- Removed BVTMonitor in the aim to streamline the build environment. (May write a BVTMonitor replacement in future)
- Removed COMPLEX source patches as a requirement, aims to stay true to a retail image.
- Default build target is FRE and XM3. CHk is currently not supported as it needs extra source patching 
- Source patches to ntos and rombld to allow bootable BIOS roms to be created and tested. BIOSPack is still included but not recommended to use.

- Sadly Windows XP is currently NOT SUPPORTED by Easy-Build.. When I tested (on a XP x86 SP3 fresh install,) I recieved errors with the cl.exe and c1.dll. Not sure why maybe I needed to install a few updates so this needs looking at.
- Unified 'easy-build-xinit.cmd' for both x86 and amd64
- Added early 'config' support, Now Settings on 'First run', 'CPXXUPD done' and DevKit IPs are stored in an 'easybuild.conf' (In theory it will automatically update any left over files, there may be issues as its in testing)
- Updated info displayed in 'easy-build-xinit.cmd'
- (Main focus for update) Added a 'Developer Kit' menu, this will allow users to interact with their Debug kits with basic activities for now.
- Added 'Yelo Neighborhood v11' as it is a feature for the Devkit menu
- 'xbConsole.cmd' is a pop-out cmd for Easy-Build DevKit Menu
- Added Work aorund fixes for SDK not building when loaded in FRE

Developer Kit Features so far:
*NOTE* This menu is VERY WIP and you may have a few issues, I will work on any that occur after this initial release. You understand the risks when modifying files on the Xbox HDD!

- Transfer files to and from the console
- Update the console with the 4400 XDK Launcher (Requires XDK Launcher of any kind already set up with xbdm.dll)
- Shortcut to install the 4400 XDK
- Pop-out console to run Xbox CLI tools (e.g xbmemdump.exe)
- Reboot the console from Easy-Build
- Launch a debugging session thanks to XBDM.dll and xbWatson.exe
- Launch Yelo Neigborhood for Functions that provides 

### 2022 Revisions started ###

- Added 'easy-build-xinit64' which will allow easy-build to start on x64 builds
- Added folders to some 'dirs' files as they are buildable (Mainly test tools)
- Added starter info on modifying Easy-Build
- XDKSetup4400.exe is now Buildable! (Some files were missing from the tree and have been included from XDK 3823)
- Modified Wiki
- Fixed issue with overwriting a saved BVT Address
- Fixed a few issues which would cause errors during BVT Test
- Re-Readded Updated VHD, the issue is not the VHD, notes on BVTMonitor Readme
- Added first test version of BVTMonitor, A tool to automatically Deploy your build Kernel to a Virtual BVT (XEMU) for testing.
- Added a premade 'skeleton' VHD for BVTMonitor.
- 2bl.img and remainder.img replaced with iND BIOS 5001 versions as this had better success in booting in XEMU when packed with our Kernel
- Added idw\biospack to %PATH%.
- Replaced 'rombld' sections of ntos\init\*\makefile.inc with BIOSpack to allow bios Images to be created during build.
- Allowed seperate EEPROM and BIOS images to be created for CHK and FRE ('Postbuild only')
- Added more Information to easy-build-xinit
- Removed CHK builds dependancy on building to 'objd', now builds to 'obj' to avoid errors 
- Some FREE .libs are used as wevhave no suitable CHK versions that don't cause unresolved externals
- Made Easy-Build backup old Makefile.def before applying the CHK compatible one.
- Fixed incorrect error logs being opened on CHK
- Fixed 'bldrldr.lib' error finally
- Moved rebuilding 'ntos\bootx' to Rombld section , will now attempt to rebuild if files are missing
- Fixed spelling error in EEPROM menu
- Updated link for the .vhd as it was down
- Added BIOSPack from the Barnabus Kernel leak as it allows building of a *working* BIOS ROM
- Added EEPROM Building options
- Better definitions for building Retai (XM3)
- Written from scratch a new script for copying Debugging Symbols
- Adjusted Main menu with a sub-menu for building ISOs
- Added a 'First Run' check.. so after the initial welcome screen, you won't see it again
- Allowed 'RETAIMXM3' to be defined through easybuild 'easybuild free XM3'
- Added Directory to be built for the tool KeyDump
- Added a line to ntos\bootx\bldr32\sources that seems present in barnabus but not in 4400 (ours)
- Set %COMPUTERNAME% to XBuilds as it affects part of the postbuild and possibly build.
- Tweaked Rom build section to use source built version.
- Fixed an issue with xcopybins on Windows 10 x86 *I think* 
- Added 'timeout.exe' from Windows Server 2003 because some versions of XP don't have 'timeout' (It's used in easybuild to make timed pauses)
- Fixed wrong folder being built when dealing with xpreldr32.bin error
- Linked in-testing SDK Build script to the menu. (Advanced users, see *XDK Building* below)
- Added *VERY* in-testing of building bios rom (Advanced users, has issues described in the Easy-Build main menu)
- Added checks to see if CPXXUPD has already been applied on making new profile
- Added note on Easy-Build-xinit.cmd menu about loading CHK builds
- Build chk is now supported
- Postbuild scripts now have 'basic' logs in the %_NT386TREE% folder
- Added copying 'HVS Launcher Test' files (not sure what this is)
- Added two more buildable directories in "private\sdktools\factory"
- Added 'xmakesamples.cmd' which builds the XDK Sample CD.
- Added a WIP script to set off the XDK build *see XDK below*
- Fixed %_BUILDVER% not being set on razzle-easybuild handover
- Changed menu colours (I may change back depending on feedback)
- Small update to some 'dirs' files that adds folders to the build process that can build successfully
- Separated easybuild.cmd (mainmenu) to public/tools/ 
- Added xcopybins.cmd (basic, needing love, has pauses to tell us what's going down)
- Actual easybuild.cmd shows correct Razzle Tool Path now, starts xcopybins.cmd as postbuild