[go: up one dir, main page]
More Web Proxy on the site http://driver.im/ skip to main content
research-article

Hybrid optimization algorithm for estimating soil parameters of spoil hopper deposition model for trailing suction hopper dredgers

Published: 10 January 2024 Publication History

Abstract

Trailing suction hopper dredger is a kind of hydraulic dredger, it has the characteristics of self-propelled, selfloading, self-dredging, self-unloading, it is the main force in dredging and blowing works, it is widely used in the world, it can be said that where there is a big dredging project where there is a trailing suction hopper dredger’s figure. The loading optimization process of trailing suction hopper dredger contains a lot of dredging parameters related to soil type, and the soil type under different working conditions is not very clear. In this study, we present a hybrid optimization technique based on simulated annealing and multi-population genetic algorithm to enhance the loading efficiency of a trailing suction hopper dredger and to examine the variation of dredged soil parameters. The soil parameters of the spoil hopper deposition model were estimated using this hybrid optimization algorithm. The experimental results show that the soil parameters are successfully estimated and verified by our measured construction data of a trailing suction hopper dredger. In addition, our proposed method has the highest accuracy of soil parameter estimation, the fastest algorithm convergence, and excellent robustness compared to the other three intelligent optimization methods. In addition, our method successfully avoids the phenomenon of premature convergence that usually occurs in traditional genetic algorithms, and the parameters show strong adaptability to different vessels under the same dredging area.

References

[1]
Bai S., Li M., Song L., Ren Q., Qin L. and Fu J., Productivity analysis of trailing suction hopper dredgers using stacking strategy, Automat Constr 122 (2021). https://doi.org/10.1016/j.autcon.2020.103470.
[2]
Camp T., A study of the rational design of settling tanks, Sewage Works J 8 (1936), 742–758.
[3]
Yagi T., Sedimentation effects of soil in hopper, World Dredging Conference III 1970.
[4]
Vlasblom W. and Miedema S., A theory for determining sedimentation and overflow losses in hoppers, World Dredging Conference XIV 1995.
[5]
Miedema S. and Vlasblom W., Theory for hopper sedimentation, TAMU WEDA Conference 1996.
[6]
Ooijens S., Adding dynamics to the camp model for the calculation of overflow losses, Terra Et Aqua 76 (1999), 12–21.
[7]
Ooijens S., Gruijter A., Nieuwenhuijzen A. and Vandycke S., Research on hopper settlement using large-scale modeling, In Proceedings of the CEDA Dredging Days 2001 (2001).
[8]
Rhee C., Numerical simulation of the sedimentation process in a trailing suction hopper dredge, WO-DCON XVI 2001.
[9]
Rhee C., Modelling the sedimentation process in a trailing suction hopper dredger, Terra Et Aqua 86 (2002), 18–27.
[10]
Rhee C., On the sedimentation process in a trailing suction hopper dredger. Doctoral thesis, Delft University of Technology, South Holland Province, 2002.
[11]
Braaksma J., Babuska R. and Klaassens J., A computationally efficient model for predicting overflow mixture density in a hopper dredger, Terra Et Aqua 106 (2007), 10–28.
[12]
Miedema S., The effect of the bed rise velocity on the sedimentation process in hopper dredges, World Dredging Conference XIX 10 (2010), 10–31.
[13]
Hao Y., Hong G. and Wang C., Simulation of deposition and scour of non-cohesive sediment in full loading process of TSHD, Port Waterway Eng 12 (2012), 119–125. https://doi.org/10.16233/j.cnki.issn1002-4972.2012.12.043.
[14]
Decrop B., De M., Toorman E. and Sas M., A parameter model for dredge plume sediment source terms, Ocean Dynam 67 (2017), 137–146. https://doi.org/10.1007/s10236-016-1017-0.
[15]
Chen Q., He Y., Xiong T., Li M. and Liu W., Study on the dynamic characteristics of the overflow advection and diffusion of trailing suction hopper dredgers based on CFD, Ocean Eng (2022), 252. https://doi.org/10.1016/j.oceaneng.2022.111263.
[16]
Braaksma J., Model-based control of hopper dredgers. Doctoral thesis, Delft University of Technology, South Holland Province, 2008.
[17]
Su Z., Yuan W., Lecture notes in electrical engineering, Springer Verlag: Berlin, Germany, (2016), 811–815.
[18]
Stano P.M., Tilton A.K. and Babuska R., Estimation of the soil-dependent time-varying parameters of the hopper sedimentation model: The FPF versus the BPF, Control Eng Pract 24 (2014), 67–78. https://doi.org/10.1016/j.conengprac.2013.11.005.
[19]
Stano P.M., Nonlinear state and parameter estimation for hopper dredgers. Doctoral thesis, Delft University of Technology. South Holland Province, 2013.
[20]
Stano P., Lendek Z., Braaksma J., Babuska R., de Keizer C. and den Dekker A.J., Parametric bayesian filters for nonlinear stochastic dynamical systems: a survey, IEEE T Cybernetics 43 (2013), 1607–1624. https://doi.org/10.1109/TSMCC.2012.2230254.
[21]
Su Z., Zhang X., Yao Y., Zhu D. and Fu J., Mathematic modeling and CFD simulation of the sedimentation process in a TSHD, Mar Georesour Geotec, 2022. https://doi.org/10.1080/1064119X.2022.2059421.
[22]
Sape M., Introduction dredging engineering: oe4607. Delft University of Technology Press: Delft, Netherlands, (2015), 215–262.
[23]
Mafarja M. and Mirjalili S., Hybrid whale optimization algorithm with simulated annealing for feature selections, Neurocomputing 260 (2017), 302–312. https://doi.org/10.1016/j.neucom.2017.04.053.
[24]
Shi X., Long W., Li Y. and Deng D., Multi-population genetic algorithm with ER network for solving flexible job shop scheduling problems, Plos One (2020), 15. https://doi.org/10.1371/journal.pone.0233759.
[25]
Shishido H.Y., Estrella J.C., Motta Toledo C.F. and Arantes M.S., Genetic-based algorithms applied to a workflow scheduling algorithm with security and deadline constraints in clouds, Computers & Electrical Engineering 69 (2018), 378–394. https://doi.org/1016/j.compeleceng.2017.12.004.
[26]
Xu G., Zhao H., Huang Z., Optimization methods and their MATLAB implementation. Beijing University of Aeronautics and Astronautics Press: Beijing, China, (2018), 199–208.
[27]
Gholinezhad H. and Torabi S., Research on multi-user air cargo route selection based on improved genetic algorithm, J Intell Fuzzy Syst 38 (2020), 39–46. https://doi.org/10.3233/JIFS-179378.
[28]
Li H., Wang D., Zhou M., Fan Y. and Xia Y., Multi-swarm co-evolution based hybrid intelligent optimization for bi-objective multi-workflow scheduling in the cloud, IEEE T Parall Distr 33 (2022), 2183–2197. https://doi.org/10.1109/TPDS.2021.3122428.
[29]
Zhang X., Zou Z., Guo H. and Yin J., Wavelet denoising method with a novel wavelet threshold function applied in enoising ship maneuvering test data, Indian J Geo-Mar Sci 46 (2017), 1780–1783.

Recommendations

Comments

Please enable JavaScript to view thecomments powered by Disqus.

Information & Contributors

Information

Published In

cover image Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology
Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology  Volume 46, Issue 1
2024
2936 pages

Publisher

IOS Press

Netherlands

Publication History

Published: 10 January 2024

Author Tags

  1. Trailing suction hopper dredger
  2. spoil hopper deposition model
  3. simulated annealing and multi-population genetic algorithm
  4. soil parameters estimation

Qualifiers

  • Research-article

Contributors

Other Metrics

Bibliometrics & Citations

Bibliometrics

Article Metrics

  • 0
    Total Citations
  • 0
    Total Downloads
  • Downloads (Last 12 months)0
  • Downloads (Last 6 weeks)0
Reflects downloads up to 05 Jan 2025

Other Metrics

Citations

View Options

View options

Media

Figures

Other

Tables

Share

Share

Share this Publication link

Share on social media