Run Dash Masternode with Hardware Wallet

MAINNET READY

- start mn working
- transaction disabled and will be enabled after more testing.

Q : why firmware update ?

- to support Dash testnet, both trezor and keepkey has only Mainnet.
- with Mainnet, no need to update firmware. Use official firmware.

Q : which hw wallet supported ?

- Trezor
- Keepkey
- dashmnb will not run without hw wallet

Q : what can dashmnb do

- config check (alias, address, ip, key, pkey, hw wallet path)
- start masternode missing, selected
- show masternode status
- send coins(mn payment) in hw wallet
- send collateral + coins(mn payment) in hw wallet
- ssh tunnel to use remote dashd
- can use remote rpc service

Q : why Dash-QT or dashd needed ? [if you want to run your own dashd/QT]

- instead of block explorer 
- to check address, collateral, masternode status
- to get unspent tx of collateral
- to relay mnb and txs

Q : why do -reindex ? [if you want to run your own dashd/QT]

- -reindex means restaring dashd or Dash-QT with -reindex option
- after initial checking of masternode config, dashmnb will ask you to do reindex

Q : Which one to do first [if you want to run your own dashd/QT]

- Set up remote node(or masternode), add following to dashd.conf. check dash.conf.sample

    rpcuser=dashrpc#change
    rpcpassword=veryvey-long-complicatedpassword=#change
    rpcallowip=127.0.0.1
    rpcbind=127.0.0.1
    rpcport=9998
    server=1
    daemon=1
    logips=1
    addressindex=1
    spentindex=1
    timestampindex=1
    txindex=1

Run once with dashd/QT with -reindex, to make index

Q : how 'remote rpc service' works ?

- using nginx as proxy
- lua script by https://github.com/adetante/ethereum-nginx-proxy
- need to change version checking
- use ssl by default
- add http basic auth to nginx
- change Authorization header using proxy_set_header
- rpc user name and password on config.py is only for web auth

Installation

1. Install Prerequisites (Ubuntu/Debian)

Make sure Python version 3.5.1 or above is installed:

python3 --version

Check python install script others/linux/Debian-Raspbian-python-3.5.3-install.sh

Update system packages and ensure virtualenv is installed:

sudo apt-get update
sudo apt-get install libudev-dev libusb-1.0-0-dev libfox-1.6-dev
sudo apt-get install autotools-dev autoconf automake libtool
sudo apt-get -y install python3-pip git
sudo pip3 install virtualenv

1. Install Prerequisites (Mac oS)

Install brew and python3.5 or python3.6

/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"    
brew install python3 git
pip3 install virtualenv

2. Install dashmnb

Clone the dashmnb repo and install Python dependencies.

git clone https://github.com/chaeplin/dashmnb && cd dashmnb
virtualenv -p python3 venv3
. venv3/bin/activate
pip install --upgrade setuptools
pip install -r requirements.txt

3. Update

cd dashmnb
. venv3/bin/activate
git pull

pip install --upgrade git+https://github.com/chaeplin/python-trezor
pip install --upgrade git+https://github.com/chaeplin/python-keepkey

4. debug

add DASHMNB_DEBUG=1 

cd dashmnb
. venv3/bin/activate
DASHMNB_DEBUG=1 python bin/dashmnb.py

Udev rule set up for linux

To use keepkey or trezor as normal user, do following

sudo cp others/linux/51-* /etc/udev/rules.d/

Configuration

1. copy dashlib/config.xxxx.py to dashlib/config.py and edit parameters

- use config.sample.mainnet.remotesvc.py to use remote rpc service by chaeplin

- testing config.py : no output if config.py is ok

    cd dashmnb
    . venv3/bin/activate
    python dashlib/config.py

2. Use python bin/hw-wallet-for-mn.py to get a list of address

    cd dashmnb
    . venv3/bin/activate
    python bin/hw-wallet-for-mn.py

(venv3) > python bin/hw-wallet-for-mn.py 
    ____             __  
   / __ \____ ______/ /_ 
  / / / / __ `/ ___/ __ \
 / /_/ / /_/ (__  ) / / /
/_____/\__,_/____/_/ /_/ 
                         
    __  ___           __                            __   
   /  |/  /___ ______/ /____  _________  ____  ____/ /__ 
  / /|_/ / __ `/ ___/ __/ _ \/ ___/ __ \/ __ \/ __  / _ \
 / /  / / /_/ (__  ) /_/  __/ /  / / / / /_/ / /_/ /  __/
/_/  /_/\__,_/____/\__/\___/_/  /_/ /_/\____/\__,_/\___/ 
                                                         
           _ __  __       __  ___       __   _       __      ____     __ 
 _      __(_) /_/ /_     / / / / |     / /  | |     / /___ _/ / /__  / /_
| | /| / / / __/ __ \   / /_/ /| | /| / /   | | /| / / __ `/ / / _ \/ __/
| |/ |/ / / /_/ / / /  / __  / | |/ |/ /    | |/ |/ / /_/ / / /  __/ /_  
|__/|__/_/\__/_/ /_/  /_/ /_/  |__/|__/     |__/|__/\__,_/_/_/\___/\__/  
                                                                         

            by : chaeplin

Network : MAINNET
===> trezor HW Wallet found
Use the numeric keypad to describe number positions. The layout is:
    7 8 9
    4 5 6
    1 2 3
Please enter current PIN: 

Passphrase required: 

Confirm your Passphrase: 

**** ====> use following address for 1K collateral of masternode
Dash address: 44'/5'/1'/0/0        XiDWe5fkVcrXBQApmCFQUxpue5iuWcbmcK
Dash address: 44'/5'/1'/0/1        XrQcbEjhncd62v58K122hzTdgdW5Z6TBmm
Dash address: 44'/5'/1'/0/2        XnSibMiJGcoQzCcku4fhR4wWNNfFBrye9h
Dash address: 44'/5'/1'/0/3        XwUXXWL5kUzJNPDAX2wjxnQYkGjJL5AGwg
......

**** ====> use following address for trezor/keepkey wallet(default path)
Dash address: 44'/5'/0'/0/0        XrqJae7jireuCgJSYL31RFiZVV4Yt4g5kX
Dash address: 44'/5'/0'/0/1        XvztPzfywBFpVEzvS9ULkdWmQAZYqUzTeE
Dash address: 44'/5'/0'/0/2        XtTTUntBxZtca2wdEbfidyDfV9SVu6TpR4
Dash address: 44'/5'/0'/0/3        XshN8cA8zsHFxxYee8SnQ8qx1iHXg6TP3s
.......

for testnet

Use output of python bin/hw-wallet-for-mn.py

for mainnet

Use trezor web wallet or keepkey rc clinet to compare address and send 1K Dash to an address of Account #2
Use Account #1 for daily use
To add Account #2, should send small amount to an address of Account #1

https://www.keepkey.com/2017/02/02/dash-now-public-beta/

https://blog.trezor.io/multi-currency-support-bitcoin-dash-and-zcash-in-trezor-wallet-7377d812112a#.36ft1p2c1

3. Set up remote node(or masternode), add following to dashd.conf. check dash.conf.sample [if you want to run your own dashd/QT]

rpcuser=dashrpc#change
rpcpassword=veryvey-long-complicatedpassword=#change
rpcallowip=127.0.0.1
rpcbind=127.0.0.1
rpcport=9998
server=1
daemon=1
logips=1
addressindex=1
spentindex=1
timestampindex=1
txindex=1

4. Run once with -reindex, to make index [if you want to run your own dashd/QT]

    dashd -reindex

5. add ssh key to remote mastrrnode [if you want to run your own dashd/QT]

https://www.digitalocean.com/community/tutorials/how-to-set-up-ssh-keys--2

6. Move mnconf/masternode.conf.sample to mnconf/masternode.conf and edit

7. Run dashmnb.py

    cd dashmnb
    . venv3/bin/activate
    python bin/dashmnb.py

Thanks to

codes form https://github.com/dashpay/electrum-dash
ref : https://github.com/dashpay/dash/blob/v0.12.1.x/dash-docs/protocol-documentation.md by

Name		Name	Last commit message	Last commit date
Latest commit History 133 Commits
bin		bin
cache		cache
dashlib		dashlib
mnconf		mnconf
others		others
tech		tech
test		test
.gitignore		.gitignore
LICENSE.txt		LICENSE.txt
README.md		README.md
command.md		command.md
dash.conf.sample		dash.conf.sample
requirements.txt		requirements.txt

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Repository files navigation

Run Dash Masternode with Hardware Wallet

MAINNET READY

Q : why firmware update ?

Q : which hw wallet supported ?

Q : what can dashmnb do

Q : why Dash-QT or dashd needed ? [if you want to run your own dashd/QT]

Q : why do -reindex ? [if you want to run your own dashd/QT]

Q : Which one to do first [if you want to run your own dashd/QT]

Q : how 'remote rpc service' works ?

Installation

1. Install Prerequisites (Ubuntu/Debian)

1. Install Prerequisites (Mac oS)

2. Install dashmnb

3. Update

4. debug

Udev rule set up for linux

Configuration

1. copy dashlib/config.xxxx.py to dashlib/config.py and edit parameters

2. Use python bin/hw-wallet-for-mn.py to get a list of address

for testnet

for mainnet

3. Set up remote node(or masternode), add following to dashd.conf. check dash.conf.sample [if you want to run your own dashd/QT]

4. Run once with -reindex, to make index [if you want to run your own dashd/QT]

5. add ssh key to remote mastrrnode [if you want to run your own dashd/QT]

6. Move mnconf/masternode.conf.sample to mnconf/masternode.conf and edit

7. Run dashmnb.py

Thanks to

About

Uh oh!

Releases 9

Packages

Uh oh!

Languages

License

chaeplin/dashmnb

Folders and files

Latest commit

History

Repository files navigation

Run Dash Masternode with Hardware Wallet

MAINNET READY

Q : why firmware update ?

Q : which hw wallet supported ?

Q : what can dashmnb do

Q : why Dash-QT or dashd needed ? [if you want to run your own dashd/QT]

Q : why do -reindex ? [if you want to run your own dashd/QT]

Q : Which one to do first [if you want to run your own dashd/QT]

Q : how 'remote rpc service' works ?

Installation

1. Install Prerequisites (Ubuntu/Debian)

1. Install Prerequisites (Mac oS)

2. Install dashmnb

3. Update

4. debug

Udev rule set up for linux

Configuration

1. copy dashlib/config.xxxx.py to dashlib/config.py and edit parameters

2. Use python bin/hw-wallet-for-mn.py to get a list of address

for testnet

for mainnet

3. Set up remote node(or masternode), add following to dashd.conf. check dash.conf.sample [if you want to run your own dashd/QT]

4. Run once with -reindex, to make index [if you want to run your own dashd/QT]

5. add ssh key to remote mastrrnode [if you want to run your own dashd/QT]

6. Move mnconf/masternode.conf.sample to mnconf/masternode.conf and edit

7. Run dashmnb.py

Thanks to

About

Topics

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases 9

Packages 0

Uh oh!

Languages

Packages