[go: up one dir, main page]
More Web Proxy on the site http://driver.im/
For Libraries For Publication Open Access Downloads About Us Contact Us
Paper Titles
The Calculation Methods of Markstein Numbers and Laminar Burning Velocities for Hydrogen-Air Premixed Mixtures in Constant Volume Combustion Bomb
p.382
Investigating Solutions for Injection Molding Weld Line Defects
p.386
The Damping Properties of the Natural Rubber Filled with ZnO
p.390
The Development and Application on Composite Resin Substituted for Cement Slurry
p.395
The Effect of Directionally Chilled Microstructure on Hypereutectic High-Chromium White Cast Iron
p.399
The Effect of Weld Geometry on the Stiffness of I-Core Steel Sandwich Plate
p.404
The Feasibility Research on the New Material Used in Electrical Fittings
p.410
The High Temperature Oxidation Behavior of Hot-Dipping Aluminized Steel 0Cr18Ni10Ti
p.414
The Manufacturing Technology Research of Composite Resin Transfer Molding
p.419

The Effect of Directionally Chilled Microstructure on Hypereutectic High-Chromium White Cast Iron

Article Preview

Abstract:

This study examined the effect of fluid convection on microstructures of directionally solidified high-chromium white cast iron (ASTM A532-87 Class III) with carbon equivalents of 4.5. The iron was first melted in a high-frequency induction furnace, and then poured into a sandwiched cylindrical Furan resin sand mold. The middle part is a chilled copper mold kept cold by circulating water, enabling simultaneous directional solidification in the upper and lower zones. The microstructure thus solidified is affected by directionally chilled between these parts. Distribution of temperature in the mold during cast solidification was measured by K-type thermocouples. The measured results show that the lower zone has stronger thermal convection and faster cooling rate than the upper zone. The lower zone has smaller liquidus and solidus gradients than the upper zone.

You might also be interested in these eBooks
Frontiers of Advanced Materials and Engineering Technology II View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 912-914)

Pages:

399-403

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.912-914.399

Citation:

Cite this paper

Online since:

April 2014

Authors:

Dong Shyen Yang*, Ji Syuan Lin, Dar Jen Pen, Fang Ming Hsu

Keywords:

Carbon Equivalent, Directional Solidification, Temperature Gradient

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

Сopyright:

© 2014 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

References

[1] T. C. Zhang, D. Y. Li, Mater. Sci. and Eng. A325, p.87(2002).

Google Scholar

[2] W. S. Chang, Y. N. Pan, 2007 Conference of Taiwan Foundry Society, Hsinchu, p.203(2007).

Google Scholar

[3] R. L. Pattyn, , AFS transactions, p.161. ( 1993).

Google Scholar

[4] G. Laird, AFS Transactions, vol. 128, p.497(1992).

Google Scholar

[5] C. P. Tabrett, I. R. Sare and M. R. Ghomashohi, International. Mater. Reviews, vol. 41, No. 2, p.59. , (1996).

Google Scholar

[6] T. S. Lei, W. S. Chang, and D. S. Yang, Mater. Sci. Forum Vol. 508, (2006), p.473.

Google Scholar

[7] F. Maratray, AFS Transactions, Vol. 25, p.121. ( 1971).

Google Scholar

[8] M. McLean, Solidification and casting of metals, International conference on solidification, p.65(July, 1977, London).

Google Scholar

© 2024 Trans Tech Publications Ltd. All rights are reserved, including those for text and data mining, AI training, and similar technologies. For open access content, terms of the Creative Commons licensing CC-BY are applied.
Scientific.Net is a registered trademark of Trans Tech Publications Ltd.