Panzerfaust

Panzerfaust
A Wehrmacht Gefreiter aims a Panzerfaust 30 using the integrated leaf sight.
Type	Man-portable anti-tank recoilless gun
Place of origin	Nazi Germany
Service history
In service	1943–1945 (Germany)
Used by	See Users
Wars	World War II Greek Civil War
Production history
Unit cost	15–25 Reichsmark
Produced	1942–1945
No. built	8,254,300 (all variants)[1]
Variants	Panzerfaust 30, 60, 100, 150, 250
Specifications (Panzerfaust 60)
Mass	6.25 kg (13.8 lb)
Length	~1 m (3 ft 3 in)
Effective firing range	60 m (200 ft)
Sights	leaf
Filling	Shaped charge
Detonation mechanism	Impact

The Panzerfaust (German: [ˈpantsɐˌfaʊst], lit. 'tank fist' or 'armour fist',^[2] plural: Panzerfäuste) was a development family of single-shot man-portable anti-tank systems developed by Nazi Germany during World War II. The weapons were the first single-use light anti-tank weapons based on a pre-loaded disposable launch tube, a weapon configuration which is still used today (a modern example being the AT4).

The Panzerfaust-design consisted of a light recoilless launcher tube outfitted with a single pre-loaded high-explosive anti-tank warhead protruding from the muzzle. It was an inexpensive, easy-to-use anti-tank weapon for the common infantry man, being issued as a single unit of ammunition meant to be operated by a single soldier. Firing was done from under the arm at an upward angle as the effective firing range was barely beyond that of hand grenades (30–60 m (98–197 ft) max). After use the launcher was discarded.

Development of the Panzerfaust started in 1942. The initial design was dubbed Faustpatrone (lit. "fist-cartridge") and was smaller than the later designs. Later dubbed Panzerfaust Klein ("tank-fist small"), it entered service in 1943, the larger design being named Panzerfaust Gross ("tank-fist big") and entering service in mid to late 1944. All types were used by Germany until the end of the war, with the design remaining in use in other countries for a number of years after the war.^[3][4]

The Faustpatrone (lit. "fist cartridge") was the initial development of what eventually became the Panzerfaust-family. The Faustpatrone-design was much smaller than the later Panzerfäuste-designs.

Development of the Faustpatrone started in the summer of 1942 at the German company Hugo Schneider AG (HASAG) with the development of a smaller prototype called Gretchen ("little Greta") by a team headed by Doctor Heinrich Langweiler in Leipzig. The basic concept was that of a recoilless gun; in the Faustpatrone and the Panzerfaust, a propellent charge pushed the warhead out the front of the tube while the blast also exited the rear of the tube, balancing forces, and therefore there was no recoil force for the operator.

The following weapon, the Faustpatrone Klein, 30 m ("fist-cartridge small") weighed 3.2 kg (7.1 lb) and a total length of 98.5 cm (38+3⁄4 in); its projectile had a length of 36 cm (14+1⁄4 in). The 10 cm (3.9 in) diameter of warhead was a shaped charge of 400 g (14 oz) of a 50:50 mix of TNT and tri-hexogen. The propellant was of 54 g (1.9 oz; 830 gr) of black powder, the metal launch tube had a length of 80 cm (31+1⁄2 in) and a diameter of 3.3 cm (1.3 in) (early models reportedly 2.8 cm (1.1 in)). Fitted to the warhead was a wooden shaft with folded stabilizing fins (made of 0.25 mm (0.0098 in) thick spring metal). These bent blades straightened into position by themselves as soon as they left the launch tube. The warhead was accelerated to a speed of 28 m/s (92 ft/s), had a range of about 30 m (98 ft) and an armour penetration of up to 140 mm (5+1⁄2 in) of plain steel.

Soon a crude aiming device similar to the one used by the Panzerfaust was added to the design; it was fixed at a range of 30 m (98 ft). Several designations of this weapon were in use, amongst which Faustpatrone 1 or Panzerfaust 30 klein; however, it was common to refer to this weapon simply as the Faustpatrone. Of the earlier model, 20,000 were ordered and the first 500 Faustpatronen were delivered by the manufacturer, HASAG, Werk Schlieben, in August 1943.

Development began in 1942 on a larger version of the Faustpatrone. The resulting weapon was the Panzerfaust 30, also known as Panzerfaust Gross (lit. "tank-fist big") and the like, with a total weight of 5.1 kilograms (11.2 lb) and total length of 104.5 centimetres (3.4 ft). The launch tube was made of low-grade steel 44 millimetres (1.7 in) in diameter, containing a 95-gram (3.4 oz) charge of black powder propellant. Along the side of the tube were a simple folding rear sight and a trigger. The edge of the warhead was used as the front sight. The oversize warhead (140 mm (5.5 in) in diameter) was fitted into the front of the tube by an attached wooden tail stem with metal stabilizing fins.^[8]

The warhead weighed 2.9 kilograms (6.4 lb) and contained 0.8 kilograms (1.8 lb) of a 50:50 mixture of TNT and hexogen explosives, and had armour penetration of 200 millimetres (7.9 in).^[9] The Panzerfaust often had warnings written in large red letters on the upper rear end of the tube, the words usually being "Achtung. Feuerstrahl." ("Beware. Fire jet."). This was to warn soldiers to avoid the backblast.

After firing, the tube was discarded, making the Panzerfaust the first disposable anti-tank weapon. The weapon, when correctly fired from the crook of the arm, could penetrate the armour of any armoured fighting vehicle of the period.^[10]

Designation	Weight	Propellant weight	Warhead diameter	Projectile velocity	Effective range	Penetration performance
Faustpatrone 30 Panzerfaust (Klein) 30m	2.7–3.2 kg (5 lb 15 oz – 7 lb 1 oz)	70 g (2.5 oz)	100 mm (3.9 in)	28 m/s (63 mph)	30 m (98 ft)	140 mm (5.5 in)
Panzerfaust 30 Panzerfaust (Gross) 30m	5.22 kg (11.5 lb)	95–100 g (3.4–3.5 oz)	149 mm	30 m/s	30 m	200 mm
Panzerfaust 60	6.8 kg	120–134 g	149 mm	45 m/s	60 m	200 mm
Panzerfaust 100	6.8 kg (15 lb)	190–200 g (6.7–7.1 oz)	149 mm	60 m/s	100 m (330 ft)	200 mm (7.9 in)
Panzerfaust 150	7 kg (15 lb)	190–200 g (6.7–7.1 oz)	106 mm (4.2 in)	85 m/s (190 mph)	150 m (490 ft)	280–320 mm (11–13 in)

To use the Panzerfaust, the soldier removed the safety, tucked the tube under their arm, and aimed by aligning the target, the sight and the top of the warhead. Unlike the original American M1 60 mm bazooka and the Germans' own heavier 88 mm Panzerschreck tube-type rocket launchers based on the American ordnance piece, the Panzerfaust did not have the usual trigger. It had a pedal-like lever near the projectile that ignited the propellant when squeezed. Because of the weapon's short range, not only enemy tanks and infantry, but also pieces of the exploding vehicle, posed dangers to its operator. Consequently, the use of a Panzerfaust required a degree of personal courage.^[11][12] The backblast from firing went back around 2 m behind the operator.

When used against tanks, the Panzerfaust had an impressive beyond-armour effect. Compared to the bazooka and the Panzerschreck, it made a larger hole and produced massive spalling that killed or injured the crew, due to burns and shrapnel, and destroyed equipment. One informal test found that the Panzerfaust made an entry hole 2.75 inches (7 cm) in diameter, whereas the Panzerschreck made an entry hole at least 1 inch (2.5 cm) in diameter. By contrast, the bazooka made an entry hole that was only 0.5 inches (1.3 cm) in diameter).^[13] Much of that can be attributed not only to the size of the warhead of the Panzerfaust, but also its horn-like shape, as opposed to the traditional cone-shaped warheads of rockets used in the bazooka and Panzerschreck.^{[citation needed]} The design was later copied in the modern-day AT-4 anti-tank weapon, producing the same effect against modern main battle tanks.

In the Battle of Normandy, only 6% of British tank losses were from Panzerfaust fire, despite the close-range combat in the thick bocage landscape. However, the threat from the Panzerfaust forced Allied tank forces to wait for infantry support before advancing. The portion of British tanks taken out of action by Panzerfäuste later rose to 34%, a rise probably explained by the lack of German anti-tank guns late in the war and the increased numbers of Panzerfäuste that were available to defending German troops.^[14]

During urban combat in eastern Germany later in the war, about 70% of tanks destroyed were hit by Panzerfäuste or Panzerschrecks. Soviet and Western Allied tank crews modified their tanks in the field to provide some protection against Panzerfaust attacks. Defensive measures included the use of logs, sandbags, track links, and concrete and wire mesh, along with bed frames with springs (bedsprings), similar to expanded metal-type German tank sideskirts. In practice, about a meter of air gap was required to substantially reduce the penetrating capability of the warhead, so sideskirts and sandbags, along with other improvised armor, were virtually ineffective against both the Panzerschreck and Panzerfaust. Moreover, the added weight from add-on armor overburdened the vehicle's engine, transmission and suspension.^[15]

Later on, each Soviet heavy tank (IS) and assault gun (ISU-152) company was assigned a platoon of infantry in urban battles to protect them from infantry-wielded anti-tank weapons, often supported by flamethrowers. That order remained intact even during 1950s, including during the Hungarian Revolution of 1956.^[15][16][17]

During the last stages of the war, due to the lack of available weapons, many poorly-trained conscripts, mainly elderly men and teenage Hitler Youth members, were often given a single Panzerfaust, plus any type of obsolete pistol or rifle. Some only had a Panzerfaust. That led several German generals and officers to comment sarcastically that the empty launch-tubes could then be used as clubs in hand-to-hand combat.

Many Panzerfäuste were sold to Finland, which urgently needed them, as Finnish forces did not have enough anti-tank weapons that could penetrate heavily armoured Soviet tanks like the T-34 and IS-2. The Finnish experience with the weapon and its adaptability to Finnish needs was mixed, with only 4,000 of 25,000 Panzerfäuste delivered expended in combat.^[18] The manual that came with the weapon upon delivery to the Finns included depictions of where to aim the weapon on the Soviet T-34 and US Sherman tank (which also saw service with Soviet troops from US Lend-Lease-supplied stocks).^{[citation needed]}

The Italian Social Republic (RSI) and the Government of National Unity (Hungary) also used the Panzerfaust. Several RSI army units became skilled in anti-tank warfare and the Hungarians themselves used the Panzerfaust extensively, especially during the Siege of Budapest. During this brutal siege, an arms factory, the Hungarian Manfred Weiss Steel and Metal Works, located on Csepel Island (within the city) kept up production of various light armaments and ammunition, Panzerfäuste included, all the way until the very last moment, when attacking Soviet troops seized the factory by the first days of 1945.

The US 82nd Airborne Division captured some Panzerfäuste in the Allied invasion of Sicily and later during the fighting in Normandy. Finding them more effective than their own bazookas, they held onto them and used them during the later stages of the French Campaign, even dropping with them into the Netherlands during Operation Market Garden. They captured an ammunition dump of Panzerfäuste near Nijmegen and used them through the Ardennes Offensive toward the end of the war.^[19]

The Soviet Red Army only incidentally used captured Panzerfäuste in 1944, but from the beginning of 1945, many became available and were actively used during the Soviet offensives of 1945, mostly in street fighting against buildings and protective covers.^[20] In February 1945, such use of captured Panzerfäuste was recommended in a directive by Marshal Georgy Zhukov.^[20] Similarly, they were used by the Polish People's Army.^[20] After the war, some 4,000 Panzerfäuste were adopted by the Polish Army in 1949, which designated them as PG-49.^[20]

Plans and technical materials on the Panzerfaust were supplied to the Empire of Japan to assist with their development of an effective anti-tank weapon. However, the Japanese went with a different design, the Type 4, loosely based upon the American bazooka. Examples of the American weapon were captured by the Japanese at Leyte in 1944.^[21]

Panzerfaust 30 klein ("small") or Faustpatrone

This was the original version, first delivered in August 1943 with a total weight of 3.2 kilograms (7.1 lb) and overall length of 98.5 cm (38.8 in). The "30" was indicative of the nominal maximum range of 30 m (33 yd). It had a 3.3 cm (1.3 in) diameter tube containing 54 grams (1.9 oz) of black powder propellant launching a 10 cm (3.9 in) warhead carrying 400 g (14 oz) of explosive. The projectile traveled at just 30 m (98 ft) per second and could penetrate 140 mm (5.5 in) of armour.^[8]

Panzerfaust 30

An improved version also appearing in August 1943. This version had a larger warhead for improved armour penetration, 200 mm (7.9 in) of steel and 5.5 inches (140 mm) of armoured steel, but the same range of 30 meters. It has an explosive charge of 3.3 pounds (1.5 kg) of explosive material. Its barrel has a caliber of 1.7 inches (43 mm) and a length of 40.6 inches (103 cm). It has a weight of 11.2 pounds (5.1 kg) and a muzzle velocity of 148 feet per second (45 m/s).^[22]

Panzerfaust 60

This was the most common version, and was completed in early 1944. However, it did not reach full production until September 1944, when 400,000 were to be produced each month.^[23] It had a much more practical range of 60 m (66 yd), although with a muzzle velocity of only 45 m (148 ft) per second it would take 1.3 seconds for the warhead to reach a tank at that range. To achieve the higher velocity, the tube diameter was increased to 5 cm (2.0 in) and 134 g (4.7 oz) of propellant used while being a total length of 104 cm (41 in). It also had an improved flip-up rear sight and trigger mechanism. The weapon now weighed 6.1 kg (13 lb). It could defeat 200 mm (7.9 in) of armour.

Panzerfaust 100

This was the final version produced in quantity, and was completed in September 1944. However, it did not reach full production until November 1944.^[23] It had a nominal maximum range of 100 m (330 ft). 190 g (6.7 oz) of propellant launched the warhead at 60 m (200 ft) per second from a 6 cm (2.4 in) diameter tube. The sight had holes for 30, 60, 80 and 150 m (260 and 490 ft), and had luminous paint in them to make counting up to the correct one easier in the dark. This version weighed 6 kg (13 lb) and could penetrate 220 mm (8.7 in) of armour.

Panzerfaust 150

A major redesign of the Panzerfaust, the Panzerfaust 150 featured a new pointed warhead (with a diameter of 105 mm compared to the 140 mm warhead of the Panzerfaust 30/60/100 series) with increased armour penetration and two-stage propellant ignition which gave a higher velocity of 85 m (279 ft) per second. A fragmentation sleeve was developed for the Panzerfaust 150 to increase its lethality against infantry. The projectile had a delay pellet to the base detonating primer which meant that the projectile exploded after three seconds if it didn't hit its target or a hard surface. This was meant to eliminate duds and also allowed for air bursts to be achieved when combined with the fragmentation sleeve. Production the Panzerfaust 150 started in February 1945 and continued until May of that year when the facility in Döbeln, Saxony producing the Panzerfaust 150 was captured by the Soviets. Although 100,000 were produced, none were issued to field units beyond limited troop trials. No known examples of the Panzerfaust 150 survived the end of the war.^[24] A further development of the Panzerfaust 150 was meant to make it a reloadable weapon, capable of firing ten shots before the black powder fouling built up to the point that the weapon needed to be inspected and cleaned. This development was to be completed in May 1945, with production of the improved Panzerfaust 150 scheduled to commence in the summer of that year. "The reloadable Pzf 150 might have received a new designation if it had been produced."^[25]

Panzerfaust 250

The last development of the Panzerfaust series was the Panzerfaust 250. Intended to replace the heavier Panzerschreck in German service, this design never left the drawing board. It was to use a reloadable tube and featured a pistol grip. The projectile was to be based on the one used by the Panzerfaust 150, but the internal propellant charge was to be larger. Projected muzzle velocity was 120–150 m/s.^[26] Serial production was scheduled to begin in September 1945. The Soviet RPG-2 anti-tank weapon took some inspiration from the Panzerfaust 250 design (it was also a reloadable, recoilless anti-tank weapon with a trigger grip and electrical firing system). Plans for the Panzerfaust 250 had fallen into both American and Soviet hands.^[27]

PAPI

Argentine-made antitank weapon, similar to the Panzerfaust. The acronym stands for proyectil antitanque para infanteria (Spanish for "infantry anti-tank projectile").^{[citation needed]}

Pansarskott m/45 and pansarskott m/46

Swedish-made copies of the Panzerfaust. The Royal Swedish Army Materiel Administration ordered a copy of the Panzerfaust design from Bofors, examples of which were acquired from Finland and the Danish resistance movement. The resulting weapon, a copy of an early model Panzerfaust, was designated pansarskott m/45 and 10,000 were ordered by the Swedish Armed Forces in late 1945. Albeit judged effective against tanks of the day, the muzzle velocity was low and the effective range was only about 70 meters. Pansarskott m/45 was quickly upgraded by replacing the black powder propellant charge with smokeless powder. The resulting weapon, pansarskott m/46, had an effective range of about 90 meters.^[28]

Pc-100 (PC-100, pancerzownica 100m)

Polish-made copy of the Panzerfaust 100, manufactured in 1951–1952. Despite large-scale orders, a production encountered technological difficulties and only 5000 combat and 940 training Pc-100 were made in 1952, before the Polish Army switched to more modern Soviet RPG-2.^[29] It is erroneously known as PT-100 in foreign publications.^[29]

Panzerfaust

•  Germany: Known to be first used in 1943^[30]
•  Bulgaria^[31]
•  Finland^[31]
•  Hungary^[31][32]
•  Italian Social Republic
•  Poland: Polish partisans used captured Panzerfäuste during the war, and then there was some limited use post-war by the new Soviet-installed communist puppet regime's armed forces into the early 1950s under the designation PG-49).^[20]
•  Czechoslovakia: The Czech resistance used captured Panzerfäuste during the Prague uprising.^[33]
•  Romania^[31]
•  Soviet Union: The Red Army used captured Panzerfäuste in 1944 and 1945.^[20]
•  United States: U.S. Army troops used captured examples, from Operation Overlord through VE Day^[23]
• Democratic Army of Greece: Used captured Panzerfäuste during the Greek Civil War.^[34]

Derivatives

•  Argentina: Argentine-made PAPI and possibly Swedish made Pansarskott m/46^[35][36]
•  Poland: Polish-made copy Pc-100^[29]
•  Sweden: Manufactured and used copies of the Panzerfaust in two variants; Pansarskott m/45 and Pansarskott m/46^[28]

• Chuikov, Vasili Ivanovich (1969). The End of the Third Reich. Translated by Kisch, Ruth. Panther Books. ISBN 978-0-586-02775-2. LCCN 74534462.

• Contemporary U.S. Intelligence Report on German Hollow-Charge Weapons