Study on the influence of Taguchi melt deposition molding on tensile properties
Authors: 
HaiXiong Wang, JinHui He, YaJun LiAuthors Info & Claims
Pages 127 - 131
References
[1]
HAMBACH M, VOLKMER D. Properties of 3D-printed fiberreinforced portland cement paste [J]. Cement and Concrete Composites, 2017, 79: 62 − 79.
[2]
GIANLUCA A. Influence of meso-structure and chemical composition on FDM 3D-printed parts [J]. Composites Part B, 2017 ( 14 ) :65 − 69.
[3]
Wang Yiwei, Guo Rui, Song Yongming. The effect of infilling mode on mechanical properties, forming time, material consumption of polylactic acid by FDM[J]. China Plastics Industry, 2017, 45(3):79–82, 96.
[4]
Jia xian, Tan Shuanbin, Lei Hongchun, 3D printing process parameters on PLA compression performance[J]. Manufacturing Technology and Machine Tool, 2018(4):29–32
[5]
Dupret-Bories A, Vergez S, Meresse T, Contribution of 3D printing to mandibular reconstruction after cancer[J]. Eur Ann Otorhinolaryngol Head Neck Dis, 2018, 135 (2):133–136
[6]
KWON H J, KWON O K. Computer aided engineering (CAE) simulation for the design optimization of gate system on high pressure die casting ( HPDC) process [J]. Robotics and Computer IntegratedManufacturing, 2018( 6) : 147 − 153.
[7]
ABDULR, GUO G, JOSEPH C. Shrinkage prediction of injection molded high density polyethylene parts with taguchi /artificial neural network hybrid experimental design [J]. International Journal on Interactive Design and Manufacturing, 2020, 14( 5) : 345 − 357.
[8]
[8] TOMASONID, COLOSIOS, GIORLEOL. Design for additive manufacturing: Thermoforming mold optimization via conformal cooling channel technology [J]. Proc, Edia Manufacturing, 2020( 4) :1117- 1122.
[9]
JAEHYUNG J, DOO-MAN K, KWANGWON K. Flexible cellular solid spokes of a non-pneumatic tire [J]. Compos Struct, 2012, 94 ( 8) : 2285−2295.
[10]
Chen Yankai, Shi Yanchun, Zhang Jianhui. Influence of printing parameters on properties of fused deposition modeling ABS samples[J]. Engineering Plastics Application, 2019, 47(10):47–52.
[11]
Miguel F V. Effect of infill parameters on tensile mechanical behavior in desktop 3D printing[J]. 3D Printing and Additive Manufacturing, 2016, 3:183–192.
[12]
Yuping E. The effect of SLM process parameters on density, hardness, tensile strength and surface quality of Ti-6Al-4V[J]. Int J Adv Manuf Tech, 2018, 9:670–677.
[13]
Ebel E, Sinnemann T. Fabrication of FDM 3D objects with ABS and PLA and determination of their mechanical properties[J]. Int J Adv Manuf Tech, 2014, 11:917–923
Recommendations
Experimental study of polymer microlens fabrication using partial-filling hot embossing technique
A method to fabricate microlens arrays in polymer substrates via hot embossing is presented in this paper. The partial-filling hot embossing technique of micro cavities on a mold insert through surface tension and capillary action is proven to be an ...
Experimental characterization of transcription properties of microchannel geometry fabricated by injection molding based on Taguchi method
Microchannel is a fundamental structure in various microfluidic systems. Precise reproduction of microchannel is required to achieve reliable efficiency of microfluidic systems. In this paper, we present the parametric sensitivity study of the ...
Application of the Taguchi's design of experiments to optimize a bromine chemistry-based etching recipe for deep silicon trenches
In this article, the design of experiments (DOE) of the Taguchi method was used to optimize a deep silicon trench etching recipe in a commercial etcher, Lam Research TCP9400. A L9 orthogonal array was selected with four factors and three levels. The ...
Comments
Please enable JavaScript to view thecomments powered by Disqus.Information & Contributors
Information
Published In
July 2021
347 pages
ISBN:9781450390637
DOI:10.1145/3480571
Copyright © 2021 ACM.
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 29 October 2021
Check for updates
Author Tags
Qualifiers
- Research-article
- Research
- Refereed limited
Conference
ICIIP 2021
ICIIP 2021: 2021 6th International Conference on Intelligent Information Processing
July 29 - 31, 2021
Bucharest, Romania
Acceptance Rates
Overall Acceptance Rate 87 of 367 submissions, 24%
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 17Total Downloads
- Downloads (Last 12 months)1
- Downloads (Last 6 weeks)0
Reflects downloads up to 10 Dec 2024
Other Metrics
Citations
View Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign inFull Access
View options
View or Download as a PDF file.
PDFeReader
View online with eReader.
eReaderHTML Format
View this article in HTML Format.
HTML Format