swarmprom

Swarmprom is a starter kit for Docker Swarm monitoring with Prometheus, Grafana, cAdvisor, Node Exporter, Alert Manager and Unsee.

Install

Clone this repository and run the monitoring stack:

$ git clone https://github.com/stefanprodan/swarmprom.git
$ cd swarmprom

ADMIN_USER=admin \
ADMIN_PASSWORD=admin \
SLACK_URL=https://hooks.slack.com/services/TOKEN \
SLACK_CHANNEL=devops-alerts \
SLACK_USER=alertmanager \
docker stack deploy -c docker-compose.yml mon

Prerequisites:

Docker CE 17.09.0-ce or Docker EE 17.06.2-ee-3
Swarm cluster with one manager and a worker node
Docker engine experimental enabled and metrics address set to 0.0.0.0:9323

Services:

prometheus (metrics database) http://<swarm-ip>:9090
grafana (visualize metrics) http://<swarm-ip>:3000
node-exporter (host metrics collector)
cadvisor (containers metrics collector)
dockerd-exporter (Docker daemon metrics collector, requires Docker experimental metrics-addr to be enabled)
alertmanager (alerts dispatcher) http://<swarm-ip>:9093
unsee (alert manager dashboard) http://<swarm-ip>:9094
caddy (reverse proxy and basic auth provider for prometheus, alertmanager and unsee)

Alternative install with Traefik and HTTPS

If you have a Docker Swarm cluster with a global Traefik set up as described in DockerSwarm.rocks, you can deploy Swarmprom integrated with that global Traefik proxy.

This way, each Swarmprom service will have its own domain, and each of them will be served using HTTPS, with certificates generated (and renewed) automatically.

Requisites

These instructions assume you already have Traefik set up following that guide above, in short:

With automatic HTTPS certificate generation.
A Docker Swarm network traefik-public.
Filtering to only serve containers with a tag traefik-public.

Instructions

Clone this repository and enter into the directory:

$ git clone https://github.com/stefanprodan/swarmprom.git
$ cd swarmprom

Set and export an ADMIN_USER environment variable:

export ADMIN_USER=admin

Set and export an ADMIN_PASSWORD environment variable:

export ADMIN_PASSWORD=changethis

Set and export a hashed version of the ADMIN_PASSWORD using openssl, it will be used by Traefik's HTTP Basic Auth for most of the services:

export HASHED_PASSWORD=$(openssl passwd -apr1 $ADMIN_PASSWORD)

You can check the contents with:

echo $HASHED_PASSWORD

it will look like:

$apr1$89eqM5Ro$CxaFELthUKV21DpI3UTQO.

Create and export an environment variable DOMAIN, e.g.:

export DOMAIN=example.com

and make sure that the following sub-domains point to your Docker Swarm cluster IPs:

grafana.example.com
alertmanager.example.com
unsee.example.com
prometheus.example.com

(and replace example.com with your actual domain).

Note: You can also use a subdomain, like swarmprom.example.com. Just make sure that the subdomains point to (at least one of) your cluster IPs. Or set up a wildcard subdomain (*).

Set and export an environment variable with the tag used by Traefik public to filter services (by default, it's traefik-public):

export TRAEFIK_PUBLIC_TAG=traefik-public

If you are using Slack and want to integrate it, set the following environment variables:

export SLACK_URL=https://hooks.slack.com/services/TOKEN
export SLACK_CHANNEL=devops-alerts
export SLACK_USER=alertmanager

Note: by using export when declaring all the environment variables above, the next command will be able to use them.

Deploy the Traefik version of the stack:

docker stack deploy -c docker-compose.traefik.yml swarmprom

To test it, go to each URL:

https://grafana.example.com
https://alertmanager.example.com
https://unsee.example.com
https://prometheus.example.com

Setup Grafana

Navigate to http://<swarm-ip>:3000 and login with user admin password admin. You can change the credentials in the compose file or by supplying the ADMIN_USER and ADMIN_PASSWORD environment variables at stack deploy.

Swarmprom Grafana is preconfigured with two dashboards and Prometheus as the default data source:

Name: Prometheus
Type: Prometheus
Url: http://prometheus:9090
Access: proxy

After you login, click on the home drop down, in the left upper corner and you'll see the dashboards there.

Docker Swarm Nodes Dashboard

URL: http://<swarm-ip>:3000/dashboard/db/docker-swarm-nodes

This dashboard shows key metrics for monitoring the resource usage of your Swarm nodes and can be filtered by node ID:

Cluster up-time, number of nodes, number of CPUs, CPU idle gauge
System load average graph, CPU usage graph by node
Total memory, available memory gouge, total disk space and available storage gouge
Memory usage graph by node (used and cached)
I/O usage graph (read and write Bps)
IOPS usage (read and write operation per second) and CPU IOWait
Running containers graph by Swarm service and node
Network usage graph (inbound Bps, outbound Bps)
Nodes list (instance, node ID, node name)

Docker Swarm Services Dashboard

URL: http://<swarm-ip>:3000/dashboard/db/docker-swarm-services

This dashboard shows key metrics for monitoring the resource usage of your Swarm stacks and services, can be filtered by node ID:

Number of nodes, stacks, services and running container
Swarm tasks graph by service name
Health check graph (total health checks and failed checks)
CPU usage graph by service and by container (top 10)
Memory usage graph by service and by container (top 10)
Network usage graph by service (received and transmitted)
Cluster network traffic and IOPS graphs
Docker engine container and network actions by node
Docker engine list (version, node id, OS, kernel, graph driver)

Prometheus Stats Dashboard

URL: http://<swarm-ip>:3000/dashboard/db/prometheus

Uptime, local storage memory chunks and series
CPU usage graph
Memory usage graph
Chunks to persist and persistence urgency graphs
Chunks ops and checkpoint duration graphs
Target scrapes, rule evaluation duration, samples ingested rate and scrape duration graphs

Prometheus service discovery

In order to collect metrics from Swarm nodes you need to deploy the exporters on each server. Using global services you don't have to manually deploy the exporters. When you scale up your cluster, Swarm will launch a cAdvisor, node-exporter and dockerd-exporter instance on the newly created nodes. All you need is an automated way for Prometheus to reach these instances.

Running Prometheus on the same overlay network as the exporter services allows you to use the DNS service discovery. Using the exporters service name, you can configure DNS discovery:

scrape_configs:
  - job_name: 'node-exporter'
    dns_sd_configs:
    - names:
      - 'tasks.node-exporter'
      type: 'A'
      port: 9100
  - job_name: 'cadvisor'
    dns_sd_configs:
    - names:
      - 'tasks.cadvisor'
      type: 'A'
      port: 8080
  - job_name: 'dockerd-exporter'
    dns_sd_configs:
    - names:
      - 'tasks.dockerd-exporter'
      type: 'A'
      port: 9323

When Prometheus runs the DNS lookup, Docker Swarm will return a list of IPs for each task. Using these IPs, Prometheus will bypass the Swarm load-balancer and will be able to scrape each exporter instance.

The problem with this approach is that you will not be able to tell which exporter runs on which node. Your Swarm nodes' real IPs are different from the exporters IPs since exporters IPs are dynamically assigned by Docker and are part of the overlay network. Swarm doesn't provide any records for the tasks DNS, besides the overlay IP. If Swarm provides SRV records with the nodes hostname or IP, you can re-label the source and overwrite the overlay IP with the real IP.

In order to tell which host a node-exporter instance is running, I had to create a prom file inside the node-exporter containing the hostname and the Docker Swarm node ID.

When a node-exporter container starts node-meta.prom is generated with the following content:

"node_meta{node_id=\"$NODE_ID\", node_name=\"$NODE_NAME\"} 1"

The node ID value is supplied via {{.Node.ID}} and the node name is extracted from the /etc/hostname file that is mounted inside the node-exporter container.

  node-exporter:
    image: stefanprodan/swarmprom-node-exporter
    environment:
      - NODE_ID={{.Node.ID}}
    volumes:
      - /etc/hostname:/etc/nodename
    command:
      - '-collector.textfile.directory=/etc/node-exporter/'

Using the textfile command, you can instruct node-exporter to collect the node_meta metric. Now that you have a metric containing the Docker Swarm node ID and name, you can use it in promql queries.

Let's say you want to find the available memory on each node, normally you would write something like this:

sum(node_memory_MemAvailable) by (instance)

{instance="10.0.0.5:9100"} 889450496
{instance="10.0.0.13:9100"} 1404162048
{instance="10.0.0.15:9100"} 1406574592

The above result is not very helpful since you can't tell what Swarm node is behind the instance IP. So let's write that query taking into account the node_meta metric:

sum(node_memory_MemAvailable * on(instance) group_left(node_id, node_name) node_meta) by (node_id, node_name)

{node_id="wrdvtftteo0uaekmdq4dxrn14",node_name="swarm-manager-1"} 889450496
{node_id="moggm3uaq8tax9ptr1if89pi7",node_name="swarm-worker-1"} 1404162048
{node_id="vkdfx99mm5u4xl2drqhnwtnsv",node_name="swarm-worker-2"} 1406574592

This is much better. Instead of overlay IPs, now I can see the actual Docker Swarm nodes ID and hostname. Knowing the hostname of your nodes is useful for alerting as well.

You can define an alert when available memory reaches 10%. You also will receive the hostname in the alert message and not some overlay IP that you can't correlate to a infrastructure item.

Maybe you are wondering why you need the node ID if you have the hostname. The node ID will help you match node-exporter instances to cAdvisor instances. All metrics exported by cAdvisor have a label named container_label_com_docker_swarm_node_id, and this label can be used to filter containers metrics by Swarm nodes.

Let's write a query to find out how many containers are running on a Swarm node. Knowing from the node_meta metric all the nodes IDs you can define a filter with them in Grafana. Assuming the filter is $node_id the container count query should look like this:

count(rate(container_last_seen{container_label_com_docker_swarm_node_id=~"$node_id"}[5m]))

Another use case for node ID is filtering the metrics provided by the Docker engine daemon. Docker engine doesn't have a label with the node ID attached on every metric, but there is a swarm_node_info metric that has this label. If you want to find out the number of failed health checks on a Swarm node you would write a query like this:

sum(engine_daemon_health_checks_failed_total) * on(instance) group_left(node_id) swarm_node_info{node_id=~"$node_id"})

For now the engine metrics are still experimental. If you want to use dockerd-exporter you have to enable the experimental feature and set the metrics address to 0.0.0.0:9323.

If you are running Docker with systemd create or edit /etc/systemd/system/docker.service.d/docker.conf file like so:

[Service]
ExecStart=
ExecStart=/usr/bin/dockerd \
  --storage-driver=overlay2 \
  --dns 8.8.4.4 --dns 8.8.8.8 \
  --experimental=true \
  --metrics-addr 0.0.0.0:9323

Apply the config changes with systemctl daemon-reload && systemctl restart docker and check if the docker_gwbridge ip address is 172.18.0.1:

ip -o addr show docker_gwbridge

Replace 172.18.0.1 with your docker_gwbridge address in the compose file:

  dockerd-exporter:
    image: stefanprodan/caddy
    environment:
      - DOCKER_GWBRIDGE_IP=172.18.0.1

Collecting Docker Swarm metrics with Prometheus is not a smooth process, and because of group_left queries tend to become more complex. In the future I hope Swarm DNS will contain the SRV record for hostname and Docker engine metrics will expose container metrics replacing cAdvisor all together.

Configure Prometheus

I've set the Prometheus retention period to 24h, you can change these values in the compose file or using the env variable PROMETHEUS_RETENTION.

  prometheus:
    image: stefanprodan/swarmprom-prometheus
    command:
      - '-storage.tsdb.retention=24h'
    deploy:
      resources:
        limits:
          memory: 2048M
        reservations:
          memory: 1024M

When using host volumes you should ensure that Prometheus doesn't get scheduled on different nodes. You can pin the Prometheus service on a specific host with placement constraints.

  prometheus:
    image: stefanprodan/swarmprom-prometheus
    volumes:
      - prometheus:/prometheus
    deploy:
      mode: replicated
      replicas: 1
      placement:
        constraints:
          - node.labels.monitoring.role == prometheus

Configure alerting

The Prometheus swarmprom comes with the following alert rules:

Swarm Node CPU Usage

Alerts when a node CPU usage goes over 80% for five minutes.

ALERT node_cpu_usage
  IF 100 - (avg(irate(node_cpu{mode="idle"}[1m])  * on(instance) group_left(node_name) node_meta * 100) by (node_name)) > 80
  FOR 5m
  LABELS      { severity="warning" }
  ANNOTATIONS {
      summary = "CPU alert for Swarm node '{{ $labels.node_name }}'",
      description = "Swarm node {{ $labels.node_name }} CPU usage is at {{ humanize $value}}%.",
  }

Swarm Node Memory Alert

Alerts when a node memory usage goes over 80% for five minutes.

ALERT node_memory_usage
  IF sum(((node_memory_MemTotal - node_memory_MemAvailable) / node_memory_MemTotal) * on(instance) group_left(node_name) node_meta * 100) by (node_name) > 80
  FOR 5m
  LABELS      { severity="warning" }
  ANNOTATIONS {
      summary = "Memory alert for Swarm node '{{ $labels.node_name }}'",
      description = "Swarm node {{ $labels.node_name }} memory usage is at {{ humanize $value}}%.",
  }

Swarm Node Disk Alert

Alerts when a node storage usage goes over 85% for five minutes.

ALERT node_disk_usage
  IF ((node_filesystem_size{mountpoint="/rootfs"} - node_filesystem_free{mountpoint="/rootfs"}) * 100 / node_filesystem_size{mountpoint="/rootfs"}) * on(instance) group_left(node_name) node_meta > 85
  FOR 5m
  LABELS      { severity="warning" }
  ANNOTATIONS {
      summary = "Disk alert for Swarm node '{{ $labels.node_name }}'",
      description = "Swarm node {{ $labels.node_name }} disk usage is at {{ humanize $value}}%.",
  }

Swarm Node Disk Fill Rate Alert

Alerts when a node storage is going to remain out of free space in six hours.

ALERT node_disk_fill_rate_6h
  IF predict_linear(node_filesystem_free{mountpoint="/rootfs"}[1h], 6*3600) * on(instance) group_left(node_name) node_meta < 0
  FOR 1h
  LABELS      { severity="critical" }
  ANNOTATIONS {
      summary = "Disk fill alert for Swarm node '{{ $labels.node_name }}'",
      description = "Swarm node {{ $labels.node_name }} disk is going to fill up in 6h.",
  }

You can add alerts to swarm_node and swarm_task files and rerun stack deploy to update them. Because these files are mounted inside the Prometheus container at run time as Docker configs you don't have to bundle them with the image.

The Alertmanager swarmprom image is configured with the Slack receiver. In order to receive alerts on Slack you have to provide the Slack API url, username and channel via environment variables:

  alertmanager:
    image: stefanprodan/swarmprom-alertmanager
    environment:
      - SLACK_URL=${SLACK_URL}
      - SLACK_CHANNEL=${SLACK_CHANNEL}
      - SLACK_USER=${SLACK_USER}

You can install the stress package with apt and test out the CPU alert, you should receive something like this:

Cloudflare has made a great dashboard for managing alerts. Unsee can aggregate alerts from multiple Alertmanager instances, running either in HA mode or separate. You can access unsee at http://<swarm-ip>:9094 using the admin user/password set via compose up:

Monitoring applications and backend services

You can extend swarmprom with special-purpose exporters for services like MongoDB, PostgreSQL, Kafka, Redis and also instrument your own applications using the Prometheus client libraries.

In order to scrape other services you need to attach those to the mon_net network so Prometheus can reach them. Or you can attach the mon_prometheus service to the networks where your services are running.

Once your services are reachable by Prometheus you can add the dns name and port of those services to the Prometheus config using the JOBS environment variable:

  prometheus:
    image: stefanprodan/swarmprom-prometheus
    environment:
      - JOBS=mongo-exporter:9216 kafka-exporter:9216 redis-exporter:9216

Monitoring production systems

The swarmprom project is meant as a starting point in developing your own monitoring solution. Before running this in production you should consider building and publishing your own Prometheus, node exporter and alert manager images. Docker Swarm doesn't play well with locally built images, the first step would be to setup a secure Docker registry that your Swarm has access to and push the images there. Your CI system should assign version tags to each image. Don't rely on the latest tag for continuous deployments, Prometheus will soon reach v2 and the data store will not be backwards compatible with v1.x.

Another thing you should consider is having redundancy for Prometheus and alert manager. You could run them as a service with two replicas pinned on different nodes, or even better, use a service like Weave Cloud Cortex to ship your metrics outside of your current setup. You can use Weave Cloud not only as a backup of your metrics database but you can also define alerts and use it as a data source for your Grafana dashboards. Having the alerting and monitoring system hosted on a different platform other than your production is good practice that will allow you to react quickly and efficiently when a major disaster strikes.

Swarmprom comes with built-in Weave Cloud integration, what you need to do is run the weave-compose stack with your Weave service token:

TOKEN=<WEAVE-TOKEN> \
ADMIN_USER=admin \
ADMIN_PASSWORD=admin \
docker stack deploy -c weave-compose.yml mon

This will deploy Weave Scope and Prometheus with Weave Cortex as remote write. The local retention is set to 24h so even if your internet connection drops you'll not lose data as Prometheus will retry pushing data to Weave Cloud when the connection is up again.

You can define alerts and notifications routes in Weave Cloud in the same way you would do with alert manager.

To use Grafana with Weave Cloud you have to reconfigure the Prometheus data source like this:

Name: Prometheus
Type: Prometheus
Url: https://cloud.weave.works/api/prom
Access: proxy
Basic auth: use your service token as password, the user value is ignored

Weave Scope automatically generates a map of your application, enabling you to intuitively understand, monitor, and control your microservices based application. You can view metrics, tags and metadata of the running processes, containers and hosts. Scope offers remote access to the Swarm’s nods and containers, making it easy to diagnose issues in real-time.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Repository files navigation

swarmprom

Install

Alternative install with Traefik and HTTPS

Requisites

Instructions

Setup Grafana

Prometheus service discovery

Configure Prometheus

Configure alerting

Monitoring applications and backend services

Monitoring production systems

About

Uh oh!

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 189 Commits
alertmanager		alertmanager
caddy		caddy
dockerd-exporter		dockerd-exporter
grafana		grafana
node-exporter		node-exporter
prometheus		prometheus
.gitattributes		.gitattributes
.gitignore		.gitignore
.travis.yml		.travis.yml
LICENSE		LICENSE
README.md		README.md
docker-compose.traefik.yml		docker-compose.traefik.yml
docker-compose.yml		docker-compose.yml
test-compose.yml		test-compose.yml
weave-compose.yml		weave-compose.yml

License

Latest commit

History

Repository files navigation

swarmprom

Install

Alternative install with Traefik and HTTPS

Requisites

Instructions

Setup Grafana

Prometheus service discovery

Configure Prometheus

Configure alerting

Monitoring applications and backend services

Monitoring production systems

Uh oh!