Requirements:
- VirtualBox - built with v5.2.8
- Ansible - built with v2.5.2
- Vagrant - built with v2.0.2
see topology file for lab layout
What to do with this lab?:
- clone repo to local machine
- move to cloned dir
- Run
vagrant upto launch lab - connect to mgmt node (#vagrant ssh mgmt)
- switch to ansible user (sudo su / su ansible) - playbooks are located in the home dir of ansible
- move to playbook dir
- run
vyos-info.yml(#ansible-playbook vyos-info.yml)- This will grab the current interface and routing config on vyos-net1
- No ospf routes should be present and will be configured in the next playbook
ok: [vyos-net1] => {
"msg": [
[
"Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,",
" I - ISIS, B - BGP, > - selected route, * - FIB route",
"",
"S>* 0.0.0.0/0 [210/0] via 10.0.2.2, eth0",
"C>* 10.0.2.0/24 is directly connected, eth0",
"C>* 10.0.20.0/24 is directly connected, eth1",
"C>* 10.10.10.0/24 is directly connected, eth2",
"C>* 10.10.15.0/24 is directly connected, eth3",
"C>* 127.0.0.0/8 is directly connected, lo"
]
]
}
- run
vyos-routing.yml(#ansible-playbook vyos-routing.yml) - rerun
vyos-infountil you see all routes confirged (this may take a few runs)
ok: [vyos-net1] => {
"msg": [
[
"Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,",
" I - ISIS, B - BGP, > - selected route, * - FIB route",
"",
"O>* 0.0.0.0/0 [110/10] via 10.10.10.3, eth2, 00:00:26",
" * via 10.10.15.3, eth3, 00:00:26",
"S 0.0.0.0/0 [210/0] via 10.0.2.2, eth0",
"O 1.1.1.1/32 [110/10] is directly connected, dum0, 00:01:16",
"C>* 1.1.1.1/32 is directly connected, dum0",
"O>* 2.2.2.2/32 [110/20] via 10.10.10.3, eth2, 00:00:27",
" * via 10.10.15.3, eth3, 00:00:27",
"O>* 3.3.3.3/32 [110/30] via 10.10.10.3, eth2, 00:00:09",
" * via 10.10.15.3, eth3, 00:00:09",
"O>* 4.4.4.4/32 [110/30] via 10.10.10.3, eth2, 00:00:09",
" * via 10.10.15.3, eth3, 00:00:09",
"O 10.0.2.0/24 [110/10] is directly connected, eth0, 00:01:17",
"C>* 10.0.2.0/24 is directly connected, eth0",
"C>* 10.0.20.0/24 is directly connected, eth1",
"O 10.10.10.0/24 [110/10] is directly connected, eth2, 00:01:20",
"C>* 10.10.10.0/24 is directly connected, eth2",
"O 10.10.15.0/24 [110/10] is directly connected, eth3, 00:01:18",
"C>* 10.10.15.0/24 is directly connected, eth3",
"C>* 127.0.0.0/8 is directly connected, lo",
"O>* 172.16.20.0/24 [110/20] via 10.10.10.3, eth2, 00:00:27",
" * via 10.10.15.3, eth3, 00:00:27",
"O>* 172.16.30.0/24 [110/20] via 10.10.10.3, eth2, 00:00:27",
" * via 10.10.15.3, eth3, 00:00:27",
"O>* 192.168.10.0/24 [110/30] via 10.10.10.3, eth2, 00:00:09",
" * via 10.10.15.3, eth3, 00:00:09",
"O>* 192.168.20.0/24 [110/30] via 10.10.10.3, eth2, 00:00:09",
" * via 10.10.15.3, eth3, 00:00:09"
]
]
}