RP2040_SD Library

Features

This is an Arduino library for RP2040-based SPI SD Cards.

It's based on and modified from :

SdFat Version 2 supports FAT16/FAT32 and exFAT SD cards. It is mostly backward compatible with SdFat Version 1 for FAT16/FAT32 cards.

exFAT supports files larger than 4GB so files sizes and positions are type uint64_t for classes that support exFAT.

exFAT has many features not available in FAT16/FAT32.  exFAT has excellent support for contiguous files on flash devices and supports preallocation.

If the SD card is the only SPI device, use dedicated SPI mode. This can greatly improve performance.

This library was created as an effort to use SD Card while the arduino-pico core still has issue SD card FILE_WRITE issue #214, which has been fixed from core v1.8.6.

It's better to use the built-in SD library for Earle Philhower's arduino-pico core v1.8.6+.

But if you need to write codes to be used in both Arduino-mbed RP2040 core and Earle Philhower's arduino-pico core without having to modify the code, you can have the option to use this library.

Currently supported Boards

RP2040-based boards such as NANO_RP2040_CONNECT, RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040, etc. using either Arduino-mbed RP2040 core or Earle Philhower's arduino-pico core.

Prerequisites

Arduino IDE 1.8.19+ for Arduino.
Arduino mbed_rp2040 core 3.4.1+ for Arduino (Use Arduino Board Manager) RP2040-based boards, such as Arduino Nano RP2040 Connect, RASPBERRY_PI_PICO, etc..
Earle Philhower's arduino-pico core v2.6.3+ for RP2040-based boards such as RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040, etc.

Installation

Use Arduino Library Manager

The best and easiest way is to use Arduino Library Manager. Search for RP2040_SD, then select / install the latest version. You can also use this link for more detailed instructions.

Manual Install

Another way to install is to:

Navigate to RP2040_SD page.
Download the latest release RP2040_SD-main.zip.
Extract the zip file to RP2040_SD-main directory
Copy whole RP2040_SD-main folder to Arduino libraries' directory such as ~/Arduino/libraries/.

VS Code & PlatformIO

Install VS Code
Install PlatformIO
Install RP2040_SD library by using Library Manager. Search for RP2040_SD in Platform.io Author's Libraries
Use included platformio.ini file from examples to ensure that all dependent libraries will installed automatically. Please visit documentation for the other options and examples at Project Configuration File

Examples

Example ReadWrite

1. File ReadWrite.ino

RP2040_SD/examples/ReadWrite/ReadWrite.ino

Lines 26 to 167 in c1c62cc

    
           /* 
        
             SD card connection 
        
             This example shows how to read and write data to and from an SD card file 
        
             The circuit: 
        
              SD card attached to SPI bus as follows: 
        
              // Arduino-pico core 
        
              ** MISO - pin 16 
        
              ** MOSI - pin 19 
        
              ** CS   - pin 17 
        
              ** SCK  - pin 18 
        
              // Arduino-mbed core 
        
              ** MISO - pin 4 
        
              ** MOSI - pin 3 
        
              ** CS   - pin 5 
        
              ** SCK  - pin 2 
        
           */ 
        
           #if !defined(ARDUINO_ARCH_RP2040) 
        
             #error For RP2040 only 
        
           #endif 
        
           #if defined(ARDUINO_ARCH_MBED) 
        
             #define PIN_SD_MOSI       PIN_SPI_MOSI 
        
             #define PIN_SD_MISO       PIN_SPI_MISO 
        
             #define PIN_SD_SCK        PIN_SPI_SCK 
        
             #define PIN_SD_SS         PIN_SPI_SS 
        
           #else 
        
             #define PIN_SD_MOSI       PIN_SPI0_MOSI 
        
             #define PIN_SD_MISO       PIN_SPI0_MISO 
        
             #define PIN_SD_SCK        PIN_SPI0_SCK 
        
             #define PIN_SD_SS         PIN_SPI0_SS 
        
           #endif 
        
           #define _RP2040_SD_LOGLEVEL_       4 
        
           #include <SPI.h> 
        
           #include <RP2040_SD.h> 
        
           File myFile; 
        
           void setup() 
        
           { 
        
             // Open serial communications and wait for port to open: 
        
             Serial.begin(115200); 
        
             while (!Serial); 
        
             delay(1000); 
        
           #if defined(ARDUINO_ARCH_MBED) 
        
             Serial.print("Starting SD Card ReadWrite on MBED "); 
        
           #else 
        
             Serial.print("Starting SD Card ReadWrite on "); 
        
           #endif 
        
             Serial.println(BOARD_NAME); 
        
             Serial.println(RP2040_SD_VERSION); 
        
             Serial.print("Initializing SD card with SS = "); 
        
             Serial.println(PIN_SD_SS); 
        
             Serial.print("SCK = "); 
        
             Serial.println(PIN_SD_SCK); 
        
             Serial.print("MOSI = "); 
        
             Serial.println(PIN_SD_MOSI); 
        
             Serial.print("MISO = "); 
        
             Serial.println(PIN_SD_MISO); 
        
             if (!SD.begin(PIN_SD_SS)) 
        
             { 
        
               Serial.println("Initialization failed!"); 
        
               return; 
        
             } 
        
             Serial.println("Initialization done."); 
        
           #define fileName  "newtest0.txt" 
        
             char writeData[]  = "Testing writing to " fileName; 
        
             // open the file. note that only one file can be open at a time, 
        
             // so you have to close this one before opening another. 
        
             myFile = SD.open(fileName, FILE_WRITE); 
        
             // if the file opened okay, write to it: 
        
             if (myFile) 
        
             { 
        
               Serial.print("Writing to "); 
        
               Serial.print(fileName); 
        
               Serial.print(" ==> "); 
        
               Serial.println(writeData); 
        
               myFile.println(writeData); 
        
               // close the file: 
        
               myFile.close(); 
        
               Serial.println("done."); 
        
             } 
        
             else 
        
             { 
        
               // if the file didn't open, print an error: 
        
               Serial.print("Error opening "); 
        
               Serial.println(fileName); 
        
             } 
        
             // re-open the file for reading: 
        
             myFile = SD.open(fileName, FILE_READ); 
        
             if (myFile) 
        
             { 
        
               Serial.print("Reading from "); 
        
               Serial.println(fileName); 
        
               Serial.println("==============="); 
        
               // read from the file until there's nothing else in it: 
        
               while (myFile.available()) 
        
               { 
        
                 Serial.write(myFile.read()); 
        
               } 
        
               // close the file: 
        
               myFile.close(); 
        
               Serial.println("==============="); 
        
             } 
        
             else 
        
             { 
        
               // if the file didn't open, print an error: 
        
               Serial.print("Error opening "); 
        
               Serial.println(fileName); 
        
             } 
        
           } 
        
           void loop() 
        
           { 
        
             // nothing happens after setup 
        
           }

Debug Terminal Output Samples

1. CardInfo on MBED RaspberryPi Pico

The following is the sample terminal output when running example CardInfo on MBED RaspberryPi Pico using Arduino-mbed RP2040 core

Starting SD Card CardInfo on MBED RaspberryPi Pico
MBED RP2040_SD v1.0.1
Initializing SD card with SS = 5
SCK = 2
MOSI = 3
MISO = 4
Wiring is correct and a card is present.

Card type:         SDHC
Clusters:          982896
Blocks x Cluster:  64
Total Blocks:      62905344

Volume type is:    FAT32
Volume size (Kb):  31452672
Volume size (Mb):  30715
Volume size (Gb):  30.00
Initialization done.

Files found on the card (name, date and size in bytes): 
DATALOG.TXT		144
TEST.TXT		36
NEWTEST.TXT		36
NEWTEST1.TXT		18
MYDATA~1.TXT		0
NEWTEST2.TXT		54
NEWTEST3.TXT		54
NEWTEST4.TXT		72
NEWTEST0.TXT		297
NEWDATA.TXT		18

2. DumpFile on MBED RaspberryPi Pico

The following is the sample terminal output when running example DumpFile on MBED RaspberryPi Pico using Arduino-mbed RP2040 core

Starting SD Card DumpFile on MBED RaspberryPi Pico
MBED RP2040_SD v1.0.1
Initializing SD card with SS = 5
SCK = 2
MOSI = 3
MISO = 4
Initialization done.
====== Data ======
Testing RP2040 SD
====== Data ======
[SD] Closed " newdata.txt ", nfilecount =  0

3. ListFiles on MBED RaspberryPi Pico

The following is the sample terminal output when running example ListFiles on MBED RaspberryPi Pico using Arduino-mbed RP2040 core

Starting SD Card ListFiles on MBED RaspberryPi Pico
MBED RP2040_SD v1.0.1
Initializing SD card with SS = 5
SCK = 2
MOSI = 3
MISO = 4
Initialization done.
DATALOG.TXT		126
TEST.TXT		36
NEWTEST.TXT		36
NEWTEST1.TXT		18
MYDATA~1.TXT		0
NEWTEST2.TXT		54
NEWTEST3.TXT		54
NEWTEST4.TXT		72
NEWTEST0.TXT		297
Print Directory done!
writeData = Testing RP2040 SD
readData = Testing RP2040 SD
DATALOG.TXT		144
TEST.TXT		36
NEWTEST.TXT		36
NEWTEST1.TXT		18
MYDATA~1.TXT		0
NEWTEST2.TXT		54
NEWTEST3.TXT		54
NEWTEST4.TXT		72
NEWTEST0.TXT		297
NEWDATA.TXT		18
Print Directory done!

4. ReadWrite on MBED RaspberryPi Pico

The following is the sample terminal output when running example ReadWrite on MBED RaspberryPi Pico using Arduino-mbed RP2040 core

Starting SD Card ReadWrite on MBED RaspberryPi Pico
MBED RP2040_SD v1.0.1
Initializing SD card with SS = 5
SCK = 2
MOSI = 3
MISO = 4
initialization done.
Writing to newtest0.txt ==> Testing writing to newtest0.txt
[SD] Closed " newtest0.txt ", nfilecount =  0
done.
Reading from newtest0.txt
===============
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
[SD] Closed " newtest0.txt ", nfilecount =  0
===============

5. Files on MBED RaspberryPi Pico

The following is the sample terminal output when running example Files on MBED RaspberryPi Pico using Arduino-mbed RP2040 core

Starting SD Card Files on MBED RaspberryPi Pico
MBED RP2040_SD v1.0.1
Initializing SD card with SS = 5
SCK = 2
MOSI = 3
MISO = 4
Initialization done.
example.txt doesn't exist.
Creating example.txt
writeData = 0xDEADBEEF
[SD] Closed " example.txt ", nfilecount =  0
readData = 0xDEADBEEF
[SD] Closed " example.txt ", nfilecount =  0
example.txt exists.
Removing example.txt...
example.txt doesn't exist.

6. CardInfo on RASPBERRY_PI_PICO

The following is the sample terminal output when running example CardInfo on RASPBERRY_PI_PICO using arduino-pico core

Starting SD Card CardInfo on RASPBERRY_PI_PICO
RP2040_SD v1.0.1
Initializing SD card with SS = 17
SCK = 18
MOSI = 19
MISO = 16
Wiring is correct and a card is present.

Card type:         SDHC
Clusters:          1965597
Blocks x Cluster:  32
Total Blocks:      62899104

Volume type is:    FAT32
Volume size (Kb):  31449552
Volume size (Mb):  30712
Volume size (Gb):  29.99
Initialization done.

Files found on the card (name, date and size in bytes): 
DATALOG.TXT		267
DEMO.TXT		360960
CANADA~1.JPG		11156
TEST.TXT		72
NEWTEST4.TXT		132
NEWTEST0.TXT		330
NEWDATA.TXT		54

7. DumpFile on RASPBERRY_PI_PICO

The following is the sample terminal output when running example DumpFile on RASPBERRY_PI_PICO using arduino-pico core

Starting SD Card DumpFile on RASPBERRY_PI_PICO
RP2040_SD v1.0.1
Initializing SD card with SS = 17
SCK = 18
MOSI = 19
MISO = 16
Initialization done.
====== Data ======
Testing RP2040 SD
====== Data ======
[SD] Closed " newdata.txt ", nfilecount =  0

8. ListFiles on RASPBERRY_PI_PICO

The following is the sample terminal output when running example ListFiles on RASPBERRY_PI_PICO using arduino-pico core

Starting SD Card ListFiles on RASPBERRY_PI_PICO
RP2040_SD v1.0.1
Initializing SD card with SS = 17
SCK = 18
MOSI = 19
MISO = 16
Initialization done.
DATALOG.TXT		249
DEMO.TXT		82432
CANADA~1.JPG		11156
TEST.TXT		72
NEWTEST4.TXT		132
NEWTEST0.TXT		330
NEWDATA.TXT		36
Print Directory done!
writeData = Testing RP2040 SD
readData = Testing RP2040 SD
DATALOG.TXT		267
DEMO.TXT		82432
CANADA~1.JPG		11156
TEST.TXT		72
NEWTEST4.TXT		132
NEWTEST0.TXT		330
NEWDATA.TXT		54
Print Directory done!

9. ReadWrite on RASPBERRY_PI_PICO

The following is the sample terminal output when running example ReadWrite on RASPBERRY_PI_PICO using arduino-pico core

Starting SD Card ReadWrite on RASPBERRY_PI_PICO
RP2040_SD v1.0.1
Initializing SD card with SS = 17
SCK = 18
MOSI = 19
MISO = 16
initialization done.
Writing to newtest0.txt ==> Testing writing to newtest0.txt
[SD] Closed " newtest0.txt ", nfilecount =  0
done.
Reading from newtest0.txt
===============
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
Testing writing to newtest0.txt
[SD] Closed " newtest0.txt ", nfilecount =  0
===============

10. Files on RASPBERRY_PI_PICO

The following is the sample terminal output when running example Files on RASPBERRY_PI_PICO using arduino-pico core

Starting SD Card Files on RASPBERRY_PI_PICO
RP2040_SD v1.0.1
Initializing SD card with SS = 17
SCK = 18
MOSI = 19
MISO = 16
Initialization done.
example.txt doesn't exist.
Creating example.txt
writeData = 0xDEADBEEF
[SD] Closed " example.txt ", nfilecount =  0
readData = 0xDEADBEEF
[SD] Closed " example.txt ", nfilecount =  0
example.txt exists.
Removing example.txt...
example.txt doesn't exist.

Debug

Debug is enabled by default on Serial.

You can also change the debugging level (RP2040_SD_LOGLEVEL) from 0 to 4

// These define's must be placed at the beginning before #include "RP2040_SD.h"
// _RP2040_SD_LOGLEVEL_ from 0 to 4
#define _RP2040_SD_LOGLEVEL_       0

Troubleshooting

If you get compilation errors, more often than not, you may need to install a newer version of the core for Arduino boards.

Sometimes, the library will only work if you update the board core to the latest version because I am using newly added functions.

Issues

Submit issues to: RP2040_SD issues

TO DO

Search for bug and improvement.

DONE

Basic SD-wrapper library for RP2040-based boards, such as NANO_RP2040_CONNECT, RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040, using Arduino-mbed RP2040 core or Earle Philhower's arduino-pico core.
Add Version String
Add Table of Contents
Add astyle using allman style. Restyle the library

Contributions and Thanks

Many thanks for everyone for bug reporting, new feature suggesting, testing and contributing to the development of this library.

Based on and modified from the Bill Greiman's SdFat library to add support to RP2040-based boards using Arduino-mbed RP2040 core or Earle Philhower's arduino-pico core.
Based on and modified from the Adafruit SD library to add support to RP2040-based boards using Arduino-mbed RP2040 core or Earle Philhower's arduino-pico core.

_{⭐️ Bill Greiman}

_{⭐️ Adafruit}

Contributing

If you want to contribute to this project:

Report bugs and errors
Ask for enhancements
Create issues and pull requests
Tell other people about this library

License

The library is licensed under MIT

Name		Name	Last commit message	Last commit date
Latest commit History 23 Commits
.github		.github
examples		examples
platformio		platformio
src		src
utils		utils
.codespellrc		.codespellrc
.gitignore		.gitignore
CONTRIBUTING.md		CONTRIBUTING.md
LICENSE		LICENSE
README.md		README.md
changelog.md		changelog.md
keywords.txt		keywords.txt
library.json		library.json
library.properties		library.properties

	/*
	SD card connection

	This example shows how to read and write data to and from an SD card file
	The circuit:
	SD card attached to SPI bus as follows:
	// Arduino-pico core
	** MISO - pin 16
	** MOSI - pin 19
	** CS - pin 17
	** SCK - pin 18

	// Arduino-mbed core
	** MISO - pin 4
	** MOSI - pin 3
	** CS - pin 5
	** SCK - pin 2
	*/


	#if !defined(ARDUINO_ARCH_RP2040)
	#error For RP2040 only
	#endif

	#if defined(ARDUINO_ARCH_MBED)

	#define PIN_SD_MOSI PIN_SPI_MOSI
	#define PIN_SD_MISO PIN_SPI_MISO
	#define PIN_SD_SCK PIN_SPI_SCK
	#define PIN_SD_SS PIN_SPI_SS

	#else

	#define PIN_SD_MOSI PIN_SPI0_MOSI
	#define PIN_SD_MISO PIN_SPI0_MISO
	#define PIN_SD_SCK PIN_SPI0_SCK
	#define PIN_SD_SS PIN_SPI0_SS

	#endif

	#define _RP2040_SD_LOGLEVEL_ 4

	#include <SPI.h>
	#include <RP2040_SD.h>

	File myFile;

	void setup()
	{
	// Open serial communications and wait for port to open:
	Serial.begin(115200);

	while (!Serial);

	delay(1000);

	#if defined(ARDUINO_ARCH_MBED)
	Serial.print("Starting SD Card ReadWrite on MBED ");
	#else
	Serial.print("Starting SD Card ReadWrite on ");
	#endif

	Serial.println(BOARD_NAME);
	Serial.println(RP2040_SD_VERSION);

	Serial.print("Initializing SD card with SS = ");
	Serial.println(PIN_SD_SS);
	Serial.print("SCK = ");
	Serial.println(PIN_SD_SCK);
	Serial.print("MOSI = ");
	Serial.println(PIN_SD_MOSI);
	Serial.print("MISO = ");
	Serial.println(PIN_SD_MISO);

	if (!SD.begin(PIN_SD_SS))
	{
	Serial.println("Initialization failed!");
	return;
	}

	Serial.println("Initialization done.");

	#define fileName "newtest0.txt"
	char writeData[] = "Testing writing to " fileName;

	// open the file. note that only one file can be open at a time,
	// so you have to close this one before opening another.
	myFile = SD.open(fileName, FILE_WRITE);

	// if the file opened okay, write to it:
	if (myFile)
	{
	Serial.print("Writing to ");
	Serial.print(fileName);
	Serial.print(" ==> ");
	Serial.println(writeData);

	myFile.println(writeData);

	// close the file:
	myFile.close();
	Serial.println("done.");
	}
	else
	{
	// if the file didn't open, print an error:
	Serial.print("Error opening ");
	Serial.println(fileName);
	}

	// re-open the file for reading:
	myFile = SD.open(fileName, FILE_READ);

	if (myFile)
	{
	Serial.print("Reading from ");
	Serial.println(fileName);
	Serial.println("===============");

	// read from the file until there's nothing else in it:
	while (myFile.available())
	{
	Serial.write(myFile.read());
	}

	// close the file:
	myFile.close();

	Serial.println("===============");
	}
	else
	{
	// if the file didn't open, print an error:
	Serial.print("Error opening ");
	Serial.println(fileName);
	}
	}

	void loop()
	{
	// nothing happens after setup
	}

License

khoih-prog/RP2040_SD

Folders and files

Latest commit

History

Repository files navigation

RP2040_SD Library

Table of Contents

Why do we need this RP2040_SD library

Features

Currently supported Boards

Prerequisites

Installation

Use Arduino Library Manager

Manual Install

VS Code & PlatformIO

Examples

Example ReadWrite

1. File ReadWrite.ino

Debug Terminal Output Samples

1. CardInfo on MBED RaspberryPi Pico

2. DumpFile on MBED RaspberryPi Pico

3. ListFiles on MBED RaspberryPi Pico

4. ReadWrite on MBED RaspberryPi Pico

5. Files on MBED RaspberryPi Pico

6. CardInfo on RASPBERRY_PI_PICO

7. DumpFile on RASPBERRY_PI_PICO

8. ListFiles on RASPBERRY_PI_PICO

9. ReadWrite on RASPBERRY_PI_PICO

10. Files on RASPBERRY_PI_PICO

Debug

Troubleshooting

Issues

TO DO

DONE

Contributions and Thanks

Contributing

License

Copyright

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 2

Packages 0

Languages

Packages