More Web Proxy on the site http://driver.im/

research-article

Service Oriented Integration of Distributed Heterogeneous IT Systems in Production Engineering Using Information Standards and Linked Data

Authors:

Navid Shariat Zadeh,

Gunilla Sivard Academic Editor:

Feng XiaoAuthors Info & Claims

Modelling and Simulation in Engineering, Volume 2017

https://doi.org/10.1155/2017/9814179

Published: 01 January 2017 Publication History

Abstract

While design of production systems based on digital models brings benefits, the communication of models comes with challenges since models typically reside in a heterogeneous IT environment using different syntax and semantics. Coping with heterogeneity requires a smart integration strategy. One main paradigm to integrate data and IT systems is to deploy information standards. In particular, ISO 10303 STEP has been endorsed as a suitable standard to exchange a wide variety of product manufacturing data. One the other hand, service-oriented tool integration solutions are progressively adopted for the integration of data and IT-tools, especially with the emergence of Open Services for Lifecycle Collaboration whose focus is on the linking of data from heterogeneous software tools. In practice, there should be a combination of these approaches to facilitate the integration process. Hence, the aim of this paper is to investigate the applications of the approaches and the principles behind them and try to find criteria for where to use which approach. In addition, we explore the synergy between them and consequently suggest an approach based on combination of them. In addition, a systematic approach is suggested to identify required level of integrations and their corresponding approaches exemplified in a typical IT system architecture in Production Engineering.

References

[1]

M. Törngren, A. Qamar, M. Biehl, F. Loiret, and J. El-khoury, “Integrating viewpoints in the development of mechatronic products,” Mechatronics, vol. 24, no. 7, pp. 745–762, 2014.

[2]

N. Ide and J. Pustejovsky, “What does interoperability mean, anyway? Toward an operational definition of interoperability,” in Proceedings of the 2nd International Conference on Global Interoperability for Language Resources (ICGL '10), Hong Kong, 2010, http://www.cs.vassar.edu/~ide/papers/ICGL10.pdf.

[3]

N. Shariatzadeh, Manufacturing process specification [Licentiate thesis], Department of Industrial Engineering, Royal Institute of Technology, Stockholm, Sweden, 2014.

[4]

N. Shariatzadeh, L. Lindberg, and G. Sivard, “Rapid production changes through the coordination of factory layout models and activities,” Journal of Applied Mechanical Engineering, vol. 2, article no. 126, 2013.

[5]

G. Sivard, “Digital factory building blocks,” project within FFI Sustainable production technology, http://www.vinnova.se/PageFiles/751290057/2009-00996_publikrapport_EN.pdf.

[6]

T. Kjellberg, A. Von Euler-Chelpin, M. Hedlind, M. Lundgren, G. Sivard, and D. Chen, “The machine tool model—a core part of the digital factory,” CIRP Annals—Manufacturing Technology, vol. 58, no. 1, pp. 425–428, 2009.

[7]

M. Hedlind, Model driven process planning for machining [Ph.D. thesis], KTH, School of Industrial Engineering and Management (ITM), Production Engineering, Stockholm, Sweden, 2013.

[8]

Y. Li, M. Hedlind, and T. Kjellberg, “Implementation of kinematic mechanism data exchange based on STEP,” in Proceedings of the CIRP 7th International Conference on Digital Enterprise Technology, September 2011, https://www.academia.edu/24270742/IMPLEMENTATION_OF_KINEMATIC_MECHANISM_DATA_EXCHANGE_BASED_ON_STEP.

[9]

A. von Euler-Chelpin, Information modelling for the manufacturing system life cycle [Ph.D. thesis], Royal Institute of Technology (KTH), School of Industrial Engineering and Management, Stockholm, Sweden, 2008.

[10]

P. Falkman, J. Nielsen, B. Lennartson, and A. von Euler-Chelpin, “Generation of STEP AP214 models from discrete event systems for process planning and control,” IEEE Transactions on Automation Science and Engineering, vol. 5, no. 1, pp. 113–126, 2008.

[11]

ISO 10303:242, “Industrial automation systems and integration—product data representation- and exchange—part 242: managed model-based 3D engineering,” I. TS, 184/SC4184, 2012.

[12]

ISO 10303-214, “Industrial automation systems and integration—product data representation and exchange—part 214: application protocol: core data for automotive mechanical design processes,” TS, 184/SC4184, 2010.

[13]

ISO 10303:214, “Industrial automation systems and integration—product data representation- and exchange—ARM index,” I. TS, 184/SC4184, 2009.

[14]

ISO 10303:214, “Industrial automation systems and integration—product data representation- and exchange—AIM index,” I. TS, 184/SC4184, 2009.

[15]

ISO, ISO 10303-239 ISO/TC184/SC4: ISO 10303-239: Industrial Automation Systems and Integration—Product Data Representation and Exchange—Part 239: Application Protocol: Product Life Cycle Support, I. TS 184/SC4184, 2nd edition, 2012.

[16]

“ISO 10303-41 Industrial automation systems and integration-product data representation and exchange—part 41: integrated generic resource: Fundamentals of product description and support,” Geneva: I. TS 184/SC4184, 2005.

[17]

N. Shariatzadeh, G. Sivard, and L. Lindberg, “An approach for manufacturing process representation in product lifecycle management,” Key Engineering Materials, vol. 572, pp. 239–244, 2013.

[18]

OSLC Core Specification Workgroup, “OSLC core specification version 2.0,” Technical report: Open Services for Lifecycle Collaboration, 2010.

[19]

OASIS OSLC, 2015, http://www.oasis-oslc.org/.

[20]

A. Ryman, Ryman A. Linked Data, RDF, and OSLC Resource Shapes: Define REST API Contracts for RDF Resource Representations, 2015.

[21]

T. Berners-Lee, “Linked data design issues,” December 2009, https://www.w3.org/DesignIssues/LinkedData.html.

[22]

OSLC core, 2016, https://tools.oasis-open.org/version-control/svn/oslc-core/trunk/specs/oslc-core.html.

[23]

Open-services.net. OSLC Primer—Open Services for Lifecycle Collaboration, 2015, http://open-services.net/resources/tutorials/oslc-primer/.

[24]

ISO, ISO 10303-21: Industrial Automation Systems and Integration-Product Data Representation and Exchange—Part 21: Implementation Methods: Clear Text Encoding of the Exchange Structure, International Standards Organization (ISO), Geneva, Switzerland, 2002.

[25]

“OASIS PLCS TC, DEXLIB for PLCS, Review,” 2016 http://www.plcs.org/plcslib/plcslib/sys/dex_index_base.html.

[26]

OASIS PLCS TC, “Templates,” 2016, http://www.plcs.org/plcslib/plcslib/sys/template_index_base.html.

[27]

OASIS PLCS TC, Reference data library, http://www.plcs.org/plcslib/plcslib/sys/refdata_index_base.html.

[28]

ISO 10303-41: Industrial Automation Systems and Integration-Product Data Representation and Exchange—Part 41: Integrated Generic Resource: Fundamentals of Product Description and Support, International Standards Organization (ISO), Geneva, Switzerland, 2005.

[29]

“OSLC Product Definition 1.1.” http://open-services.net/specifications/product-definition-1.1/.

[30]

I. Ishaq, D. Carels, G. Teklemariam, J. Hoebeke, F. Abeele, E. Poorter, I. Moerman, and P. Demeester, “IETF standardization in the field of the internet of things (IoT): a survey,” Journal of Sensor and Actuator Networks, vol. 2, no. 2, pp. 235–287, 2013.

[31]

W. Yang and X. Xu, “Modelling machine tool data in support of STEP-NC based manufacturing,” International Journal of Computer Integrated Manufacturing, vol. 21, no. 7, pp. 745–763, 2008.

Digital Library

[32]

ISO/CD 15531-1(2010), Industrial Automation System and Integration—Industrial Manufacturing Management Data: Part 1: General Overview, ISO/TC184/SC4/JWG8 N228: ISO/CD 15531-1, 2004.

[33]

ISO, ISO/CD 15531-43, ISO/TC184/SC4/JWG8 N228: ISO/CD 15531-43: Industrial Automation System and Integration-Manufacturing Management Data Exchange: Part 43: Manufacturing Flow Management Data: Data Model for Flow Monitoring and Manufacturing Data, ISO, Geneve, Switzerland, 2006.

[34]

“ISO/CD 15531-44, ISO/TC184/SC4/JWG8 N228: ISO/CD 15531-44: Industrial automation system and integration—Manufacturing management data exchange: Part 44: Information modelling for shop floor data acquisition,” 2010.

[35]

A. Euler-Chelpin, Information modelling for the manufacturing system life cycle [Ph.D. thesis], Royal Institute of Technology (KTH), Stockholm, Sweden, 2008.

[36]

ISO, “Industrial automation systems and integration—product data representation and exchange—part 22: implementation methods: standard data access interface,” ISO, 10303-22, International Standards Organization (ISO), Geneva, Switzerland, 1998.

[37]

ISO 10303-27 Industrial Automation Systems and Integration—Product Data Representation and Exchange—Part 27: Implementation Methods: Java TM Programming Language Binding to the Standard Data Access Interface with Internet/Intranet Extensions, International Standards Organization (ISO), Geneva, Switzerland, 2000.

[38]

Y.-T. T. Lee, “A Journey in standard development: the core manufacturing simulation data (CMSD) information model,” Journal of Research of the National Institute of Standards and Technology, vol. 120, pp. 270–279, 2015.

[39]

ISA, “ISA95: Enterprise-control system integration, part 1: models and terminology,” ISA Standard, ANSI/ISA-95-2010, 2010.

[40]

N. Shariatzadeh, L. Lindberg, and G. Sivard, “Rapid production changes through the coordination of factory layout models and activities,” Journal of Applied Mechanical Engineering, vol. 2, article 126, 2013.

[41]

P. Fettke and P. Loos, Reference Modeling for Business Systems Analysis, IGI Global, Saarbrucken, Germany, 2007.

[42]

A. Tolk, S. Y. Diallo, I. O. Ryzhov, L. Yilmaz, S. Buckley, and J. A. Miller, Eds., “Using the Structured Analysis and Design technique (SADT) in simulation conceptual modelling,” in Proceedings of the Winter Simulation Conference, 2014.

[43]

G. Sivard, N. Shariatzadeh, and L. Lindberg, “Engineering innovation factory,” in Proceedings of the 8th International Conference on Digital Enterprise Technology DET, 2014.

[44]

IFC 2x3, buildingSMART international, 2011, http://www.buildingsmart.com.

[45]

“ IFC 2x3 ISO/PAS 16739,” buildingSMART international, 2011 http://www.buildingsmart.com.

[46]

Royal Institute of Technology (KTH) Research Concept Vehicle (RCV), https://www.itrl.kth.se/research/itrl-labs/rcv-1.476469.

[47]

N. Shariatzadeh, G. Sivard, and D. Chen, “Software evaluation criteria for rapid factory layout planning, design and simulation,” Procedia CIRP, vol. 3, pp. 299–304, 2012.

[48]

N. Shariatzadeh, G. Sivard G, and M. Hedlind M, “Material flow data representation and integration based on STEP,” Internetworking Indonesia Journal, vol. 5, no. 1, pp. 11–19, 2013, http://www.internetworkingindonesia.org/Issues/Vol5-No1-B-2013/iij_vol5_no1_b_2013_shariatzadeh.pdf.

[49]

B. Rick, ActiveX LabVIEW Advanced Programming Techniques, CRC Press LLC, Boca Raton, Fla, USA, 2001, http://www.uni-miskolc.hu/~amper/progs/labview/manual%20-%20labview%20advanced%20programming%20techniques%20%28bitter%20et%20al%29.pdf.

Cited By

Tripathy AChevuri RTran TAcharya SDeventer JPaniagua CDelsing J(2024)Digital Twin-based Condition Monitoring with Distributed Data Mapping of OPC UA and ISO 10303 STEP StandardProceedings of the 4th Eclipse Security, AI, Architecture and Modelling Conference on Data Space10.1145/3685651.3685653(57-65)Online publication date: 22-Oct-2024
https://dl.acm.org/doi/10.1145/3685651.3685653
Basso FSoares Ferreira BTorres RFrantz RKreutz DBernardino Mde Macedo Rodrigues EHong JLanperne MPark JCerny TShahriar H(2023)Model-Driven Integration and the OSLC Standard: a Mapping of Applied StudiesProceedings of the 38th ACM/SIGAPP Symposium on Applied Computing10.1145/3555776.3577761(763-770)Online publication date: 27-Mar-2023
https://dl.acm.org/doi/10.1145/3555776.3577761

Index Terms

Service Oriented Integration of Distributed Heterogeneous IT Systems in Production Engineering Using Information Standards and Linked Data

Index terms have been assigned to the content through auto-classification.

Recommendations

Service Oriented Java Business Integration: Enterprise Service Bus integration solutions for Java developers
Automatic service composition with heterogeneous service-oriented architectures
ICOST'10: Proceedings of the Aging friendly technology for health and independence, and 8th international conference on Smart homes and health telematics

Service-Oriented Architecture is widely used to program pervasive spaces such as Smart Homes because of its capabilities to handle dynamic and heterogeneous environments. It is often the case that the services required are designed and implemented using ...
SOI (Service Oriented Integration) and SIMM (Service Integration Maturity Model An Analysis
SERVICES '10: Proceedings of the 2010 6th World Congress on Services

The constellation of SOA entities encompasses a triplet of Service consumer/provider and an optional registry. In the normal style, the service provider (“Service”) is instantiated and the details are stored in a registry. Service consumers seeking the ...

Comments

Please enable JavaScript to view thecomments powered by Disqus.

Information & Contributors

Information

Published In

cover image Modelling and Simulation in Engineering

Modelling and Simulation in Engineering Volume 2017, Issue

2017

300 pages

ISSN:1687-5591

EISSN:1687-5605

Issue’s Table of Contents

Copyright © 2017 Navid Shariat Zadeh et al.

This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Publisher

Hindawi Limited

London, United Kingdom

Publication History

Published: 01 January 2017

Qualifiers

Research-article

Contributors

Other Metrics

View Article Metrics

Bibliometrics & Citations

Bibliometrics

Article Metrics

2
Total Citations
View Citations
0
Total Downloads

Downloads (Last 12 months)0
Downloads (Last 6 weeks)0

Reflects downloads up to 03 Mar 2025

Other Metrics

View Author Metrics

Citations

Cited By

Tripathy AChevuri RTran TAcharya SDeventer JPaniagua CDelsing J(2024)Digital Twin-based Condition Monitoring with Distributed Data Mapping of OPC UA and ISO 10303 STEP StandardProceedings of the 4th Eclipse Security, AI, Architecture and Modelling Conference on Data Space10.1145/3685651.3685653(57-65)Online publication date: 22-Oct-2024
https://dl.acm.org/doi/10.1145/3685651.3685653
Basso FSoares Ferreira BTorres RFrantz RKreutz DBernardino Mde Macedo Rodrigues EHong JLanperne MPark JCerny TShahriar H(2023)Model-Driven Integration and the OSLC Standard: a Mapping of Applied StudiesProceedings of the 38th ACM/SIGAPP Symposium on Applied Computing10.1145/3555776.3577761(763-770)Online publication date: 27-Mar-2023
https://dl.acm.org/doi/10.1145/3555776.3577761

View Options

View options

Figures

Tables

Media

View Issue’s Table of Contents