History and perspective of simulation in manufacturing
Article No.: 24, Pages 1 - 13
Abstract
Manufacturing systems incorporate many semi-independent, yet strongly interacting processes, usually exhibiting some stochastic behavior. As a consequence, overall system behavior, in the long run but also in the short run, is very difficult to predict. Not surprisingly, both practitioners and academics recognized in the 1950's the potential value of discrete event simulation technology in supporting manufacturing system decision-making. This short history is one perspective on the development and evolution of discrete event simulation technology and applications, specifically focusing on manufacturing applications. This assessment is based on an examination of the literature, our own experiences, and interviews with leading practitioners. History is interesting, but it's useful only if it helps us see a way forward, so we offer some opinions on the state of the research and practice of simulation in manufacturing, and the opportunities to further advance the field.
References
[1]
Antonellli, C. J., R. A. Volz, and T. N. Mudge. 1986. "Hierarchical Decomposition and Simulation of Manufacturing Cells Using Ada". Simulation: 141--152.
[2]
Banks, J., S. Jain, S. Buckley, P. Lendermann, and M. Manivannan. 2002. "Opportunities for Simulation in Supply Chain Management". In Proceedings of the 2002 Winter Simulation Conference, edited by E. Yücesan, C.-H. Chen, J. L. Snowdon, and J. M. Charnes, 1652--1658. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[3]
Barton, R. R. 1998. "Simulation Metamodels". In Proceedings of the 1998 Winter Simulation Conference, edited by D. J. Medeiros, E. F. Watson, J. S. Carson and M. S. Manivannan, 167--174. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[4]
Bouché, P., and C. Zanni-Merk. 2010. "Improving the Performance of Production Lines with an Expert System Using a Stochastic Approach". Simulation:363--383.
[5]
Chong, C. S., A. I. Sivakumar, M. Y. H. Low, and K. L. Gay. 2006. "A Bee Colony Optimization Algorithm to Job Shop Scheduling". In Proceedings of the 2006 Winter Simulation Conference, edited by L. F. Perrone, F. P. Wieland, J. Liu, B. G. Lawson, D. M. Nicol, and R. M. Fujimoto, 1954--1961. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[6]
Conway, R. W., B. M. Johnson, and W. L. Maxwell. 1959. "Some Problems of Digital Systems Simulation". Management Science:92--110.
[7]
Conway, R. W., B. M. Johnson, and W. L. Maxwell. 1958. "A Queue Network Simulator for for the IBM 650 and Burroughs 220". Communications of the ACM:20--23.
[8]
Crawford, E. W., I. W. Percy-Robb, and B. Clark. 1997. "Task Trees - A Hierarchical Structure for Modelling Complex Jobshops". Simulation:263--276.
[9]
Cunningham, S. P., and J. G. Shanthikumar. 1996. "Empirical Results on the Relationship between Die Yield and Cycle Time in Semiconductor Wafer Fabrication". IEEE Transactions on Semiconductor Manufacturing 9 (2).
[10]
Davis, D. A., and D. Pegden. 1987. "Introduction to SIMAN". In Proceedings of the 1987 Winter Simulation Conference, edited by A. Thesen, H. Grant, and W. D. Kelton, 93--101. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[11]
De Meter, E. C., and M. P. Deisenroth. 1991. "BIBSS: A Model Specification Framework for Multi-Stage, Manufacturing System Design". Simulation:413--421.
[12]
del Rio Vilas, D., F. Longo, and N. R. Monteil. 2012. "A General Framework for the Manufacturing Workstation Design Optimization: A Combined Ergonomic and Operational Approach". Simulation:306--329.
[13]
Dengiz, B., and O. Belgin. 2014. "Simulation Optimization of a Multi-Stage Multi-Product Paint Shop Line with Response Surface Methodology". Simulation:265--274.
[14]
Fan, I. S., and P. J. Sackett. 1988. "A Prolog Simulator for Interactive Flexible Manufacturing Systems Control". Simulation:239--247.
[15]
Farahmand, K., and A. F. Garza Martinez. 1996. "Simulation and Animation of the Operation of a Fast Food Restaurant". In Proceedings of the 1996 Winter Simulation Conference, edited by J. M. Charnes, D. J. Morrice, D. T. Brunner, and J. J. Swain, 1264--1271. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[16]
Ford, D. R., and B. J. Schroer. 1987. "An Expert Manufacturing Simulation System". Simulation:193--200.
[17]
Fowler, J. W., and O. Rose. 2004. "Grand Challenges in Modeling and Simulation of Complex Manufacturing Systems". Simulation:469--476.
[18]
Galvao, J. R., P. G. Martins, and M. R. Gomes. 2000. "Modeling Reality with Simulation Games for a Cooperative Learning". In Proceedings of the 2000 Winter Simulation Conference, edited by J. A. Joines, R. R. Barton, K. Kang, and P. A. Fishwick, 1692--1698. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[19]
Gan, B.-P., S. Jain, S. J. Turner, W. Cai, and W.-J. Hsu. 2000. "Manufacturing Supply Chain Management: Distributed Supply Chain Simulation across Enterprise Boundaries". In Proceedings of the 2000 Winter Simulation Conference, edited by J. A. Joines, R. R. Barton, K. Kang, and P. A. Fishwick, 1245--1251. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[20]
Harling, J. 1958. "Simulation Techniques in Operations Research - A Review". Operations Research:307--319.
[21]
Heilala, J., S. Vatanen, H. Tonteri, J. Montonen, S. Lind, B. Johansson, and J. Stahre. 2008. "Simulation-Based Sustainable Manufacturing System Design". In Proceedings of the 2008 Winter Simulation Conference, edited by S. J. Mason, R. R. Hill, L. Mönch, O. Rose, T. Jefferson, and J. W. Fowler, 1922--1930. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[22]
Ingalls, R. G. 1998. "The Value of Simulation in Modeling Supply Chains". In Proceedings of the 1998 Winter Simulation Conference, edited by D. J. Medeiros, E. F. Watson, J. S. Carson and M. S. Manivannan, 1371--1375. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[23]
Jackson, J. R. 1957. "Simulation Researech on Job Shop Production". Naval Research Logistics:287--295.
[24]
Kateel, G. P., M. Kamath, and D. B. Pratt. 1996. "An Overview of CIM Enterprise Modeling Methodologies". In Proceedings of the 1996 Winter Simulation Conference, edited by J. M. Charnes, D. J. Morrice, D. T. Brunner, and J. J. Swain, 1000--1007. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[25]
Ketcham, M. G., R. E. Shannon, and G. L. Hogg. 1989. "Information Structures for Simulation Modeling of Manufacturing Systems". Simulation:59--67.
[26]
Kuratani, Y., and R. T. Nelson. 1960. "A Pre-Computational Report on Job Shop Simulation Research". Journal of the Operations Research Society of Japan:145--183.
[27]
Kwon, O. B. 1996. "An Object-Oriented Approach to Simulation Model Construction for CIM Systems". Simulation:93--105.
[28]
Law, A. M., and M. G. McComas. 2002. "Simulation-Based Optimization". In Proceedings of the 2002 Winter Simulation Conference, edited by E. Yücesan, C.-H. Chen, J. L. Snowdon, and J. M. Charnes, 41--44. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[29]
Mackulak, G., J. Cochran, and P. Savory. 1994. "Ascertaining Important Features for Industrial Simulation Environments". Simulation:211--221.
[30]
Madisetti, V., J. Walrand, and D. Messerschmitt. 1988. "WOLF: A Rollback Algorithm for Optimistic Distributed Simulation Systems". In Proceedings of the 1988 Winter Simulation Conference, edited by M. Abrams, P. Haigh, and J. Comfort, 296--305. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[31]
McCarthy, B. M., and R. Stauffer. 2001. "Enhancing Six Sigma through Simulation with iGrafx Process for Six Sigma". In Proceedings of the 2001 Winter Simulation Conference, edited by B. A. Peters, J. S. Smith, D. J. Medeiros, and M. W. Rohrer, 1241--1247. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[32]
McLean, C., and Frank Riddick. 2000. "The IMS Mission Architecture for Distributed Manufacturing Simulation". In Proceedings of the 2000 Winter Simulation Conference, edited by J. A. Joines, R. R. Barton, K. Kang, and P. A. Fishwick, 1539--1548. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[33]
Moon, D. H., H. S. Kim, and C. Song. 2005. "A Simulation Study for Implementing Color Rescheduling Storage in an Automotive Factory". Simulation: 625--635.
[34]
Narciso, M., M. Piera, and A. Guasch. 2010. "A Methodology for Solving Logistic Optimization Problems through Simulation". Simulation:369--389.
[35]
Piera, M., N. Mercedes, A. Guasch, and D. Riera. 2004. "Optimization of Logistic and Manufacturing Systems through Simulation: A Colored Petri Net-Based Methodology". Simulation:121--129.
[36]
Pillai, D. 1989. "Designing Material Handling Systems for Large Scale Wafer Fabrication Automation". In Proceedings of SME Conference on Clean Room Automation.
[37]
Reitman, J. 1967. "Simulation of a Manufacturing System". Simulation:311--317.
[38]
Robinson, S., and R. Brooks. 2010. "Independent Verification and Validation of an Industrial Simulation Model". Simulation:405--416.
[39]
Rohrer, M. W. 2000. "Seeing Is Believing: The Importance of Visualization in Manufacturing Simulation". In Proceedings of the 2000 Winter Simulation Conference, edited by J. A. Joines, R. R. Barton, K. Kang, and P. A. Fishwick, 1211--1216. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[40]
Roser, C., M. Nakan, and M. Tanaka. 2002. "Productivity Improvement: Shifting Bottleneck Detection". In Proceedings of the 2002 Winter Simulation Conference, edited by E. Yücesan, C.-H. Chen, J. L. Snowdon, and J. M. Charnes, 1079--1086. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[41]
Sims, M. K. 1981. "Designing a Production Line for Howizer Projectiles". Simulation: 119--124.
[42]
Smith, J. S., R. A. Wysk, D. T. Sturrock, S. E. Ramaswamy, G. D. Smith, and S. B. Joshi. 1994. "Discrete Event Simulation for Shop Floor Control". In Proceedings of the 1994 Winter Simulation Conference, edited by J. T. Dew, S. Manivannan, D. A. Sadowski, and A. F. Seila, 962--969. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[43]
Truong, T. H., and F. Azadivar. 2003. "Simulation Based Optimization for Supply Chain Configuration Design". In Proceedings of the 2003 Winter Simulation Conference, edited by S. Chick, P. J. Sánchez, D. Ferrin, and D. J. Morrice, 1268--1275. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[44]
Vieira, G. E. 2004. "Ideas for Modeling and Simulation of Supply Chains with Arena". In Proceedings of the 2004 Winter Simulation Conference, edited by R.G. Ingalls, M. D. Rossetti, J. S. Smith, and B. A. Peters, 1418--1427. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
[45]
Wilson, J. R., and D. Goldsman. 2001. "Alan Pritsker's Mulitfaceted Career:Theory, Practice, Education, Entrepreneurship, and Service". IIE Transactions 33:139--147.
[46]
Xu, T., D. H. Moon, and S. G. Baek. 2012. "A Simulatin Study Integrated with Analytic Hierarchy Process (Ahp) in an Automotive Manufacturing System". Simulation:450--463.
[47]
Young, M. L., F. Cheng, and Y. T. Leung. 2004. "Exploring the Impact of RFID on Supply Chain Dynamics". In Proceedings of the 2004 Winter Simulation Conference, edited by R.G. Ingalls, M. D. Rossetti, J. S. Smith, and B. A. Peters, 1145--1152. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, Inc.
- History and perspective of simulation in manufacturing
Recommendations
Modeling and simulation in intelligent manufacturing
Highlights- Reviewing and summarizing the research and application status of modeling and simulation technology in manufacturing.
AbstractWith the continuous deepening of the application of information technology in the manufacturing field, the informatization of manufacturing systems has developed from unit digital manufacturing to integrated networked manufacturing, ...
Core Manufacturing Simulation Data-a manufacturing simulation integration standard: overview and case studies
Standard representations for information entities common to manufacturing simulation could help reduce the costs associated with simulation model construction and data exchange between simulation and other manufacturing applications. This would make ...
Comments
Please enable JavaScript to view thecomments powered by Disqus.Information & Contributors
Information
Published In
December 2017
4389 pages
ISBN:9781538634271
Sponsors
Publisher
IEEE Press
Publication History
Published: 03 December 2017
Check for updates
Qualifiers
- Research-article
Conference
WSC '17
Sponsor:
Acceptance Rates
Overall Acceptance Rate 3,413 of 5,075 submissions, 67%
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 56Total Downloads
- Downloads (Last 12 months)7
- Downloads (Last 6 weeks)0
Reflects downloads up to 21 Dec 2024
Other Metrics
Citations
View Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign in