rustup: the Rust toolchain installer

CI	Build Status
Travis
AppVeyor

rustup installs The Rust Programming Language from the official release channels, enabling you to easily switch between stable, beta, and nightly compilers and keep them updated. It makes cross-compiling simpler with binary builds of the standard library for common platforms. And it runs on all platforms Rust supports, including Windows.

Installation
How rustup works
Keeping Rust up to date
Working with nightly Rust
Toolchain specification
Toolchain override shorthand
Directory overrides
The toolchain file
Override precedence
Cross-compilation
Working with Rust on Windows
Working with custom toolchains
Working with network proxies
Examples
Environment variables
Other installation methods
Security
FAQ
License
Contributing

Installation

Follow the instructions at https://rustup.rs. If that doesn't work for you there are other installation methods.

rustup installs rustc, cargo, rustup and other standard tools to Cargo's bin directory. On Unix it is located at $HOME/.cargo/bin and on Windows at %USERPROFILE%\.cargo\bin. This is the same directory that cargo install will install Rust programs and Cargo plugins.

This directory will be in your $PATH environment variable, which means you can run them from the shell without further configuration. Open a new shell and type the following:

rustc --version

If you see something like rustc 1.19.0 (0ade33941 2017-07-17) then you are ready to Rust. If you decide Rust isn't your thing, you can completely remove it from your system by running rustup self uninstall.

Enable tab completion for Bash, Fish, Zsh, or PowerShell

rustup now supports generating completion scripts for Bash, Fish, Zsh, and PowerShell. See rustup help completions for full details, but the gist is as simple as using one of the following:

# Bash
$ rustup completions bash > ~/.local/share/bash-completion/completions/rustup

# Bash (macOS/Homebrew)
$ rustup completions bash > $(brew --prefix)/etc/bash_completion.d/rustup.bash-completion

# Fish
$ mkdir -p ~/.config/fish/completions
$ rustup completions fish > ~/.config/fish/completions/rustup.fish

# Zsh
$ rustup completions zsh > ~/.zfunc/_rustup

# PowerShell v5.0+
$ rustup completions powershell >> $PROFILE.CurrentUserCurrentHost
# or
$ rustup completions powershell | Out-String | Invoke-Expression

Note: you may need to restart your shell in order for the changes to take effect.

For zsh, you must then add the following line in your ~/.zshrc before compinit:

fpath+=~/.zfunc

Choosing where to install

rustup allows you to customise your installation by setting the environment variables CARGO_HOME and RUSTUP_HOME before running the rustup-init executable. As mentioned in the Environment Variables section, RUSTUP_HOME sets the root rustup folder, which is used for storing installed toolchains and configuration options. CARGO_HOME contains cache files used by cargo.

Note that you will need to ensure these environment variables are always set and that CARGO_HOME/bin is in the $PATH environment variable when using the toolchain.

How rustup works

rustup is a toolchain multiplexer. It installs and manages many Rust toolchains and presents them all through a single set of tools installed to ~/.cargo/bin. The rustc and cargo installed to ~/.cargo/bin are proxies that delegate to the real toolchain. rustup then provides mechanisms to easily change the active toolchain by reconfiguring the behavior of the proxies.

So when rustup is first installed running rustc will run the proxy in $HOME/.cargo/bin/rustc, which in turn will run the stable compiler. If you later change the default toolchain to nightly with rustup default nightly, then that same proxy will run the nightly compiler instead.

This is similar to Ruby's rbenv, Python's pyenv, or Node's nvm.

Keeping Rust up to date

Rust is distributed on three different release channels: stable, beta, and nightly. rustup is configured to use the stable channel by default, which represents the latest release of Rust, and is released every six weeks.

When a new version of Rust is released, you can type rustup update to update to it:

$ rustup update
info: syncing channel updates for 'stable'
info: downloading component 'rustc'
info: downloading component 'rust-std'
info: downloading component 'rust-docs'
info: downloading component 'cargo'
info: installing component 'rustc'
info: installing component 'rust-std'
info: installing component 'rust-docs'
info: installing component 'cargo'
info: checking for self-updates
info: downloading self-updates

  stable updated: rustc 1.7.0 (a5d1e7a59 2016-02-29)

This is the essence of rustup.

Keeping rustup up to date

Running rustup update also checks for updates to rustup and automatically installs the latest version. To manually check for updates and install the latest version of rustup without updating installed toolchains type rustup self update:

$ rustup self update
info: checking for self-updates
info: downloading self-updates

Note: rustup will automatically update itself at the end of any toolchain installation as well. You can prevent this automatic behaviour by passing the --no-self-update argument when running rustup update or rustup toolchain install.

Working with nightly Rust

rustup gives you easy access to the nightly compiler and its experimental features. To add it just run rustup toolchain install nightly:

$ rustup toolchain install nightly
info: syncing channel updates for 'nightly'
info: downloading toolchain manifest
info: downloading component 'rustc'
info: downloading component 'rust-std'
info: downloading component 'rust-docs'
info: downloading component 'cargo'
info: installing component 'rustc'
info: installing component 'rust-std'
info: installing component 'rust-docs'
info: installing component 'cargo'

  nightly installed: rustc 1.9.0-nightly (02310fd31 2016-03-19)

Now Rust nightly is installed, but not activated. To test it out you can run a command from the nightly toolchain like

$ rustup run nightly rustc --version
rustc 1.9.0-nightly (02310fd31 2016-03-19)

But more likely you want to use it for a while. To switch to nightly globally, change the default with rustup default nightly:

$ rustup default nightly
info: using existing install for 'nightly'
info: default toolchain set to 'nightly'

  nightly unchanged: rustc 1.9.0-nightly (02310fd31 2016-03-19)

Now any time you run cargo or rustc you will be running the nightly compiler.

With nightly installed any time you run rustup update, the nightly channel will be updated in addition to stable:

$ rustup update
info: syncing channel updates for 'stable'
info: syncing channel updates for 'nightly'
info: checking for self-updates
info: downloading self-updates

   stable unchanged: rustc 1.7.0 (a5d1e7a59 2016-02-29)
  nightly unchanged: rustc 1.9.0-nightly (02310fd31 2016-03-19)

A note about nightly stability: Nightly toolchains may fail to build, so for any given date and target platform there may not be a toolchain available. Furthermore, nightly builds may be published with missing non-default components (e.g. clippy). As such, it can be difficult to find fully-working nightlies. Use the rustup-components-history project to find the build status of recent nightly toolchains and components.

Toolchain specification

Many rustup commands deal with toolchains, a single installation of the Rust compiler. rustup supports multiple types of toolchains. The most basic track the official release channels: stable, beta and nightly; but rustup can also install toolchains from the official archives, for alternate host platforms, and from local builds.

Standard release channel toolchain names have the following form:

<channel>[-<date>][-<host>]

<channel>       = stable|beta|nightly|<version>
<date>          = YYYY-MM-DD
<host>          = <target-triple>

'channel' is either a named release channel or an explicit version number, such as '1.8.0'. Channel names can be optionally appended with an archive date, as in 'nightly-2014-12-18', in which case the toolchain is downloaded from the archive for that date.

Finally, the host may be specified as a target triple. This is most useful for installing a 32-bit compiler on a 64-bit platform, or for installing the MSVC-based toolchain on Windows. For example:

$ rustup toolchain install stable-x86_64-pc-windows-msvc

For convenience, elements of the target triple that are omitted will be inferred, so the above could be written:

$ rustup toolchain install stable-msvc

Toolchain names that don't name a channel instead can be used to name custom toolchains.

Toolchain override shorthand

The rustup toolchain proxies can be instructed directly to use a specific toolchain, a convenience for developers who often test different toolchains. If the first argument to cargo, rustc or other tools in the toolchain begins with +, it will be interpreted as a rustup toolchain name, and that toolchain will be preferred, as in

cargo +beta test

Directory overrides

Directories can be assigned their own Rust toolchain with rustup override. When a directory has an override then any time rustc or cargo is run inside that directory, or one of its child directories, the override toolchain will be invoked.

To use to a specific nightly for a directory:

rustup override set nightly-2014-12-18

Or a specific stable release:

rustup override set 1.0.0

To see the active toolchain use rustup show. To remove the override and use the default toolchain again, rustup override unset.

The toolchain file

rustup directory overrides are a local configuration, stored in $RUSTUP_HOME. Some projects though find themselves 'pinned' to a specific release of Rust and want this information reflected in their source repository. This is most often the case for nightly-only software that pins to a revision from the release archives.

In these cases the toolchain can be named in the project's directory in a file called rust-toolchain, the content of which is the name of a single rustup toolchain, and which is suitable to check in to source control.

The toolchains named in this file have a more restricted form than rustup toolchains generally, and may only contain the names of the three release channels, 'stable', 'beta', 'nightly', Rust version numbers, like '1.0.0', and optionally an archive date, like 'nightly-2017-01-01'. They may not name custom toolchains, nor host-specific toolchains.

Override precedence

There are several ways to specify which toolchain rustup should execute:

An explicit toolchain, e.g. cargo +beta,
The RUSTUP_TOOLCHAIN environment variable,
A directory override, ala rustup override set beta,
The rust-toolchain file,
The default toolchain,

and they are preferred by rustup in that order, with the explicit toolchain having highest precedence, and the default toolchain having the lowest. There is one exception though: directory overrides and the rust-toolchain file are also preferred by their proximity to the current directory. That is, these two override methods are discovered by walking up the directory tree toward the filesystem root, and a rust-toolchain file that is closer to the current directory will be preferred over a directory override that is further away.

To verify which toolchain is active use rustup show.

Cross-compilation

Rust supports a great number of platforms. For many of these platforms The Rust Project publishes binary releases of the standard library, and for some the full compiler. rustup gives easy access to all of them.

When you first install a toolchain, rustup installs only the standard library for your host platform - that is, the architecture and operating system you are presently running. To compile to other platforms you must install other target platforms. This is done with the rustup target add command. For example, to add the Android target:

$ rustup target add arm-linux-androideabi
info: downloading component 'rust-std' for 'arm-linux-androideabi'
info: installing component 'rust-std' for 'arm-linux-androideabi'

With the arm-linux-androideabi target installed you can then build for Android with Cargo by passing the --target flag, as in cargo build --target=arm-linux-androideabi.

Note that rustup target add only installs the Rust standard library for a given target. There are typically other tools necessary to cross-compile, particularly a linker. For example, to cross compile to Android the Android NDK must be installed. In the future, rustup will provide assistance installing the NDK components as well.

To install a target for a toolchain that isn't the default toolchain use the --toolchain argument of rustup target add, like so:

$ rustup target add --toolchain <toolchain> <target>...

To see a list of available targets, rustup target list. To remove a previously-added target, rustup target remove.

Working with Rust on Windows

rustup works the same on Windows as it does on Unix, but there are some special considerations for Rust developers on Windows. As mentioned on the Rust download page, there are two ABIs in use on Windows: the native (MSVC) ABI used by Visual Studio, and the GNU ABI used by the GCC toolchain. Which version of Rust you need depends largely on what C/C++ libraries you want to interoperate with: for interop with software produced by Visual Studio use the MSVC build of Rust; for interop with GNU software built using the MinGW/MSYS2 toolchain use the GNU build.

When targeting the MSVC ABI, Rust additionally requires an installation of Visual Studio 2013 (or later) or the Visual C++ Build Tools 2019 so rustc can use its linker. For Visual Studio, make sure to check the "C++ tools" option. No additional software installation is necessary for basic use of the GNU build.

By default rustup on Windows configures Rust to target the MSVC ABI, that is a target triple of either i686-pc-windows-msvc or x86_64-pc-windows-msvc depending on the CPU architecture of the host Windows OS. The toolchains that rustup chooses to install, unless told otherwise through the toolchain specification, will be compiled to run on that target triple host and will target that triple by default.

You can change this behavior with rustup set default-host or during installation.

For example, to explicitly select the 32-bit MSVC host:

$ rustup set default-host i686-pc-windows-msvc

Or to choose the 64 bit GNU toolchain:

$ rustup set default-host x86_64-pc-windows-gnu

Since the MSVC ABI provides the best interoperation with other Windows software it is recommended for most purposes. The GNU toolchain is always available, even if you don't use it by default. Just install it with rustup toolchain install:

$ rustup toolchain install stable-gnu

You don't need to switch toolchains to support all windows targets though; a single toolchain supports all four x86 windows targets:

$ rustup target add x86_64-pc-windows-msvc
$ rustup target add x86_64-pc-windows-gnu
$ rustup target add i686-pc-windows-msvc
$ rustup target add i686-pc-windows-gnu

Working with distribution Rust packages

Several Linux distributions package Rust, and you may wish to use the packaged toolchain, such as for distribution package development. You may also wish to use a rustup-managed toolchain such as nightly or beta. Normally, rustup will complain that you already have Rust installed in /usr and refuse to install. However, you can install Rust via rustup and have it coexist with your distribution's packaged Rust.

When you initially install Rust with rustup, pass the -y option to make it ignore the packaged Rust toolchain and install a rustup-managed toolchain into ~/.cargo/bin. Add that directory to your $PATH (or let rustup do it for you by not passing --no-modify-path). Then, to tell rustup about your system toolchain, run:

rustup toolchain link system /usr

You can then use +system as a rustup toolchain, just like +nightly; for instance, you can run cargo +system build to build with the system toolchain, or cargo +nightly build to build with nightly.

If you do distribution Rust development, you should likely make +system your default toolchain:

rustup default system

Working with custom toolchains and local builds

For convenience of developers working on Rust itself, rustup can manage local builds of the Rust toolchain. To teach rustup about your build, run:

$ rustup toolchain link my-toolchain path/to/my/toolchain/sysroot

For example, on Ubuntu you might clone rust-lang/rust into ~/rust, build it, and then run:

$ rustup toolchain link myrust ~/rust/build/x86_64-unknown-linux-gnu/stage2/
$ rustup default myrust

Now you can name my-toolchain as any other rustup toolchain. Create a rustup toolchain for each of your rust-lang/rust workspaces and test them easily with rustup run my-toolchain rustc.

Because the rust-lang/rust tree does not include Cargo, when cargo is invoked for a custom toolchain and it is not available, rustup will attempt to use cargo from one of the release channels, preferring 'nightly', then 'beta' or 'stable'.

Working with network proxies

Enterprise networks often don't have direct outside HTTP access, but enforce the use of proxies. If you're on such a network, you can request that rustup uses a proxy by setting its URL in the environment. In most cases, setting https_proxy should be sufficient. On a Unix-like system with a shell like bash or zsh, you could use:

export https_proxy=socks5://proxy.example.com:1080 # or http://proxy.example.com:8080

On Windows, the command would be:

set https_proxy=socks5://proxy.example.com:1080

If you need a more complex setup, rustup supports the convention used by the curl program, documented in the ENVIRONMENT section of its manual page.

The use of curl is presently deprecated, however it can still be used by providing the RUSTUP_USE_CURL environment variable, for example:

RUSTUP_USE_CURL=1 rustup update

Note that some versions of libcurl apparently require you to drop the http:// or https:// prefix in environment variables. For example, export http_proxy=proxy.example.com:1080 (and likewise for HTTPS). If you are getting an SSL unknown protocol error from rustup via libcurl but the command-line curl command works fine, this may be the problem.

Examples

Command	Description
`rustup default nightly`	Set the default toolchain to the latest nightly
`rustup target list`	List all available targets for the active toolchain
`rustup target add arm-linux-androideabi`	Install the Android target
`rustup target remove arm-linux-androideabi`	Remove the Android target
`rustup run nightly rustc foo.rs`	Run the nightly regardless of the active toolchain
`rustc +nightly foo.rs`	Shorthand way to run a nightly compiler
`rustup run nightly bash`	Run a shell configured for the nightly compiler
`rustup default stable-msvc`	On Windows, use the MSVC toolchain instead of GNU
`rustup override set nightly-2015-04-01`	For the current directory, use a nightly from a specific date
`rustup toolchain link my-toolchain "C:\RustInstallation"`	Install a custom toolchain by symlinking an existing installation
`rustup show`	Show which toolchain will be used in the current directory
`rustup toolchain uninstall nightly`	Uninstall a given toolchain
`rustup toolchain help`	Show the `help` page for a subcommand (like `toolchain`)
`rustup man cargo`	(Unix only) View the man page for a given command (like `cargo`)

Environment variables

RUSTUP_HOME (default: ~/.rustup or %USERPROFILE%/.rustup) Sets the root rustup folder, used for storing installed toolchains and configuration options.
RUSTUP_TOOLCHAIN (default: none) If set, will override the toolchain used for all rust tool invocations. A toolchain with this name should be installed, or invocations will fail.
RUSTUP_DIST_SERVER (default: https://static.rust-lang.org) Sets the root URL for downloading static resources related to Rust. You can change this to instead use a local mirror, or to test the binaries from the staging directory.
RUSTUP_DIST_ROOT (default: https://static.rust-lang.org/dist) Deprecated. Use RUSTUP_DIST_SERVER instead.
RUSTUP_UPDATE_ROOT (default https://static.rust-lang.org/rustup) Sets the root URL for downloading self-updates.
RUSTUP_IO_THREADS unstable (defaults to reported cpu count). Sets the number of threads to perform close IO in. Set to disabled to force single-threaded IO for troubleshooting, or an arbitrary number to override automatic detection.
RUSTUP_TRACE_DIR unstable (default: no tracing) Enables tracing and determines the directory that traces will be written too. Traces are of the form PID.trace. Traces can be read by the Catapult project tracing viewer.
RUSTUP_UNPACK_RAM unstable (default 400M, min 100M) Caps the amount of RAM rustup will use for IO tasks while unpacking.
RUSTUP_NO_BACKTRACE Disables backtraces on non-panic errors even when RUST_BACKTRACE is set.

Other installation methods

The primary installation method, as described at https://rustup.rs, differs by platform:

On Windows, download and run the rustup-init.exe built for i686-pc-windows-gnu target. In general, this is the build of rustup one should install on Windows. Despite being built against the GNU toolchain, the Windows build of rustup will install Rust for the MSVC toolchain if it detects that MSVC is installed. If you prefer to install GNU toolchains or x86_64 toolchains by default this can be modified at install time, either interactively or with the --default-host flag, or after installation via rustup set default-host.
On Unix, run curl https://sh.rustup.rs -sSf | sh in your shell. This downloads and runs rustup-init.sh, which in turn downloads and runs the correct version of the rustup-init executable for your platform.

rustup-init accepts arguments, which can be passed through the shell script. Some examples:

$ curl https://sh.rustup.rs -sSf | sh -s -- --help
$ curl https://sh.rustup.rs -sSf | sh -s -- --no-modify-path
$ curl https://sh.rustup.rs -sSf | sh -s -- --default-toolchain nightly
$ curl https://sh.rustup.rs -sSf | sh -s -- --default-toolchain none

If you prefer you can directly download rustup-init for the platform of your choice:

† MSVC builds of rustup additionally require an installation of Visual Studio 2019 or the Visual C++ Build Tools 2019. For Visual Studio, make sure to check the "C++ tools" option. No additional software installation is necessary for basic use of the GNU build.

You can fetch an older version from https://static.rust-lang.org/rustup/archive/{rustup-version}/{target-triple}/rustup-init[.exe]

To install from source just run cargo run --release. Note that currently rustup only builds on nightly Rust, and that after installation the rustup toolchains will supersede any pre-existing toolchains by prepending ~/.cargo/bin to the PATH environment variable.

Security

rustup is secure enough for the non-paranoid, but it still needs work. rustup performs all downloads over HTTPS, but does not yet validate signatures of downloads.

File modes on installation honor umask as of 1.18.4, use umask if very tight controls are desired.

FAQ

Is this an official Rust project?

Yes. rustup is an official Rust project. It is the recommended way to install Rust at https://www.rust-lang.org.

How is this related to multirust?

rustup is the successor to multirust. rustup began as multirust-rs, a rewrite of multirust from shell script to Rust, by Diggory Blake, and is now maintained by The Rust Project.

Can rustup download the Rust source code?

The Rust source can be obtained by running rustup component add rust-src. It will be downloaded to the <toolchain root>/lib/rustlib/src/rust directory of the current toolchain.

rustup fails with Windows error 32

If rustup fails with Windows error 32, it may be due to antivirus scanning in the background. Disable antivirus scanner and try again.

I get "error: could not remove 'rustup-bin' file: 'C:\Users\USER\.cargo\bin\rustup.exe'"

If rustup fails to self-update in this way it's usually because RLS is running (your editor is open and running RLS). The solution is to stop RLS (by closing your editor) and try again.

License

Copyright Diggory Blake, the Mozilla Corporation, and rustup contributors.

Licensed under either of

Apache License, Version 2.0, (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)

at your option.

Name		Name	Last commit message	Last commit date
Latest commit History 2,599 Commits
.github/ISSUE_TEMPLATE		.github/ISSUE_TEMPLATE
ci		ci
download		download
src		src
tests		tests
www		www
.gitattributes		.gitattributes
.gitignore		.gitignore
.travis.yml		.travis.yml
CHANGELOG.md		CHANGELOG.md
CONTRIBUTING.md		CONTRIBUTING.md
Cargo.lock		Cargo.lock
Cargo.toml		Cargo.toml
LICENSE-APACHE		LICENSE-APACHE
LICENSE-MIT		LICENSE-MIT
README.md		README.md
appveyor.yml		appveyor.yml
build.rs		build.rs
rustup-init.sh		rustup-init.sh

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Repository files navigation

rustup: the Rust toolchain installer

Installation

Enable tab completion for Bash, Fish, Zsh, or PowerShell

Choosing where to install

How rustup works

Keeping Rust up to date

Keeping rustup up to date

Working with nightly Rust

Toolchain specification

Toolchain override shorthand

Directory overrides

The toolchain file

Override precedence

Cross-compilation

Working with Rust on Windows

Working with distribution Rust packages

Working with custom toolchains and local builds

Working with network proxies

Examples

Environment variables

Other installation methods

Security

FAQ

Is this an official Rust project?

How is this related to multirust?

Can rustup download the Rust source code?

rustup fails with Windows error 32

I get "error: could not remove 'rustup-bin' file: 'C:\Users\USER\.cargo\bin\rustup.exe'"

License

About

Uh oh!

Releases

Packages

Uh oh!

Languages

Folders and files

Latest commit

History

Repository files navigation

rustup: the Rust toolchain installer

Installation

Enable tab completion for Bash, Fish, Zsh, or PowerShell

Choosing where to install

How rustup works

Keeping Rust up to date

Keeping rustup up to date

Working with nightly Rust

Toolchain specification

Toolchain override shorthand

Directory overrides

The toolchain file

Override precedence

Cross-compilation

Working with Rust on Windows

Working with distribution Rust packages

Working with custom toolchains and local builds

Working with network proxies

Examples

Environment variables

Other installation methods

Security

FAQ

Is this an official Rust project?

How is this related to multirust?

Can rustup download the Rust source code?

rustup fails with Windows error 32

I get "error: could not remove 'rustup-bin' file: 'C:\Users\USER\.cargo\bin\rustup.exe'"

License

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Uh oh!

Languages

Packages