This repository implements the SLAM CT-ICP (see our article), a lightweight, precise and versatile pure LiDAR odometry.

The code can be run with ROS, but also as an independent library, or using scripts we provide.

It is integrated with the python project pyLiDAR-SLAM which gives access to more datasets. pyLiDAR-SLAM requires the installation of the python binding for CT-ICP (see below).

We introduce a new release, with significant changes in the code. We do not guarantee the results of the article in this branch, (though this branch should globally our SLAM). To replicate the results from the dataset, see the release ICRA-2022

Compiler: GCC >= 7.5, clang >= 8.01

cmake >= 3.14

git clone https://github.com/jedeschaud/ct_icp.git
cd ct_icp

CT-ICP uses Kitware's ** Superbuild** to build the external dependencies.

You can either install the external dependencies, or use the script below to install all dependencies:

mkdir .cmake-build-superbuild && cd .cmake-build-superbuild     #< Creates the cmake folder
cmake ../superbuild                                             #< (1) Configure step 
cmake --build . --config Release                                #< Build step (Downloads and install the dependencies), add -DWITH_VIZ3D=ON to install with the GUI

/!\ If you want to build the visualization do not forget to add -DWITH_VIZ3D=ON

If everything worked, a directory install should have been created with at its root a superbuild_import.cmake file.

# Inside the main directory
mkdir cmake-build-release && cd  cmake-build-release                  #< Create the build directory
cmake .. -DCMAKE_BUILD_TYPE=Release                                   #< (2) Configure with the desired options (specify arguments with -D<arg_name>=<arg_value>), add -DWITH_VIZ3D=ON to install with the GUI
cmake --build . --target install --config Release --parallel 12       #< Build and Install the project

/!\ If you want to build the visualization do not forget to add -DWITH_VIZ3D=ON

If everything worked fine, a CT_ICP subdirectory should appear in your Superbuild Directory. You can use the config files located at <SUPERBUILD_INSTALL_DIR>/CT_ICP/lib/cmake to load the libraries in a cmake project, or use ROS or the specified executables.

To build the ROS wrapping for CT-ICP, first build and install the CT-ICP library (see Steps 1 and 2 ).

/!\ Set the CMAKE argument -DWITH_ROS=ON to the configure step (1) of the superbuild (Step 1)

Install the ROSCore library, (this should install a shared library named ROSCore at <CT_ICP_INSTALL_DIR>/CT_ICP/lib):

cd ros/roscore
mkdir cmake-build-release && cd  cmake-build-release                  #< Create the build directory
cmake .. -DCMAKE_BUILD_TYPE=Release                                   #< (2) Configure with the desired options (specify arguments with -D<arg_name>=<arg_value>)
cmake --build . --target install --config Release --parallel 12       #< Build and Install the ROSCore library

Then make a symbolic link of the directory ct_icp_odometry and slam_roscore of this project to the src directory of your catkin workspace.

cd <path-to-your-catkin-workspace>/src                              #< Move to the Catkin Workspace's src directory
ln -s <path-to-ct_icp-git-project>/ros/catkin_ws/ct_icp_odometry ct_icp_odometry        #< Make a symbolic link to the `catkin_ws` folder
ln -s <path-to-ct_icp-git-project>/ros/catkin_ws/slam_roscore slam_roscore        #< Make a symbolic link to the `catkin_ws` folder
cd ..                                                               #< Move back to the root of the catkin workspace
catkin_make -DSUPERBUILD_INSTALL_DIR=<path-to-superbuild-install-dir>

If the installation is successful, and after sourcing the workspace's devel directory, you should be able to launch the ROS Nodes installed.

The wrapping defines the following nodes:

• ct_icp_dataset_node: A node which publishes pointclouds of ct_icp's different datasets read from disk.
• ct_icp_odometry_node: The main odometry node running ct_icp's odometry.

roslaunch ct_icp_odometry launch_slam_dataset.launch dataset_path:=<path-to-dataset-root> dataset:=<dataset_name> sequence:=<sequence_name>

The Datasets are publicly available at: https://cloud.mines-paristech.fr/index.php/s/UwgVFtiTOmrgKp5

The folder is protected by the following password : npm3d

Each dataset is a .zip archive containing the PLY scan file with the relative timestamps for each point in the frame, and if available, the ground truth poses.

To install each dataset, simply download and extract the archives on disk. The datasets are redistributions of existing and copyrighted datasets, we only offer a convenient repackaging of these datasets.

The dataset available are the following:

Under Creative Commons Attribution-NonCommercial-ShareAlike LICENCE

• KITTI (see eval_odometry.php):
  • The most popular benchmark for odometry evaluation.
  • The sensor is a Velodyne HDL-64
  • The frames are motion-compensated (no relative-timestamps) and the Continuous-Time aspect of CT-ICP will not work on this dataset.
  • Contains 21 sequences for ~40k frames (11 with ground truth)
• KITTI_raw (see eval_odometry.php): :
  • The same dataset as KITTI without the motion-compensation, thus with meaningful timestamps.
  • The raw data for sequence 03 is not available
• KITTI_360 (see KITTI-360):
  • The successor of KITTI, contains longer sequences with timestamped point clouds.
  • The sensor is also a Velodyne HDL-64

Permissive LICENSE

• NCLT: (see nclt)
  • Velodyne HDL-32 mounted on a segway
  • 27 long sequences (up to in the campus of MICHIGAN university over a long
  • Challenging motions (abrupt orientation changes)
  • NOTE: For this dataset, directly download the Velodyne links ( e.g. 2012-01-08_vel.tar). Our code directly reads the velodyne_hits.bin file.
• KITTI-CARLA: (see and cite KITTI-CARLA):
  • 7 sequences of 5000 frames generated using the CARLA simulator
  • Imitates the KITTI sensor configuration (64 channel rotating LiDAR)
  • Simulated motion with very abrupt rotations
• ParisLuco (published with our work CT-ICP, cf below to cite us):
  • A single sequence taken around the Luxembourg Garden
  • HDL-32, with numerous dynamic objects

Below we give a list of datasets for we worked on the ROSBags, and for which we propose a roslaunch file.

• UrbanLoco: A Road Dataset for localization in Urban Scenes
• HILTI: A benchmark for precision mapping in construction sites
• SubT: Subterrean datasets acquired in the context of DARPA Subterrean Challenge bu the Army Research Laboratory
• SubT: Subterrean datasets acquired in the context of DARPA Subterrean Challenge bu the Army Research Laboratory
• Newer College Dataset: A large dataset of handheld sensors acquired by the Oxford

For more datasets, don't hesitate to look at this awesome list List of SLAM Datasets.

If the installation of CT-ICP went fine, there should be an executable located at <CT_ICP_INSTALL_DIR>/bin/run_odometry. This executable can be run with a config file with the command:

./run_odometry -c <path-to-config-file>

See ./config/odometry/driving_config.yaml for an example of the format of the config file to expect.

If CT-ICP was installed with viz3d, the SLAM should run along a GUI, otherwise, the trajectory and metrics will be saved to disk regularly.

After the installation, you can also use CT_ICP and SlamCore libraries, located in <CT_ICP_INSTALL_DIR>/lib, for instance with a cmake project with the cmake config files for the libraries located at <CT_ICP_INSTALL_DIR>/lib/cmake.

See for example command/cmd_run_odometry.cpp and command/odometry_runner.h for an example of use.

Some datasets are defined in the library (with expected layout for the Data, see dataset.h, dataset.cpp), but you can extend ct_icp::ADatasetSequence to define your own custom datasets.

After completing the ROS installation, use the launch files defined in ros/catkin_ws/ct_icp_odometry/launch on a rosbag to launch the odometry, for e.g:

roslaunch ct_icp_odometry urban_loco_CAL.launch rosbag:=<path-to-UrbanLoco-root>/CA-20190828190411_blur_align.bag

If you use our work in your research project, please consider citing:

@misc{dellenbach2021cticp,
  title={CT-ICP: Real-time Elastic LiDAR Odometry with Loop Closure},
  author={Pierre Dellenbach and Jean-Emmanuel Deschaud and Bastien Jacquet and François Goulette},
  year={2021},
  eprint={2109.12979},
  archivePrefix={arXiv},
  primaryClass={cs.RO}
}

• Write ROS packaging v.0.1

• Update the Readme.md

• Add integration / performance tests on synthetic data

• Improve the ROS packaging to be more robust in real time to more datasets

• Fix the binding (which is now broken)

• Add tests/automatic build to the Github CI

• Add a wiki (documentation on the code)