The repository is available at: https://github.com/koktaildotcom/homey-mi-flora