[go: up one dir, main page]
More Web Proxy on the site http://driver.im/Jump to content

Canal through Walcheren

Coordinates: 51°29′47″N 3°37′09″E / 51.49639°N 3.61917°E / 51.49639; 3.61917
From Wikipedia, the free encyclopedia
Canal through Walcheren
Looking toward Middelburg from a bridge at Souburg.
Map
CountryThe Netherlands
Specifications
Length16 kilometres (9.9 miles; 8.6 nautical miles)
Lock length140.7 m (462 ft) [1]
Lock width23.4 m (77 ft)
Maximum boat length130 m (427 ft) [2]
Maximum boat beam18 m (59.1 ft)
Maximum boat draft4.5 m (14.8 ft)
Maximum boat air draftno limit
Original number of locks2 x 2 + safety lock gates
Statusoperational
Navigation authorityProvince Zeeland
History
Construction began1870
Date completed1873
Geography
Start pointVeerse Meer at Veere
End pointWestern Scheldt at Vlissingen
Beginning coordinates51°32′51.6″N 3°40′20″E / 51.547667°N 3.67222°E / 51.547667; 3.67222
Ending coordinates51°26′20″N 3°36′11″E / 51.43889°N 3.60306°E / 51.43889; 3.60306
Branch(es)Arnekanaal, Middelburg harbour
Connects toArnemuiden and
Nieuw- en Sint Joosland
Map

The Canal through Walcheren in the Netherlands crosses the east of Walcheren. It connects the Westerschelde and the Veerse Meer.

Context

[edit]

In the 15th and 16th century Middelburg, capital of Zeeland was booming. The city was on Walcheren Island, and had a connection to the sea just to the east via the small river Arne. In 1535 the Havenkanaal was opened,[3] and Middelburg continued in prosperity. However, in the 17th and 18th century Middelburg's connections to the sea all silted up.[4]

In 1809 King Louis Bonaparte decided to construct the New Harbor Canal, which connected Middelburg to Veere. After the annexation by France this work was halted. After independence was regained in 1813, work continued. It was made possible by a national subsidy (a loan without interest) of 1,000,000 guilders. Middelburg would repay 25,000 guilders a year. The canal was opened in August 1817, but the prosperity of Middelburg was not restored.[5]

History

[edit]
Railway map of 1897

In 1871 the Sloedam was constructed for the Roosendaal–Vlissingen railway. The dam connected the islands Walcheren and Zuid-Beveland, and cut off the Sloe, which was the southern approach to Middelburg over water. Therefore, and to profit from the expected benefits of the railway, the new Canal through Walcheren was dug.

On the north side of Middelburg, the Canal through Walcheren follows the bed of the Havenkanaal (New Harbor Canal) of 1817.[5] In Middelburg the canal passed along the fortifications. Here it led to the demolishment of the Vlissingen Gate. In Vlissingen the canal was connected to extensive new harbour works.

The railroad entering Walcheren from the east does not cross this canal, but bends south and runs along it up to Vlissingen.

Today

[edit]

The canal is operational for shipping up to CEMT-class Va and recreational boating as well, the maximum speed is 20 kilometres per hour (12.4 miles per hour; 10.8 knots). All movable bridges (5) and sluices are remote controlled from a central point in Vlissingen, to be contacted by VHF.
North of the bridges in Middelburg is a branch to the harbour of Arnemuiden for CEMT-class II boats and after a mile on that canal an other branch to the harbour of Nieuw- en Sint Joosland for CEMT-class 0.
Excess waters (rain) from a part of Walcheren is discharged on the canal by a pumping station in Middelburg.

References

[edit]
  • Hollestelle, Leo (2009), "Een majestueuze entree, Het havenkanaal van Middelburg 1535-1816" (PDF), De Wete, 38 (1), Heemkundige Kring Walcheren (www.hkwalcheren.nl): 3–17

51°29′47″N 3°37′09″E / 51.49639°N 3.61917°E / 51.49639; 3.61917