8000 Shutdown Button not working on Pi5 and NuclearFission · Issue #28 · RotorHazard/RH_Install-Manager · GitHub
[go: up one dir, main page]
More Web Proxy on the site http://driver.im/
Skip to content

Shutdown Button not working on Pi5 and NuclearFission #28

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom
Open
SentinelFour opened this issue Apr 12, 2025 · 17 comments
Open

Shutdown Button not working on Pi5 and NuclearFission #28

SentinelFour opened this issue Apr 12, 2025 · 17 comments

Comments

@SentinelFour
Copy link

Hi,

as per the title , the shutdown button is not working. It's a NuclearFission with a Pi5.

  • I installed everything via RHIM -> button was not working.
  • I installed everything using the NuclearQuads install script -> button does work.
  • Then I installed everything once again via RHIM -> buton not working.

And for the port forwarding issue which I encountered as well, I see that a different issue was already opened. :)

Thank you!
@szafranski
Copy link
Collaborator

thanks for reporting, will investigate soon

@szafranski
Copy link
Collaborator

port forwarding fixed. will investigate the button issue

@SentinelFour
Copy link
Author

Thanks a lot! Awesome. :)
Thought about following up here today but thought you will look at it whenever you find the time. Intended to test the latest beta today and RHIM is just the most convenient way to update.

I would assume that the config file is not populated correctly for the raspi5. That it is not related to the NH fission.
I'm no expert but if I am not mistaken something was missing in the config when I compared it to the one that exists after the NH script installation.

@szafranski
Copy link
Collaborator
szafranski commented Apr 25, 2025 via email

@SentinelFour
Copy link
Author

The issue is that in the pi5 the shutdown button does not work. No beeps and the system is not shut down.

I saw that the latest beta is supported, but I wanted to wait until the port forwarding and shutdown button issues have been fixed, too.
Thanks to you, port forwarding is already working. :) now I would only wait for the shutdown button.

@szafranski
Copy link
Collaborator

Oh, sure. :) Now I understand. Could you kindly provide the link to the config that works?

@SentinelFour
Copy link
Author

Sure. The script provided on this page. https://nuclearquads.github.io/instructions/kitinstructions.html

 this command, which will download and run this script 
curl -s https://nuclearquads.github.io/files/nhpisetup.sh | bash -s nuclearwifi

I can also try to upload the file from the tracker tomorrow, if that helps.

On another note, just donated a little. Thanks for all your efforts!

@szafranski
Copy link
Collaborator

So I just perform a fresh install and button works as expected. Are you sure you used NuclearHazard version?

Image

@SentinelFour
Copy link
Author
SentinelFour commented Apr 26, 2025 •
edited
Loading

I did not use the quick install but used the "standard" or manual worflow. Is it mandatory to use the quick install if I use the NH? I thought that this would be optional.

@szafranski
Copy link
Collaborator
szafranski commented Apr 26, 2025 via email

@szafranski
Copy link
Collaborator

Ok, so I perform some testing. I did a manual configuration and it works for me with one of a kits. Could you kindly provide the screen of your config file? I can assist to obtain it if needed.

@SentinelFour
Copy link
Author

Interesting. So does this mean the shutdown button was setup properly following the standard workflow (and I did something wrong) or did you manually fix the config file afterwards?

@szafranski
Copy link
Collaborator
szafranski commented Apr 27, 2025 via email

@SentinelFour
Copy link
Author
SentinelFour commented Apr 27, 2025 •
edited
Loading

I see I see. Many thanks. I think that I know what to look for now.

Just wondering. I have another NuclearHazard and that one runs on a Pi4. I (of course :-) ) also used your installer to set up that one and using the "standard" workflow, the shutdown button works fine. So is the GPIO 18 -> GPIO 19 only a special case for the Pi5 in combination with NuclearHazard hardware?

@szafranski
Copy link
Collaborator
szafranski commented Apr 27, 2025 via email

@SentinelFour
Copy link
Author
SentinelFour commented Apr 27, 2025 •
edited
Loading

Thanks! If you want to debug, I am happy to help and provide what's necessary.
Otherwise, from my side, I know now what to do and will install the software again, either manual with setting the correct GPIO pin or just using the quick installation. :)

The question might pop up more often potentially in the future. Not sure how many NH users are using your script and then the manual path though.

Thanks again for all your time and efforts.

@SentinelFour
Copy link
Author
SentinelFour commented Apr 27, 2025 •
edited
Loading

To add: The beta introduced under settings an advanced menu. Just figured that there is now the option to change the GPIO Pin without the need to edit the config file. Thanks to your previous info, I knew what to set it to.

Image

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@szafranski @SentinelFour
0