List of EN standards

European Standards (abbreviated EN, from the German name Europäische Norm ("European Norm"))^[1]^[2] are technical standards drafted and maintained by CEN (European Committee for Standardization), CENELEC (European Committee for Electrotechnical Standardization) and ETSI (European Telecommunications Standards Institute).

EN 1–999

EN 1: Flued oil stoves with vaporizing burners
EN 2: Classification of fires
EN 3: Portable fire extinguishers
EN 14: Dimensions of bed blankets
EN 19: Industrial valves – Marking of metallic valves
EN 20: Wood preservatives.
EN 26: Gas-fired instantaneous water heaters for the production of domestic hot water
EN 40-1: Lighting columns - Part 1: Definitions and terms
EN 40-2: Lighting columns - Part 2: General requirements and dimensions
EN 40-3-1: Lighting columns - Part 3-1: Design and verification - Specification for characteristic loads
EN 40-3-2: Lighting columns - Part 3-2: Design and verification - Verification by testing
EN 40-3-3: Lighting columns - Part 3-3: Design and verification - Verification by calculation
EN 40-4: Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
EN 40-5: Lighting columns - Part 5: Requirements for steel lighting columns
EN 40-6: Lighting columns - Part 6: Requirements for aluminium lighting columns
EN 40-7: Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns
EN 54: Fire detection and fire alarm systems
EN 71: Safety of toys
EN 81: Safety of lifts
EN 115: Safety of escalators & Moving walks
EN 136: Respiratory protective devices - Full-face masks - Requirements, testing and marking
EN 166: Personal eye protection. Specifications
EN 196: Methods for testing cement (10 parts)
EN 197-1: Cement – Part 1 : Composition, specifications and conformity criteria for common cements
EN 197-2: Cement – Part 2 : Conformity evaluation
EN 206-1: Concrete – Part 1: Specification, performance, production and conformity
EN 207: Classification and specifications of filters and eye protection against laser
EN 208: Classification of eye protection filters for laser alignment
EN 228: Specifications for automotive petrol
EN 250: Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking
EN 280: Mobile elevating work platforms. Design calculations, Stability criteria, Construction, Safety Examinations and tests
EN 286: Simple unfired pressure vessels designed to contain air or nitrogen
- Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
- Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
EN 287: Qualification test of welders — Fusion welding
- Part 1: Steels
EN 294: Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs
EN 298: Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
EN 301 549: European standard for digital accessibility
EN 336: Structural timber — Sizes, permitted deviations
EN 338: Structural timber — Strength classes
EN 341: Personal protective equipment against falls from a height. Descender devices
EN 352-2: Revised 2002 standards on hearing protectors. Safety requirements and testing, generally about earplugs.
EN 353-1: Personal protective equipment against falls from a height. Guided type fall arresters including a rigid anchor
EN 353-2: Personal protective equipment against falls from a height. Guided type fall arresters including a flexible anchor line
EN 354: Personal protective equipment against falls from a height. Lanyards
EN 355: Personal protective equipment against falls from a height. Energy absorbers
EN 358: Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards
EN 360: Personal protective equipment against falls from a height. Retractable type fall arresters
EN 361: Personal protective equipment against falls from a height. Full body harnesses
EN 362: Personal protective equipment against falls from a height. Connectors
EN 363: Personal protective equipment against falls from a height. Fall arrest systems
EN 374: Protective gloves against chemicals and micro-organisms
EN 381: Protective clothing for chainsaw users, e.g. trousers, jackets, gloves, boots/gaiters.
EN 386: Glued laminated timber - Performance requirements and minimum production requirements
EN 388: Protective gloves against mechanical risks
EN 390: Glued laminated timber. Sizes. Permissible deviations
EN 391: Glued laminated timber - Delamination tests of glue lines
EN 392: Glued laminated timber - Shear test of glue lines
EN 397: Specification for industrial safety helmets
EN 403: Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking.
EN 408: Structural timber and glued laminated timber — Determination of some physical and mechanical properties
EN 417: Non-refillable metallic cartridges for liquefied petroleum gases
EN 420: Protective gloves. General requirements and test methods
EN 438: Decorative high-pressure laminates (HPL) sheets based on thermosetting resins.
EN 440: "Welding consumables wire electrodes and deposits for gas shielded metal arc welding of non-alloy and fine grain steel - Classification" (1994)
EN 450: Fly ash for concrete - Definitions, requirements and quality control
EN 474: Earth-moving Machinery. Safety. General Requirements
EN 518: Structural timber. Grading. Requirements for visual strength grading standards (replaced by EN 14081-1)
EN 519: Structural timber. Grading. Requirements for machine strength graded timber and grading machines (Replaced by EN 14081-1)
EN 567: Mountaineering equipment. Rope clamps. Safety requirements and test methods
EN 590: Specification for automotive diesel
EN 631: Containers for foodstuffs
EN 694: Fire-fighting hoses. Semi-rigid hoses for fixed systems
EN 716: Children's cots and folding cots for domestic use
EN 795: Protection against falls from a height. Anchor devices. Requirements and testing
EN 805: Water supply. Requirements for systems and components outside buildings
EN 813: Personal protective equipment for prevention of falls from a height. Sit harnesses
EN 837: Pressure connections
EN 840: Mobile waste containers.
EN 877: Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance
EN 926-1: Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength
EN 926-2: Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight safety characteristics
EN 933-1: Test for geometrical properties of aggregates - Part 1: determination of particle size distribution - Sieving method
EN 934-2: Admixtures for concrete, mortar and grout - Part 2: concrete admixtures - Definitions and requirements
EN 966: Helmets for airborne sports - used in paragliding, hang gliding and flying with ultra-light aeroplanes.
EN 980: Symbols for use in the labeling of medical devices

EN 1000–1989

EN 1010-1: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Common requirements
EN 1010-2: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Printing and varnishing machines including pre-press machinery
EN 1010-3: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Cutting machines
EN 1010-4: Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Bookbinding, paper converting and finishing machines
EN 1010-5: Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines. Machines for the production of corrugated board
EN 1069: Water slides of 2 m height and more
EN 1078: Helmets for pedal cyclists and for users of skateboards and roller skates
EN 1090: Execution of steel structures and aluminium structures (3 parts)
EN 1092: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated
EN 1168: Precast concrete products - Hollow core slabs
EN 1176-1: Playground equipment. General safety requirements and test methods
EN 1177: Impact absorbing playground surfacing. Safety requirements and test methods
EN 1325:2014: Value Management. Vocabulary. Terms and definitions
- EN 1325-1:1997 Value management, value analysis, functional analysis vocabulary. Value analysis and functional analysis (withdrawn, replaced by EN 1325:2014) ^[3]
EN 1337: Structural bearings
EN 1399: Resilient floor coverings. Determination of resistance to stubbed and burning cigarettes
EN 1401: Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U)
EN 1466: Child use and care articles - Carry cots and stands - Safety requirements and test methods
EN 1496: Personal fall protection equipment. Rescue lifting devices
EN 1679: Reciprocating internal combustion engines: Compression ignition engines
EN 1809: Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods.
EN 1815: Resilient and textile floor coverings. Assessment of static electrical propensity
EN 1846: Firefighting and rescue service vehicles
EN 1888-1: Child use and care articles - Wheeled child conveyances (Part 1: Pushchairs and prams—Up to 15 kg)
EN 1888-2: Child use and care articles - Wheeled child conveyances (Part 2: Pushchairs for children above 15 kg up to 22 kg)
EN 1891: Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes
EN 1972: Diving equipment - Snorkels - Requirements and test methods

EN 1990–1999 (Eurocodes)

EN 1990: (Eurocode 0) Basis of structural design
EN 1991: (Eurocode 1) Actions on structures
EN 1992: (Eurocode 2) Design of concrete structures
EN 1993: (Eurocode 3) Design of steel structures
EN 1994: (Eurocode 4) Design of composite steel and concrete structures
EN 1995: (Eurocode 5) Design of timber structures
EN 1996: (Eurocode 6) Design of masonry structures
EN 1997: (Eurocode 7) Geotechnical design
EN 1998: (Eurocode 8) Design of structures for earthquake resistance
EN 1999: (Eurocode 9) Design of aluminium structures

EN 10000–10999

This range includes almost exclusively CEN Standards related to iron and steel.

EN 10002: Metallic Materials - Tensile Testing
- EN 10002-1: Method of Test at Ambient Temperature
- EN 10002-5: Method of testing at elevated temperatures
EN 10024: Hot rolled taper flange I sections. Tolerances on shape and dimensions
EN 10025: Hot rolled products of structural steels
- EN 10025-1: Part 1: General technical delivery conditions
- EN 10025-2: Part 2: Technical delivery conditions for non-alloy structural steels
- EN 10025-3: Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
- EN 10025-4: Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
- EN 10025-5: Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
- EN 10025-6:Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10027: Designation systems for steel.^[4]
- EN 10088-1 Stainless steels - Part 1: List of stainless steels
- EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
- EN 10088-3 Stainless steels - Part 3: Stainless steels - Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes;
EN 10149: Hot rolled flat products made of high yield strength steels for cold forming.
- EN 10149-1: General technical delivery conditions
- EN 10149-2: Technical delivery conditions for thermomechanically rolled steels
- EN 10149-3: Technical delivery conditions for normalized or normalized rolled steels
EN 10204: Metallic products - Types of inspection documents
EN 10216: Seamless steel tubes for pressure purposes
- EN 10216-1: Part 1: Non-alloy steel tubes with specified room temperature properties
- EN 10216-2: Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties
- EN 10216-3: Part 3: Alloy fine grain steel tubes
- EN 10216-4: Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
- EN 10216-5: Part 5: Stainless steel tubes
EN 10217: Welded steel tubes for pressure purposes
- EN 10217-1: Part 1: Non-alloy steel tubes with specified room temperature properties
- EN 10217-2: Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
- EN 10217-3: Part 3: Alloy fine grain steel tubes
- EN 10217-4: Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
EN 10220: Seamless and welded steel tubes — Dimensions and masses per unit length
EN 10240: Internal and/or external protective coating for steel tubes - specification for hot dip galvanized coatings applied in automatic plants
EN 10270-1: Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire
EN 10270-2: Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire
EN 10305: Steel tubes for precision applications — Technical delivery conditions
- Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
- Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems

EN 12080, Railway applications — Axleboxes — Rolling bearings

EN 10357: Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
EN 10365: Hot rolled steel channels, I and H sections. Dimensions and masses

EN 11000–19999

EN 12102: Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
EN 12103: Resilient floor coverings - Agglomerated cork underlays - specification
EN 12104: Resilient floor coverings - Cork floor tiles - Specification
EN 12105: Resilient floor coverings - Determination of moisture content of agglomerated composition cork
EN 12199: Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
EN 12221: Changing units for domestic use
EN 12246: Quality classification of timber used in pallets and packaging
EN 12255: Wastewater treatment plants
- EN 12255-1: Part 1: General construction principles
- EN 12255-2: Part 2: Performance requirements of raw wastewater pumping installations
- EN 12255-3: Part 3: Preliminary treatment
- EN 12255-4: Part 4: Primary settlement
- EN 12255-5: Part 5: Lagooning processes
- EN 12255-6: Part 6: Activated sludge process
- EN 12255-7: Part 7: Biological fixed-film reactors
- EN 12255-8: Part 8: Sludge treatment and storage
- EN 12255-9: Part 9: Odour control and ventilation
- EN 12255-10: Part 10: Safety principles
- EN 12255-11: Part 11: General data required
- EN 12255-12: Part 12: Control and automation
- EN 12255-13: Part 13: Chemical treatment - Treatment of wastewater by precipitation/flocculation
- EN 12255-14: Part 14: Disinfection
- EN 12255-15: Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants
- EN 12255-16: Part 16: Physical (mechanical) filtration
EN 12277: Mountaineering and climbing harnesses
EN 12281: Printing and business paper. Requirements for copy paper.
EN 12345: Welding. Multilingual terms for welded joints with illustrations
EN 12492: Helmets for mountaineering
EN 12566: Small wastewater treatment systems for up to 50 PT
- EN 12566-1: Part 1: Prefabricated septic tanks
- EN 12566-2: Part 2: Soil infiltration systems
- EN 12566-3: Part 3: Packaged and/or site assembled domestic wastewater treatment plants
- EN 12566-4: Part 4: Septic tanks assembled in situ from prefabricated kits
- EN 12566-5: Part 5: Pretreated Effluent Filtration systems
- EN 12566-6: Part 6: Prefabricated treatment units for septic tank effluent
- EN 12566-7: Part 7: Prefabricated tertiary treatment units
EN 12572: Artificial climbing structures
EN 12600: Classification of Resistance of Glazing to Impact
EN 12663: Railway applications - Structural requirements of railway vehicle bodies
- Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
- Part 2: Freight wagons
EN 12797: Brazing – Destructive tests of brazed joints
EN 12799: Brazing – Non-destructive examination brazed joints
EN 12810: Facade scaffolds made of prefabricated parts
EN 12811: Temporary works equipment
EN 12841: Personal fall protection equipment. Rope access systems. Rope adjustment devices
BS EN 12845:2015+A1:2019 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance, as amended 2019 ^[5]
EN 12890: Patterns, pattern equipment and coreboxes for the production of sand molds and sand cores
EN 12896: Public Transport Reference Data Model
EN 12952: Water-Tube Boilers and Auxiliary Installations
EN 12973: Value Management
EN 12975-1: Thermal solar systems and components - Solar collectors
EN 13000: Cranes - Mobile Cranes
EN 13103: Railway applications — Wheelsets and bogies — Non-powered axles — Design method
EN 13104: Railway applications — Wheelsets and bogies — Powered axles — Design method
EN 13133: "Brazing - Brazer approval" (2000)
EN 13145: Railway applications - Track - Wood sleepers and bearers
EN 13146: Railway applications - Track - Test methods for fastening systems
- EN 13146-1: Part 1: Determination of longitudinal rail restraint
- EN 13146-2: Part 2: Determination of torsional resistance
- EN 13146-3: Part 3: Determination of attenuation of impact loads
- EN 13146-4: Part 4: Effect of repeated loading
- EN 13146-5: Part 5: Determination of electrical resistance
- EN 13146-6: Part 6: Effect of severe environmental conditions
- EN 13146-7: Part 7: Determination of clamping force
- EN 13146-8: Part 8: In service testing
- EN 13146-9: Part 9: Determination of stiffness
EN 13162:2013-03: Thermal insulation products for buildings - Factory made mineral wool (MW) products
EN 13204: Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements^[6]
EN 13231: Railway applications - Track - Acceptance of works
- EN 13231-1: Part 1: Works on ballasted track - Plain line, switches and crossings
- EN 13231-2: Part 2: Acceptance of reprofiling rails in plain line, switches, crossings, and expansion devices
- EN 13231-3: withdrawn, replaced by EN 13231-2
- EN 13231-4: withdrawn, replaced by EN 13231-2
- EN 13231-5: Part 5: Procedures for rail reprofiling in plain line, switches, crossings, and expansion devices
EN 13260: Railway applications — Wheelsets and bogies — Wheelsets — Product requirements
EN 13261: Railway applications — Wheelsets and bogies — Axles — Product requirements
EN 13262: Railway applications — Wheelsets and bogies — Wheels — Product requirements
EN 13300: quality and classification of (interior) wall paint
EN 13309: Construction machinery - Electromagnetic compatibility of machines with internal power supply
EN 13319: Diving accessories. Depth gauges and combined depth and time measuring devices. Functional and safety requirements, test methods.
EN 13402: Size designation of clothes
EN 13432: Compostable and biodegradable packaging
EN 13445: Unfired pressure vessels
EN 13480: Metallic industrial piping
EN 13501: Fire classification of construction products and building elements
EN 13537: Temperature ratings for sleeping bags
EN 13594:2002: Protective gloves for professional motorcycle riders. Requirements and test methods
EN 13595-1:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. General requirements
EN 13595-2:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of impact abrasion resistance
EN 13595-3:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of burst strength.
EN 13595-4:2002: Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test methods for the determination of impact cut resistance
EN 13612: Performance evaluation of in-vitro diagnostic devices
EN 13634: Protective footwear for professional motorcycle riders. Requirements and test methods
EN 13640: Stability testing of in vitro diagnostic reagents
- EN 13749 Railway applications — Wheelsets and bogies — Method of specifying the structural requirements of bogie frames
EN 13757: Communication system for meters and remote reading of meters (Meter-Bus)
EN 13803: Railway applications - Track - Track alignment design parameters - Track gauges 1435 mm and wider
EN 13940:2016: System of concepts to support continuity of care
EN 13979: Railway applications — Wheelsets and bogies — Monobloc wheels — Technical approval procedure
- Part 1: Forged and rolled wheels
EN ISO 13982: Protective clothing for use against solid particulates
- Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
EN 14033: Railway applications — Track — Railbound construction and maintenance machines
- Part 1: Technical requirements for running
- Part 2: Technical requirements for travelling and working
- Part 3: General safety requirements
EN 14067: Railway applications — Aerodynamics
- Part 1: Symbols and units
- Part 3: Aerodynamics in tunnels
- Part 4: Requirements and test procedures for aerodynamics on open track
- Part 5: Requirements and test procedures for aerodynamics in tunnels
- Part 6: Requirements and test procedures for cross wind assessment
EN 14081: Timber structures - Strength graded structural timber with rectangular cross section
- Part 1: General requirements
- Part 2: Machine grading - additional requirements for initial type testing.
- Part 3: Machine grading - additional requirements for factory production control.
- Part 4: Machine grading - grading machine settings for machine controlled systems.
EN 14214: The pure biodiesel standard
EN 14225-1: Diving suits. Wet suits. Requirements and test methods.
EN 14225-2: Diving suits. Dry suits. Requirements and test methods.
EN 14363: Railway applications — Testing and Simulation for the acceptance of running characteristics of railway vehicles — Running Behaviour and stationary tests
EN 14450:2018 Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets
EN 14511: Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling
EN 14531: Railway applications — Methods for calculation of stopping and slowing distances and immobilization braking
- Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles
- Part 2: Step by step calculations for train sets or single vehicles
EN 14535: Railway applications — Brake discs for railway rolling stock
- Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
- Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
EN 14601: Railway applications — Straight and angled end cocks for brake pipe and main reservoir pipe
EN 14904: Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification
EN 14988: Children's High chairs
- Part 1: Safety requirements
- Part 2: Test methods
EN 15152: Railway applications — Front windscreens for train cabs
EN 15153: Railway applications — External visible and audible warning devices
- Part 1: Head, marker and tail lamps
- Part 2: Warning horns
EN 15179: Railway applications — Braking — Requirements for the brake system of coaches
EN 15220: Railway applications — Brake indicators
EN 15227: Railway applications — Crashworthiness requirements for railway vehicle bodies
EN 15251: Indoor environmental input parameters for design and assessment of energy performance of buildings- addressing indoor air quality, thermal environment, lighting and acoustics
EN 15273: Railway applications - Gauges
- Part 1: General - Common rules for infrastructure and rolling stock
- Part 2: Rolling stock gauge
- Part 3: Structure gauges
EN 15313: Railway applications — In-service wheelset operation requirements — In-service and off-vehicle wheelset maintenance
EN 15329: Railway applications — Braking — Brake block holder and brake shoe key for railway vehicles
EN 15355: Railway applications — Braking — Distributor valves and distributor-isolating devices
EN 15427 Railway applications - Wheel/Rail friction management
- Part 1-1: Equipment and Application – Flange lubrication
- Part 1-2: Equipment and Application – Top of Rail materials
- Part 1-3: Equipment and Application – Adhesion materials
- Part 2-1: Properties and Characteristics – Flange lubricants
- Part 2-2: Properties and Characteristics – Top of Rail materials
- Part 2-3: Properties and Characteristics – Adhesion materials
EN 15437: Railway applications — Axlebox condition monitoring — Interface and design requirements
- Part 1: Track side equipment and rolling stock axlebox
EN 15528: Railway applications — Line categories for managing the interface between load limits of vehicles and infrastructure
EN 15531: Service Interface for Real Time Information
EN 15551: Railway applications — Railway rolling stock — Buffers
EN 15566: Railway applications — Railway rolling stock — Draw gear and screw coupling
EN 15595: Railway applications - Braking - Wheel slide protection
EN 15610: Railway applications - Acoustics - Rail and wheel roughness measurement related to noise generation
EN 15611: Railway applications — Braking — Relay valves
EN 15612: Railway applications — Braking — Brake pipe accelerator valve
EN 15624: Railway applications — Braking — Empty-loaded changeover devices
EN 15625: Railway applications — Braking — Automatic variable load sensing devices
EN 15663: Railway applications — Definition of vehicle reference masses
EN 15714: Industrial Valves - Actuators
EN 15744: Film identification — Minimum set of metadata for cinematographic works
EN 15804: Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products
EN 15806: Railway applications — Braking — Static brake testing
EN 15807: Railway applications — Pneumatic half couplings
EN 15827: Railway applications — Requirements for bogies and running gears
EN 15838: Customer Contact Centres - Requirements for service provision
EN 15839: Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Freight wagons — Testing of running safety under longitudinal compressive forces
EN 15877: Railway applications — Marking on railway vehicles
- Part 1: Freight wagons
- Part 2: External markings on coaches, motive power units, locomotives and on track machines
EN 15883: Washer-disinfectors
EN 15907: Film identification — Enhancing interoperability of metadata - Element sets and structures
EN 16001: Energy management systems; withdrawn, replaced by ISO 50001
EN 16034: Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics
EN 16114: Management consultancy services
EN 16207: Railway applications — Braking — Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock
EN 16228: Drilling and foundation equipment – Safety
- EN 16228-1: Common requirements
- EN 16228-2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
- EN 16228-3: Horizontal directional drilling equipment (HDD)
- EN 16228-4: Foundation equipment
- EN 16228-5: Diaphragm walling equipment
- EN 16228-6: Jetting, grouting and injection equipment
- EN 16228-7: Interchangeable auxiliary equipment
EN 16247: Energy audits
EN 16404: Railway applications — Re-railing and recovery requirements for railway vehicles
EN 16725: Railway applications — Track — Restoration and repair of manganese crossings
EN 16729: Railway applications – Infrastructure – Non-destructive testing on rails in track
- EN 16729-1: Part 1: Requirements for ultrasonic inspection and evaluation principles
- EN 16729-2: Part 2: Eddy current testing of rails in track
- EN 16729-3: Part 3: Requirements for identifying internal and surface rail defects
- EN 16729-4: Part 4: Qualification of personnel for non-destructive testing on rails
- EN 16729-5: Part 5: Non-destructive testing on welds in track
EN 16804: Diving equipment — Diving open heel fins — Requirements and test methods
EN 16805: Diving equipment — Diving mask — Requirements and test methods
EN 16931-1: Electronic Invoicing - Semantic data model of the core elements of an electronic invoice
EN 17161: Design for All - Accessibility following a Design for All approach in products, goods and services - Extending the range of users
EN 17282: Railway applications — Infrastructure —Under ballast mats
EN 17343: Railway applications — General terms and definitions
EN 17397: Railway applications — Rail defects
- EN 17397-1: Part 1: Rail defect management
EN 17495: Railway Applications — Acoustics — Determination of the dynamic stiffness of elastic track components related to noise and vibration: Rail pads and rail fastening assemblies
EN 17682: Railway applications — Infrastructure — Resilient element for floating slab system

EN 20000–49999

EN 20345: Personal Protective Equipment – Safety Footwear
EN 28601: Data elements and interchange formats; information interchange; representation of dates and times
EN 45011: General requirements for bodies operating product certification systems, replaced in 2012 by ISO/IEC 17065 Conformity assessment: Requirements for bodies certifying products, processes and services.^[7]
EN 45502-1: Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer
EN 45545: Railway applications. Fire protection on railway vehicles.
- EN 45545-1: Railway applications. Fire protection on railway vehicles. General
- EN 45545-2: Railway applications. Fire protection on railway vehicles. Requirements for fire behaviour of materials and components
- EN 45545-3: Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers
- EN 45545-4: Railway applications. Fire protection on railway vehicles. Fire safety requirements for rolling stock design
- EN 45545-5: Railway applications. Fire protection on railway vehicles. Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles
- EN 45545-6: Railway applications. Fire protection on railway vehicles. Fire control and management systems
- EN 45545-7: Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations
EN 45554: General methods for the assessment of the ability to repair, reuse and upgrade energy-related products

EN 50000–59999 (CENELEC specific, non-IEC electrical standards)

EN 50022: 35 mm snap-on top-hat mounting rails for low-voltage switchgear (DIN rail)
EN 50075: Europlug
EN 50090: Home and Building Electronic Systems (KNX/EIB)
EN 50102: Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts
EN 50119: Railway applications - Fixed installations: Electric traction overhead contact lines for railways
EN 50121: Railway applications - Electromagnetic compatibility
- EN 50121-1: Railway applications - Electromagnetic compatibility Part 1: General
- EN 50121-2: Railway applications - Electromagnetic compatibility - Part 2 : emission of the whole railway system to the outside world
- EN 50121-3-1: Railway applications - Electromagnetic compatibility - Part 3-1 : rolling stock - Train and complete vehicle
- EN 50121-3-2: Railway applications - Electromagnetic compatibility - Part 3-2 : rolling stock - Apparatus
- EN 50121-4: Railway applications - Electromagnetic compatibility - Part 4 : emission and immunity of the signaling and telecommunications apparatus
- EN 50121-5: Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
EN 50122: Railway applications - Fixed installations
- EN 50122-1: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
- EN 50122-2: Railway applications - Fixed installations - Part 2: Protective provisions against the effects of Stray currents caused by d.c. traction systems
- EN 50122-3: Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of a.c. and d.c. traction systems
EN 50123: Railway applications - Fixed installations - D.C. switchgear
EN 50124: Railway applications - Insulation coordination
EN 50125-1: Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
EN 50125-2: Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations
EN 50125-3: Railway applications - Environmental conditions for equipment - Part 3: Equipment for signaling and telecommunications
EN 50126: Railway applications - The specification and demonstration of reliability, availability, maintainability and safety (RAMS)
EN 50128: Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems
EN 50129: Railway applications - Communication, signalling and processing systems – Safety related electronic systems for signalling
EN 50130: Alarm systems - Electromagnetic compatibility and Environmental test methods
EN 50131: Alarm systems - Intrusion and hold-up systems
EN 50136: Alarm systems - Alarm transmission systems
EN 50153: Railway applications - Rolling stock - Protective provisions relating to electrical hazards
EN 50155: Railway applications - Electronic equipment used on rolling stock
EN 50157: Domestic and Similar Electronic Equipment Interconnection Requirements (Part1 = AV.link)
EN 50159: Railway applications - Communication, signaling and processing systems - Safety-related communication in transmission systems
EN 50163: Railway applications - Supply voltages of traction systems
EN 50178: Electronic equipment for use in power installations
EN 50207: Railway applications - Electronic power converters for rolling stock
EN 50262: Metric cable glands
EN 50267: Corrosive Gases
EN 50272-1: Standards for Safety requirements for secondary batteries and battery installations - Part 1 General safety information
EN 50272-2: Standards for Safety requirements for secondary batteries and battery installations - Part 2 Stationary batteries
EN 50522: Earthing of power installations exceeding 1 kV a.c.
EN 50308: Wind Turbines - Protective Measures - Requirements for design, operation and maintenance
EN 50325: Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces
EN 50412: Power line communication apparatus and systems used in low-voltage installations in the frequency range 1.6 MHz to 30 MHz
EN 50436: Alcohol interlocks
EN 50465: Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
EN 50470-3: Electricity metering equipment - Part 3: Particular requirements - Static meters for AC active energy (class indexes A, B and C)
EN 50470-4: Electricity metering equipment - Part 4: Particular requirements - Static meters for DC active energy (class indexes A, B and C)
EN 50525: Low voltage energy cables; a merger of HD 21 and HD 22.
EN 50571: Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
EN 50562: Railway applications - Fixed installations - Process, protective measures and demonstration of safety for electric traction systems
EN 50581: documentation for the assessment of electrical and electronic products with respect to the RoHS
EN 50600: Information technology - Data centre facilities and infrastructures
EN 50617-1: Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits
EN 50617-2: Railway Applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 2: Axle counters
EN 50632: Electric motor-operated tools - Dust measurement Procedure
EN 50657: Railways Applications - Rolling stock applications - Software on Board Rolling Stock
EN 50716: Cross-functional Software Standard for Railways
EN 55011: Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
EN 55014: Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus
EN 55022: Information technology equipment. Radio disturbance characteristics.
EN 55024: Information technology equipment. Immunity characteristics.
EN 55032: Electromagnetic Compatibility of Multimedia Equipment. Emission requirements.
EN 55035: Electromagnetic Compatibility of Multimedia Equipment. Immunity requirements.

EN 60000-69999 (CENELEC editions of IEC standards)

EN 60065: Audio, Video and similar electronics apparatus - Safety requirements.
EN 60077: Railway applications - Electric equipment for rolling stock
EN 60950-1: Information technology equipment - Safety - Part1: General requirements
EN 60950-21: Information technology equipment - Safety - Part21: Remote power feeding
EN 60950-22: Information technology equipment - Safety - Part22: Equipment installed outdoors
EN 60950-23: Information technology equipment - Safety - Part23: Large data storage equipment
EN 61000-1-2: Electromagnetic compatibility (EMC). General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
EN 61000-1-3: Electromagnetic compatibility (EMC). General. The effects of high-altitude EMP (HEMP) on civil equipment and systems
EN 61000-1-4: Electromagnetic compatibility (EMC). General. Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
EN 61000-1-5: Electromagnetic compatibility (EMC). General. High power electromagnetic (HPEM) effects on civil systems
EN 61000-1-6: Electromagnetic compatibility (EMC). General. Guide to the assessment of measurement uncertainty
EN 61000-2-2: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signaling in public low-voltage power supply systems
EN 61000-2-4: Electromagnetic compatibility (EMC). Environment. Compatibility levels in industrial plants for low-frequency conducted disturbances
EN 61000-2-9: Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Radiated disturbance. Basic EMC publication
EN 61000-2-10: Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Conducted disturbance
EN 61000-2-12: Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signaling in public medium-voltage power supply systems
EN 61000-3-2: Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
EN 61000-3-3: Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
EN 61000-3-11: Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current ≤ 75 A and subject to conditional connection
EN 61000-3-12: Electromagnetic compatibility (EMC). Limits.
EN 61000-4-1: Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC 61000-4 series
EN 61000-4-2: Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test. Basic EMC publication
EN 61000-4-3: Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4: Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test
EN 61000-4-5: Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test
EN 61000-4-6: Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-7: Electromagnetic compatibility (EMC). Testing and measurement techniques. General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
EN 61000-4-8: Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test. Basic EMC publication
EN 61000-4-11: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
EN 61000-4-12: Electromagnetic compatibility (EMC). Testing and measurement techniques. Oscillatory waves immunity test. Basic EMC publication
EN 61000-4-13: Electromagnetic compatibility (EMC). Testing and measurement techniques. Harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity tests
EN 61000-4-14: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
EN 61000-4-15: Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications. Basic EMC publication
EN 61000-4-16: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
EN 61000-4-17: Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity test
EN 61000-4-18: Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory wave immunity test
EN 61000-4-19: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, differential mode disturbances and signaling in the frequency range 2 kHz to 150 kHz at a.c. power ports
EN 61000-4-20: Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
EN 61000-4-21: Electromagnetic compatibility (EMC). Testing and measurement techniques. Reverberation chamber test methods
EN 61000-4-22: Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated emission and immunity measurements in fully anechoic rooms (FARs)
EN 61000-4-23: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances
EN 61000-4-24: Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication
EN 61000-4-25: Electromagnetic compatibility (EMC). Testing and measurement techniques. HEMP immunity test methods for equipment and systems
EN 61000-4-27: Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
EN 61000-4-28: Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase
EN 61000-4-29: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c.input power ports. Immunity tests. Basic EMC Publication.
EN 61000-4-30: Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. Power quality measurement methods
EN 61000-4-34: Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
IEC 61000-5-1 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. General considerations. Basic EMC publication
EN 61000-5-5 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Specification of protective devices for HEMP conducted disturbance. Basic EMC publication
EN 61000-5-7 Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code). Degrees of protection against electromagnetic disturbances provided by enclosures (EM code)
EN 61000-6-1 Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments
EN 61000-6-2 Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
EN 61000-6-3 Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
EN 61000-6-4 Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
EN 62061 /IEC 62061 Safety of machinery: Functional safety of electrical, electronic and programmable electronic control systems
EN 62353:2014 Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment

Moreover, there are a lot of ISO and IEC standards that were accepted as "European Standard" (headlined as EN ISO xxxxx) and are valid in the European Economic Region.

Reference s

^ Paul Cook (2002). Commentary on IEE Wiring Regulations 16th Edition, BS 7671 : 2001: Requirements for Electrical Installations Including Amendment No. 1 : 2002. IET. p. 2. ISBN 978-0-85296-237-4.
^ Hermann J. Koch (2017). Practical Guide to International Standardization for Electrical Engineers: Impact on Smart Grid and e-Mobility Markets. Wiley. p. 90. ISBN 978-1-119-06743-6.
^ BSI, BS EN 1325-1:1997 - Value management, value analysis, functional analysis vocabulary. Value analysis and functional analysis, accessed 29 November 2020
^ Bringas, John E. (2004), Handbook of Comparative World Steel Standards: Third Edition (PDF) (3rd. ed.), ASTM International, p. 18, ISBN 0-8031-3362-6
^ BS EN 12845:2015+A1:2019 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance, as amended 2019, accessed 23 November 2020
^ "BS EN 13204:2004 - Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements – BSI British Standards". Retrieved 2011-11-12.
^ Engineering 360, DS/EN 45011: General requirements for bodies operating product certification systems, accessed 29 November 2022

External links

[Cook2002-1] Paul Cook (2002). Commentary on IEE Wiring Regulations 16th Edition, BS 7671 : 2001: Requirements for Electrical Installations Including Amendment No. 1 : 2002. IET. p. 2. ISBN 978-0-85296-237-4.

[Koch2017-2] Hermann J. Koch (2017). Practical Guide to International Standardization for Electrical Engineers: Impact on Smart Grid and e-Mobility Markets. Wiley. p. 90. ISBN 978-1-119-06743-6.

[3] BSI, BS EN 1325-1:1997 - Value management, value analysis, functional analysis vocabulary. Value analysis and functional analysis, accessed 29 November 2020

[4] Bringas, John E. (2004), Handbook of Comparative World Steel Standards: Third Edition (PDF) (3rd. ed.), ASTM International, p. 18, ISBN 0-8031-3362-6

[5] BS EN 12845:2015+A1:2019 Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance, as amended 2019, accessed 23 November 2020

[6] "BS EN 13204:2004 - Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements – BSI British Standards". Retrieved 2011-11-12.

[7] Engineering 360, DS/EN 45011: General requirements for bodies operating product certification systems, accessed 29 November 2022

[1]

[2]

[3]

[4]

[5]

[6]

[7]