[go: up one dir, main page]
More Web Proxy on the site http://driver.im/ skip to main content
10.1145/3548608.3559258acmotherconferencesArticle/Chapter ViewAbstractPublication PagesiccirConference Proceedingsconference-collections
research-article

Analysis of Influence factors of Opening Response Time of High-pressure solenoid valve

Published: 14 October 2022 Publication History

Abstract

In order to improve the opening response time of the solenoid valve of a certain marine diesel engine, this paper analyzes the influence on the opening response time of the solenoid valve based on ANSOFT software. The results show that the opening response time of the solenoid valve can be appropriately shortened by increasing the voltage and reducing the working gap, but it still can not meet the 10ms requirement of opening time. However, the opening response time of the solenoid valve can be significantly shortened by optimizing the coil parameters under certain conditions of the solenoid valve structure parameters. Finally, a quarter coil is used to shorten the opening response time of the solenoid valve from 27.4ms to 9.2ms shortened by 66.4%, which meets the requirement of the opening response time of the solenoid of a marine diesel engine.

References

[1]
Guan C B, Mao X F.(2020) Simulation and experiment on high-speed solenoid valve based on energy recovery principle[J]. Journal of propulsion technology, 41: 668-674.
[2]
ZHAO J H, YUE P F, WEI K B.(2020) Eddy current effects on the dynamic response of high-speed solenoid valve for common rail injector[J]. International Journal of Applied Electromagnetics and Mechanics, 62: 607-618.
[3]
SUN Z Y, LI G X, WANG L.(2016) Effects of structure parameters on the static electromagnetic characteristics of solenoid valve for an electronic unit pump[J]. Energy Conversion and Management, 113: 119-130.
[4]
FAN L Y, ZHOU W, LIU P.(2018)Multi objective optimization of dynamic response of high speed solenoid valve[J]. Journal of Harbin Engineering University, 39: 53-59.
[5]
YANG K, LIU Z M, ZHOU L. (2019) Optimization design of solenoid valve for electric-controlled pressure amplifier using genetic algorithm[J]. Journal of National University of Defense Technology, 41: 56-62.
[6]
SHIN Y, LEE S, CHOI C. Shape optimization to minimize the response time of direct-acting solenoid valve [J]. Journal of Magnetics, 20: 193-200.
[7]
YIN C, ZHANG Z, SUN Y. (2015) Optimization of magnetic circuit configuration for GDI injector based on MOSA algorithm[J]. International Journal of Applied Electromagnetics and Mechanics, 49: 531-546.
[8]
LIU P, FAN L Y, ZHOU W. (2017) Dynamic performances analysis and optimization of novel high-speed electromagnetic actuator for electronic fuel injection system of diesel engine[J]. Journal of Mechanical Science and Technology, 31: 4019-4028.
[9]
Kajima T, Kawamura Y. (1995) Development of a High-Speed Solenoid Valve: Investigation of Solenoids[J]. IEEE Transactions on Industrial Electronics, 42: 1-8.
[10]
Yang Q, Zhang H G, Huang G S. (2000) A Study on the Fast Response Solenoid Valve in the Electronic Control of Diesel Engine[C]. In: 2000 FISITA World Automotive Congress.
[11]
Tao G, Chen H Y. (2002) Optimal Design of the Magnetic Field of a High-Speed Response Solenoid Valve[J]. Journal of Materials Processing Technology, 129: 555-558.
[12]
Passarini L C, Nakajima P R. (2003) Development of a High-Speed Solenoid Valve: an Investigation of the Importance of the Armature Mass on the Dynamic Response[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 25: 329-335.

Recommendations

Comments

Please enable JavaScript to view thecomments powered by Disqus.

Information & Contributors

Information

Published In

cover image ACM Other conferences
ICCIR '22: Proceedings of the 2022 2nd International Conference on Control and Intelligent Robotics
June 2022
905 pages
ISBN:9781450397179
DOI:10.1145/3548608
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]

Publisher

Association for Computing Machinery

New York, NY, United States

Publication History

Published: 14 October 2022

Permissions

Request permissions for this article.

Check for updates

Qualifiers

  • Research-article
  • Research
  • Refereed limited

Conference

ICCIR 2022

Acceptance Rates

Overall Acceptance Rate 131 of 239 submissions, 55%

Contributors

Other Metrics

Bibliometrics & Citations

Bibliometrics

Article Metrics

  • 0
    Total Citations
  • 37
    Total Downloads
  • Downloads (Last 12 months)19
  • Downloads (Last 6 weeks)1
Reflects downloads up to 15 Jan 2025

Other Metrics

Citations

View Options

Login options

View options

PDF

View or Download as a PDF file.

PDF

eReader

View online with eReader.

eReader

HTML Format

View this article in HTML Format.

HTML Format

Media

Figures

Other

Tables

Share

Share

Share this Publication link

Share on social media