Abstract
Lead halide perovskite semiconductors are in general known to have an inherently high X-ray absorption cross-section and a significantly higher carrier mobility than any other low-temperature solution-processed semiconductor. So far, the processing of several-hundred-micrometres-thick high-quality crystalline perovskite films over a large area has been unresolved for efficient X-ray detection. In this Article, we present a mechanical sintering process to fabricate polycrystalline methyl ammonium lead triiodide perovskite (MAPbI3) wafers with millimetre thickness and well-defined crystallinity. Benchmarking of the MAPbI3 wafers against state-of-the-art CdTe detectors reveals competitive conversion efficiencies of 2,527 µC Gyair−1 cm−2 under 70 kVp X-ray exposure. The high ambipolar mobility–lifetime product of 2 × 10−4 cm2 V−1 is suggested to be responsible for this exceptionally high sensitivity. Our findings inform a new generation of highly efficient and low-cost X-ray detectors based on perovskite wafers.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
£14.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 print issues and online access
£139.00 per year
only £11.58 per issue
Buy this article
- Purchase on SpringerLink
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Saparov, B. & Mitzi, D. B. Organic–inorganic perovskites: structural versatility for functional materials design. Chem. Rev. 116, 4558–4596 (2016).
Stranks, S. D. & Snaith, H. J. Metal-halide perovskites for photovoltaic and light-emitting devices. Nat. Nanotech. 10, 391–402 (2015).
Stranks, S. D. et al. Electron–hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science 342, 341–344 (2013).
Zakutayev, A. et al. Defect tolerant semiconductors for solar energy conversion. J. Phys. Chem. Lett. 5, 1117–1125 (2014).
Dong, Q. et al. Electron–hole diffusion lengths >175 μm in solution-grown CH3NH3PbI3 single crystals. Science 347, 967–970 (2015).
Yakunin, S. et al. Detection of X-ray photons by solution-processed lead halide perovskites. Nat. Photon. 9, 444–449 (2015).
Wei, H. et al. Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals. Nat. Photon. 10, 333–339 (2016).
Yakunin, S. et al. Detection of gamma photons using solution-grown single crystals of hybrid lead halide perovskites. Nat. Photon. 10, 585–589 (2016).
Kasap, S. O., Kabir, M. Z . & Rowlands, J. A. Recent advances in X-ray photoconductors for direct conversion X-ray image detectors. Curr. Appl. Phys. 6, 288–292 (2006).
Kasap, S. O. X-ray sensitivity of photoconductors: application to stabilized a-Se. J. Phys. D 33, 2853–2865 (2000).
Street, R. A. et al. Electronic transport in polycrystalline PbI2 films. J. Appl. Phys. 86, 2660–2667 (1999).
Zentai, G., Schieber, M., Partain, L., Pavlyuchkova, R. & Proano, C. Large area mercuric iodide and lead iodide X-ray detectors for medical and non-destructive industrial imaging. J. Cryst. Growth 275, e1327–e1331 (2005).
Schieber, M. et al. Thick films of X-ray polycrystalline mercuric iodide detectors. J. Cryst. Growth 225, 118–123 (2001).
Richter, M. & Siffert, P. High resolution gamma ray spectroscopy with CdTe detector systems. Nucl. Instrum. Methods Phys. Res. Sect. A 322, 529–537 (1992).
Szeles, C. CdZnTe and CdTe materials for X-ray and gamma ray radiation detector applications. Phys. Status Solidi B 241, 783–790 (2004).
Seller, P. et al. Pixellated Cd(Zn)Te high-energy X-ray instrument. J. Instrum. 6, C12009 (2011).
Kasap, S. et al. Amorphous and polycrystalline photoconductors for direct conversion flat panel X-ray image sensors. Sensors 11, 5112–5157 (2011).
Skrotzki, W., Frommeyer, O. & Haasen, P. Plasticity of polycrystalline ionic solids. Phys. Status Solidi A 66, 219–228 (1981).
Zhu, F. et al. Shape evolution and single particle luminescence of organometal halide perovskite nanocrystals. ACS Nano 9, 2948–2959 (2015).
Poglitsch, A. & Weber, D. Dynamic disorder in methylammoniumtrihalogenoplumbates (II) observed by millimeter-wave spectroscopy. J. Chem. Phys. 87, 6373–6378 (1987).
Stoumpos, C. C., Malliakas, C. D. & Kanatzidis, M. G. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties. Inorg. Chem. 52, 9019–9038 (2013).
Lucca, D. A., Herrmann, K. & Klopfstein, M. J. Nanoindentation: measuring methods and applications. CIRP Ann. Manuf. Technol. 59, 803–819 (2010).
Oliver, W. C. & Pharr, G. M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564–1583 (2011).
Hay, J., Agee, P. & Herbert, E. Continuous stiffness measurment during instrumented indentation testing. Exp. Techniques 34, 86–94 (2010).
Nix, W. D. & Gao, H. Indentation size effects in crystalline materials: a law for strain gradient plasticity. J. Mech. Phys. Solids 46, 411–425 (1998).
Sun, S., Fang, Y., Kieslich, G., White, T. J. & Cheetham, A. K. Mechanical properties of organic–inorganic halide perovskites, CH3NH3PbX3 (X = I, Br and Cl), by nanoindentation. J. Mater. Chem. A 3, 18450–18455 (2015).
Maier, V. et al. Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al. J. Mater. Rec. 26, 1421–1430 (2011).
Wei, Q., Cheng, S., Ramesh, K. T. & Ma, E. Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals. Mater. Sci. Eng. A 381, 71–79 (2004).
Kawamura, Y., Mashiyama, H. & Hasebe, K. Structural study on cubic–tetragonal transition of CH3NH3PbI3 . J. Phys. Soc. Jpn 71, 1694–1697 (2002).
Kim, Y. H. et al. Multicolored organic/inorganic hybrid perovskite light-emitting diodes. Adv. Mater. 27, 1248–1254 (2015).
Yamada, Y., Nakamura, T., Endo, M., Wakamiya, A. & Kanemitsu, Y. Near-band-edge optical responses of solution-processed organic–inorganic hybrid perovskite CH3NH3PbI3 on mesoporous TiO2 electrodes. Appl. Phys. Express 7, 032302 (2014).
Fedeli, P. et al. Influence of the synthetic procedures on the structural and optical properties of mixed-halide (Br, I) perovskite films. J. Phys. Chem. C 119, 21304–21313 (2015).
Jaffe, A. et al. High-pressure single-crystal structures of 3D lead-halide hybrid perovskites and pressure effects on their electronic and optical properties. ACS Cent. Sci. 2, 201–209 (2016).
Wang, Y. et al. Pressure-induced phase transformation, reversible amorphization and anomalous visible light response in organolead bromide perovskite. J. Am. Chem. Soc. 137, 11144–11149 (2015).
Bube, R. H. Electronic transport in polycrystalline films. Ann. Rev. Mater. Sci. 5, 201–224 (1975).
Bässler, H. Charge transport in disordered organic photoconductors: a Monte Carlo simulation study. Phys. Status Solidi B 175, 15–56 (1993).
Suzuki, K., Shorohov, M., Sawada, T. & Seto, S. Time-of-flight measurements on TiBr detectors. IEEE Trans. Nucl. Sci. 62, 433–436 (2015).
Papadakis, A. C. Theory of transient space-charge perturbed currents in insulators. J. Phys. Chem. Solids 28, 641–647 (1967).
Suzuki, K., Ichinohe, Y., Sawada, T., Kazuaki Imai, K. & Seto, S. Time-of-flight measurements on Schottky CdTe nuclear detectors. Phys. Status Solidi C 11, 1337–1340 (2014).
Scharfe, M. E. Transient photoconductivity in vitreous As2Se3 . Phys. Rev. B 2, 5025–5034 (1970).
Hirao, A., Tsukamoto, T. & Nishizawa, H. Analysis of nondispersive time-of-flight transients. Phys. Rev. B 59, 12991–12995 (1999).
Pfister, G. & Scher, H. Time-dependent electrical transport in amorphous solids: As2Se3 . Phys. Rev. B 15, 2062–2083 (1977).
Brandt, R. E., Stevanović, V., Ginley, D. S. & Buonassisi, T. Identifying defect-tolerant semiconductors with high minority-carrier lifetimes: beyond hybrid lead halide perovskites. MRS Commun. 5, 265–275 (2015).
Filipenko, M., Gleixner, T., Anton, G., Durst, J. & Michel, T. Characterization of the energy resolution and the tracking capabilities of a hybrid pixel detector with CdTe-sensor layer for a possible use in a neutrinoless double beta decay experiment. Eur. Phys. J. C 73, 2374 (2013).
Que, W. & Rowlands, J. A. X-ray photogeneration in amorphous selenium: geminate versus columnar recombination. Phy. Rev. B 51, 10500–10507 (1995).
Klein, C. A. Bandgap dependence and related features of radiation ionization energies in semiconductors. J. Appl. Phys. 39, 2029–2038 (1968).
Náfrádi, B., Náfrádi, G., Forró, L. & Horváth, E. Methylammonium lead iodide for efficient X-ray energy conversion. J. Phys. Chem. C 119, 25204–25208 (2015).
Besleaga, C. et al. Iodine migration and degradation of perovskite solar cells enhanced by metallic electrodes. J. Phys. Chem. Lett. 7, 5168–5175 (2016).
Schieber, M. et al. Theoretical and experimental sensitivity to X-rays of single and polycrystalline HgI2 compared with different single-crystal detectors. Nucl. Instrum. Methods Phys. Res. Sect. A 458, 41–46 (2001).
Beer, A. C., Willardson, R. K. & Weber, E. (eds) Semiconductors for Room Temperature Nuclear Detector Applications Vol. 43 (Academic, 1995).
Belas, E. et al. Reduction of inclusions in (CdZn)Te and CdTe:In single crystals by post-growth annealing. J. Electron. Mater. 37, 1212–1218 (2008).
Liu, Y. et al. Two-inch-sized perovskite CH3NH3PbX3 (X = Cl, Br, I) crystals: growth and characterization. Adv. Mater. 27, 5176–5183 (2015).
Zhou, J., Chu, Y. & Huang, J. Photodetectors based on two-dimensional layer-structured hybrid lead iodide perovskite semiconductors. ACS Appl. Mater. Interfaces 8, 25660–25666 (2016).
Acknowledgements
The Cluster of Excellence Engineering of Advanced Materials (EAM) at the FAU University Erlangen and the Gradko 1896 ‘in situ Microscopy’ (DFG) is acknowledged for support. The authors thank C.O. Quiroz and M. Salvador for reading the manuscript.
Author information
Authors and Affiliations
Contributions
S.S., R.F., G.J.M., T.M., O.S., M.R. and S.F.T. performed the electrical characterization under X-ray exposure at the Siemens Healthineers Technology Center. I.L. and S.S. synthesized the MAPbI3 single crystals and microcrystals. H.C. helped with processing of the X-ray detectors. S.S., A.O. and G.M. performed TOF experiments. B.M. and P.F. carried out the mechanical investigations. R.H. interpreted the XRD data. S.S. and S.G. performed the SEM investigation. G.J.M. wrote the manuscript. M.G., W.H., G.A. and C.J.B. initiated and supervised the work. All authors reviewed the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary information
Supplementary information (PDF 3616 kb)
Rights and permissions
About this article
Cite this article
Shrestha, S., Fischer, R., Matt, G. et al. High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers. Nature Photon 11, 436–440 (2017). https://doi.org/10.1038/nphoton.2017.94
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nphoton.2017.94