Abstract
This paper reviews the dislocation based models that have been used until now to consider dislocation effects on the plastic deformation in the crystalline material. We separate two general strategies: discrete dislocation dynamics models that consider individual dislocations and continuum dislocation dynamics models that consider dislocation density as a state variable to analyze the plastic deformation. Since these methods are very widespread due to suggested new approaches and computational advances they need to be reviewed. The objective of this review is to introduce these methods and comparing existing results in two categories to know which method can be used to reach more accurate results for considering dislocation in crystalline metals. Seventeen papers and thesis were chosen that predicted the stress–strain curve of different crystalline material by emphasizing dislocation effect on their results. Advantages and lacks of both methods are mentioned and it is discussed which method is suitable for stress–strain prediction. It is observed that continuum dislocation dynamics methods can predict the stress–strain curves more efficiently than discreet dislocation dynamics.
Similar content being viewed by others
References
M. Kolář, M. Benes, J. Kratochvíl, P. Pauš, Acta Phys. Pol. A 134, 667 (2018)
S. Sandfeld, M. Monavari, M. Zaiser, Model. Simul. Mater. Sci. 21, 085006 (2013)
K. Sekido, T. Ohmura, T. Hara, K. Tsuzaki, Mater. Trans. 53, 907 (2012)
U.F. Kocks, A.S. Argon, M.F. Ashby, Mater Sci 19, 20 (1975)
C. Teodosiu, Fundam. Aspects Dislocation Theory 317, 837 (1970)
Y. Estrin, H. Mecking, Acta Metal. 32, 57 (1984)
M.A. Zikry, M. Kao, J. Mech. Phys. Solids 44, 1765 (1996)
R. Gasca-Neri, W.D. Nix, Acta Metal. 22, 257 (1974)
G. Regazzoni, U.F. Kocks, P. Follansbee, Acta.Metal 35, 2865 (1987)
J.P. Sethna, M.K. Bierbaum, K.A. Dahmen, C.P. Goodrich, J.R. Greer, L.X. Hayden, J.P. Kent-Dobias, E.D. Lee, D.B. Liarte, X. Ni, K. Quinn, Annu. Rev. Mater. Res. 47, 20 (2017)
F. Prinz, A. Argon, Acta Metal. 32, 1021 (1984)
Y. Estrin, L. Toth, A. Molinari, Y. Bréchet, Acta Mater. 46, 5509 (1998)
E. Nes, Prog. Mater. Sci. 41, 129 (1997)
E. Nes, K. Marthinsen, Mater. Sci. Eng. A 322, 176 (2002)
E. Nes, K. Marthinsen, Y. Brechet, Scr. Mater. 47, 607 (2002)
E. Nes, K. Marthinsen, B. Holmedal, J. Mater. Sci. Technol. 20, 1377 (2004)
P. Schall, M. Feuerbacher, M. Bartsch, U. Messerschmidt, K. Urban, Philos. Mag. Lett. 79, 785 (1999)
K. Karhausen, F. Roters, J. Mater. Process. Technol. 123, 155 (2002)
G. Prasad, M. Goerdeler, G. Gottstein, Mater. Sci. Eng. A 400, 231 (2005)
W. Nix, J. Gibeling, K. Fuchs, The Role of Long-Range Internal Back Stresses in Creep of Metals, Mechanical Testing for Deformation Model Development (ASTM International, Pennsylvania, 1982)
F. Roters, D. Raabe, G. Gottstein, Acta Mater. 48, 4181 (2000)
H. Mughbrabi, F. Ackermann, K. Herz, ed. By J. Fong, (ASTM International, Pennsylvania, 1979) p. 69
G.V. Prasad, V. Mohles, An improved dislocation density based work hardening model for al-alloys (Fachgruppe für Metallurgie und Werkstofftechnik, Aachen, 2007)
P. Gurla, Aachen University: Aachen, Germany (2007)
W.D. Nix, J.C. Gibeling, D.A. Hughes, Metall. Trans. 16, 2215 (1985)
H. Mughrabi, Mater. Sci. Eng. 85, 15 (1987)
W. Blum, P. Eisenlohr, F. Breutinger, Metall. Mater. Trans. 33, 291 (2002)
K.-S. Cheong, E.P. Busso, Acta Mater. 52, 5665 (2004)
M.E. Gurtin, L. Anand, S.P. Lele, J. Mech. Phys. Solids 55, 1853 (2007)
A. Arsenlis, D.M. Parks, J. Mech. Phys. Solids 50, 1979 (2002)
H. Gao, Y. Huang, Scr. Mater. 48, 113 (2003)
A. Ma, F. Roters, D. Raabe, Acta Mater. 54, 2169 (2006)
A. Ma, F. Roters, D. Raabe, Acta Mater. 54, 2181 (2006)
A. Ma, F. Roters, Acta Mater. 52, 3603 (2004)
F. Roters, Advanced Material Models for the Crystal Plasticity Finite Element Method: Development of a General CPFEM Framework (Fachgruppe für Materialwissenschaft und Werkstofftechnik, Aachen, 2011)
R.A. Austin, D.L. McDowell, Int. J. Plast. 27, 1 (2011)
J.T. Lloyd, J.D. Clayton, R. Becker, D.L. McDowell, Int. J. Plast. 60, 118 (2014)
D.J. Luscher, F.L. Addessio, M.J. Cawkwell, K.J. Ramos, J. Mech. Phys. Solids 98, 63 (2017)
T. Nguyen, D.J. Luscher, J.W. Wilkerson, J. Mech. Phys. Solids 108, 1 (2017)
A. Patra, D.L. McDowell, Philos. Mag. 92, 861 (2012)
Y. Estrin, H. Mecking, Scr. Mater. 27, 647 (1992)
H. Mecking, U.F. Kocks, Acta. Metal. 29, 1865 (1981)
R. Sandström, R. Lagneborg, Acta Metal. 23, 387 (1975)
E. Busso, J. Mech. Phys. Solids 48, 2333 (2000)
M. Mukherjee, U. Prahl, W. Bleck, Steel Res. Int. 81, 1102 (2010)
B. Babu, L.-E. Lindgren, Int. J. Plast. 50, 94 (2013)
X.G. Fan, H. Yang, Int. J. Plast. 27, 1833 (2011)
H. Bok, J. Choi, F. Barlat, D.W. Suh, M.G. Lee, Int. J. Plast. 58, 154 (2014)
H. Gao, Y. Huang, Int. J. Solids. Struct. 38, 2615 (2001)
N.A. Fleck, G.M. Muller, M.F. Ashby, J.W. Hutchinson, Acta Metal. 42, 475 (1994)
L. Toth, C. Gu, B. Beausir, J. Fundenberger, M. Hoffman, Acta Mater. 117, 35 (2016)
D.A. Hughes, N. Hansen, D.J. Bammann, Scr. Mater. 48, 147 (2003)
N.A. Fleck, J.W. Hutchins**on, 33, 295 (1997).
W.D. Nix, H. Gao, J. Mech. Phys. Solids 46, 411 (1998)
B. Bhushan, M. Nosonovsky, Acta Mater. 51, 4331 (2003)
M. Huang, L. Zhao, J. Tong, Int. J. Plast. 28, 141 (2012)
X. Qiu, Y. Huang, W.D. Nix, K.C. Hwang, H. Gao, Acta Mater. 49, 3949 (2001)
S. Brinckmann, T. Siegmund, Y. Huang, Int. J. Plast. 22, 1784 (2006)
R.K. Abu Al-Rub, G.Z. Voyiadjis, Int. J. Plast. 20, 1139 (2004)
G.Z. Voyiadjis, F.H. Abed, Arch. Mech. 57, 299 (2005)
G.Z. Voyiadjis, R.K.A. Al-Rub, Int. J. Solids. Struct. 42, 3998 (2005)
L. Bardella, J. Mech. Phys. Solids 54, 128 (2006)
H. Lyu, A. Ruimi, H.M. Zbib, Int. J. Plast. 72, 44 (2015)
A. Arsenlis, D.M. Parks, Acta Mater. 47, 1597 (1999)
A. Arsenlis, J. Mech. Phys. Solids 52, 1213 (2004)
L. Evers, W. Brekelmans, M. Geers, Int. J. Solids. Struct. 41, 5209 (2004)
J.D. Clayton, D.L. McDowell, D.J. Bammann, Int. J. Plast. 22, 210 (2006)
I.J. Beyerlein, C.N. Tomé, Int. J. Plast. 24, 867 (2008)
H. Lim, M.G. Lee, J.H. Kim, B.L. Adams, R.H. Wagoner, Int. J. Plast. 27, 1328 (2011)
H. Askari, J. Young, D. Field, G. Kridli, D. Li, H. Zbib, Philos. Mag. 94, 381 (2013)
H. Askari, M.R. Maughan, N. Abdolrahim, D. Sagapuram, D.F. Bahr, H.M. Zbib, Int. J. Plast. 68, 21 (2015)
D. Li, H. Zbib, X. Sun, M. Khaleel, Int. J. Plast. 52, 3 (2014)
T. Hochrainer, S. Sandfeld, M. Zaiser, P. Gumbsch, J. Mech. Phys. Solids 63, 167 (2014)
S. Sandfeld, E. Thawinan, C. Wieners, Int. J. Plast. 72, 1 (2015)
E.M. Viatkina, W.A.M. Brekelmans, M.G.D. Geers, Int. J. Solids. Struct. 44, 6030 (2007)
K. Kitayama, C.N. Tomé, E.F. Rauch, J.J. Gracio, F. Barlat, Int. J. Plast. 46, 54 (2013)
M.S. Pham, S.R. Holdsworth, K. Janssens, E. Mazza, Int. J. Plast. 47, 143 (2013)
M. Knezevic, R.J. McCabe, R.A. Lebensohn, C.N. Tomé, C. Liu, M.L. Lovato, B. Mihaila, J. Mech. Phys. Solids 61, 2034 (2013)
M. Zecevic, M. Knezevic, Int. J. Plast. 72, 200 (2015)
T. Hochrainer, M. Zaiser, P. Gumbsch, Philos. Mag. 87, 1261 (2007)
O. Bouaziz, N. Guelton, Mater. Sci. Eng. 319, 246 (2001)
S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, N. Guelton, Mater. Sci. Eng. A 387, 158 (2004)
G. Ananthakrishna, Phys. Rep. 440, 113 (2007)
G. Ananthakrishna, D. Sahoo, J. Phys. D Appl. Phys. 14, 699 (1981)
T.A. Parthasarathy, S.I. Rao, D.M. Dimiduk, M.D. Uchic, D.R. Trinkle, Scr. Mater. 56, 313 (2007)
D.M. Norfleet, D.M. Dimiduk, S.J. Polasik, M.D. Uchic, M. Mj, Acta Mater. 56, 2988 (2008)
P.J. Jackson, Z.S. Basinski, Can. J. Phys. 45, 707 (1967)
W. Püschl, R. Frydman, G. Schoeck, Phys. Stat. Solidi 74, 211 (1982)
G. Schoeck, R. Frydman, Phys. Stat. Solidi 53, 661 (1972)
G.I. Taylor, Philos. R. Soc. A Math. Phys. 145, 362 (1934)
G.I. Taylor, Proc. R. Soc. A Math. Phys. 146, 501 (1934)
E. Orowan, Z. Phys. 89, 605 (1934)
M. Polanyi, Z. Phys. 89, 660 (1934)
Z. Basinski, Scr. Mater. 8, 1301 (1974)
V.V. Bulatov, L.L. Hsiung, M. Tang, A. Arsenlis, M.C. Bartelt, W. Cai, J.N. Florando, M. Hiratani, M. Rhee, G. Hommes, T.G. Pierce, Nature 440(7088), 1174 (2006)
R. Madec, B. Devincre, L. Kubin, Phys. Rev. Lett. 89, 255508 (2002)
M. Zaiser, M.C. Miguel, I. Groma, Phys. Rev. B 64, 224102 (2001)
L.S. Tóth, A. Molinari, Y. Estrin, J. Eng. Mater. T 124, 71 (2002)
G.I. Taylor, H. Quinney, Proc. R. Soc. A Math. Phys. 143, 307 (1934)
W.G. Johnston, J.J. Gilman, J. Appl. Phys. 30, 129 (1959)
G.A. Webster, Philos. Mag. 14, 775 (1966)
S. Sandfeld, T. Hochrainer, M. Zaiser, P. Gumbsch, J. Mater. Res. 26, 623 (2011)
N. Hansen, D. Kuhlmann-Wilsdorf, Mater. Sci. Eng. 81, 141 (1986)
L.P. Kubin, Y. Estrin, Acta Metal. 38, 697 (1990)
S. Sandfeld, M. Zaiser, T. Hochrainer, Expansion of quasi-discrete dislocation loops in the context of a 3D continuum theory of curved dislocations. AIP Conf. Proc. 1168, 1148 (2009)
T. Hochrainer, Philos. Mag. 95, 1321 (2015)
T. Hochrainer, J. Mech. Phys. Solids 88, 12 (2016)
M. Monavari, M. Zaiser, https://arxiv.org/abs/170903694 (arXiv preprint) (2017)
P.D. Ispánovity, I. Groma, G. Györgyi, F.F. Csikor, D. Weygand, Phys. Rev. Lett. 105, 085503 (2010)
P.D. Ispánovity, Á. Hegyi, I. Groma, G. Györgyi, K. Ratter, D. Weygand, Acta Mater. 61, 6234 (2013)
J. Lepinoux, L.P. Kubin, A simulation. Scr. Metall. 21, 6 (1987)
R.J. Amodeo, N.M. Ghoniem, Phys. Rev. B 41, 6958 (1990)
A. Gulluoglu, D.J. Srolovitz, R. LeSar, P. Lomdahl (1989)
E. Van der Giessen, A. Needleman, Model. Simul. Mater. Sci. 3, 689 (1995)
H. Wang, R. LeSar, Philos. Mag. A 71, 149 (1995)
K.C. Le, H. Stumpf, Int. J. Plast. 12, 611 (1996)
H.D. Fan, Q.Y. Wang, M. KashifKhan, Appl. Mech. Mater. 275, 132 (2013)
N. Ahmed, A. Hartmaier, J. Mech. Phys. Solids 58, 2054 (2010)
L.P. Kubin, G. Canova, M. Condat, B. Devincre, V. Pontikis, Y. Bréchet, Solid State Phenom. 23, 455 (1992)
G. Canova, Y. Bréchet, L. Kubin, B. Devincre, V. Pontikis, M. Condat, Solid State Phenom. 35, 101 (1993)
J. Hirth, M. Rhee, H. Zbib, J. Comput.-Aided Mater. 3, 164 (1996)
H. Zbib, M. Rhee, J. Hirth, Adv. Eng. Plast. Appl. 15, 5 (1996)
N.M. Ghoniem, R. Amodeo, Computer simulaltion of dislocation pattern formation. Trans. Tech. Publ. 20, 20 (1988)
G. Canova, Y. Brechet, L. Kubin, Model. Plast. Deform. Eng. Appl. 20, 20 (1992)
L.P. Kubin, J. Mater. Sci. Technol. 6, 137 (1993)
K. Schwarz, J. Tersoff, Appl. Phys. Lett. 69, 1220 (1996)
M. Rhee, H.M. Zbib, J. Hirth, H. Huang, T. De la Rubia, Model. Simul. Mater. Sci. 6, 467 (1998)
H.M. Zbib, T.D. de la Rubia, Int. J. Plast. 18, 1133 (2002)
E.Y. Gutmanas, E.M. Nadgornyi, Sov. Phys. Solid State 12, 733 (1970)
H.M. Zbib, M. Hiratani, M. Shehade, https://arxiv.org/cond-mat/0509531 (arXiv preprint) (2005)
S.S. Quek, Z. Wu, Y.W. Zhang, D.J. Srolovitz, Acta Mater. 75, 92 (2014)
Y. Zhu, H. Wang, X. Zhu, Y. Xiang, Int. J. Plast. 60, 19 (2014)
Y.-N. Cui, Z.-L. Liu, Z. Zhuang, J. Mech. Phys. Solids 76, 127 (2015)
A.M. Hussein, S.I. Rao, M.D. Uchic, D.M. Dimiduk, J.A. El-Awady, Acta Mater. 85, 180 (2015)
Y. Li, C. Robertson, M. Shukeir, L. Dupuy, Model. Simul. Mater. Sci. 26, 055009 (2018)
J. Chevy, M. Fivel, F. Louchet, P. Duval, Philos. Mag. Lett 92, 262 (2012)
C. Robertson, G.P. Reddy, C. Déprés, M. Fivel, Trans. Indian Inst. Metal. 69, 477 (2016)
F.F. Csikor, C. Motz, D. Weygand, M. Zaiser, S. Zapperi, Science 318, 251 (2007)
J. El-Awady, H. Fan, A. Hussein, Multisc. Mater. Model. Nanomech. 245, 337 (2016)
K.M. Davoudi, J.J. Vlassak, https://arxiv.org/abs/14086609 (arXiv preprint) (2014).
K. Davoudi, Scr. Mater. 131, 63 (2017)
S.S. Shishvan, L. Nicola, E. Van der Giessen, J. Appl. Phys. 107, 093529 (2010)
K. Danas, V.S. Deshpande, Model. Simul. Mater. Sci. Eng. 21, 20 (2013)
W.B. Lee, Y.P. Chen, Int. J. Plast. 26, 1527 (2010)
K.M. Davoudi, L. Nicola, J.J. Vlassak, J. Appl. Phys. 115, 1 (2014)
A. Roos, J.T. De Hosson, E. Van der Giessen, Comput. Mater. 20, 19 (2001)
R. Kumar, L. Nicola, E. Van der Giessen, Mat. Sci. Eng. A-Struct. 527, 7 (2009)
E. Van der Giessen, Discrete Dislocation Plasticity Analysis of Cracks and Fracture, Multiscale Modelling of Plasticity and Fracture by Means of Dislocation Mechanics (Springer, Vienna, 2010), pp. 185–212
A. Vattré, B. Devincre, F. Feyel, R. Gatti, S. Groh, O. Jamond, A. Roos, J. Mech. Phys. Solids 63, 491 (2014)
H.A. Askari, A continuum dislocation dynamics framework for plasticity of polycrystalline materials (2014)
K.M. Davoudi, J.J. Vlassak, J. Appl. Phys. 123, 085302 (2018)
A.E. Mayer, E.N. Borodin, P.N. Mayer, Y.V. Vorobyov, D.A. Tikhonov, Evolution of perturbations of temperature and dislocation density at high-rateshear deformation of pure metals and alloys. In: ICF13, China, p. 16 (2013)
C. de Sansal, B. Devincre, L.P. Kubin, Key Eng. Mater. 423, 25 (2010)
M.A. Zikry, M. Kao, Scr. Mater. 34, 1115 (1996)
M. Zikry, Comput. Struct. 50, 337 (1994)
R.J. Asaro, J.R. Rice, J. Mech. Phys. Solids 25, 309 (1977)
R. Jones, J. Zimmerman, G. Po, https://arxiv.org/abs/160804335 (arXiv preprint) (2016).
F.F. Lavrentev, Y.A. Pokhil, Mater. Sci. Eng. 18, 261 (1975)
H. Salmenjoki, Predicting the behaviour of dislocation systems with machine learning methods, school of science, vol Master of Science in Technology, Aalto University (2017)
Z.Y. Zhong, H.G. Brokmeier, W.M. Gan, E. Maawad, B. Schwebke, N. Schell, Mater. Charact 108, 124 (2015)
T. Hatem, M. Zikry, Philos. Mag. 89, 3087 (2009)
A.K. Head, Philos. Mag. 26, 65 (1972)
E.F. Rauch, J.J. Gracio, F. Barlat, Acta Mater. 55, 2939 (2007)
M. Peach, J.S. Koehler, Phys. Rev. B 80, 436 (1950)
K. W. Schwarz, Simulation of dislocations on the mesoscopic scale. I. Methods and examples (1999)
A. Akef, J.H. Driver, Mater. Sci. Forum 113, 103 (1993)
F. Basson, J.H. Driver, Acta Mater. 48, 2101 (2000)
J.F. Humphreys, M. Ferry, Mater. Sci. Forum 217, 529 (1996)
P. Shanthraj, M.A. Zikry, Acta Metal. 59, 7695 (2011)
G.A. Malygin, Phys. Stat. Solidi 119, 423 (1990)
J. Hu, A.C.F. Cocks, Int. J. Solids. Struct. 78–79, 21 (2016)
M. Zaiser, S. Sandfeld, Model. Simul. Mater. Sci. 23, 065012 (2014)
S.A.H. Motaman, U. Prahl, J. Mech. Phys. Solids 122, 205 (2019)
F.R. Nabarro, M.S. Duesbery, Dislocations in Solids (Elsevier, New York, 2002)
S. Xia, J. Belak, A. El-Azab, Model. Simul. Mater. Sci. 24, 075007 (2016)
P. Hähner, Acta Mater. 44, 2345 (1996)
B. Bakó, I. Groma, Phys. Rev. B 60, 122 (1999)
H.E. Evans, G. Knowles, Acta Metal. 25, 963 (1977)
A. Ardell, S. Lee, Acta Metal. 34, 2411 (1986)
O. Ajaja, J. Mater. Sci. 21, 3351 (1986)
L. Shi, D. Northwood, J. Mater. Sci. 28, 5963 (1993)
P. Lin, S. Lee, A. Ardell, Acta Metal. 37, 739 (1989)
A. Alankar, I.N. Mastorakos, D.P. Field, H.M. Zbib, J. Eng. Mater. T 134, 021018 (2012)
S. Groh, H. Zbib, J. Eng. Mater. T 131, 041209 (2009)
A. Ramasubramaniam, M. Ariza, M. Ortiz, J. Mech. Phys. Solids 55, 615 (2007)
G. Gaucherin, F. Hofmann, J.P. Belnoue, A.M. Korsunsky, Proced. Eng. 1, 241 (2009)
V. Deshpande, A. Needleman, E. Van der Giessen, J. Mech. Phys. Solids 51, 2057 (2003)
H.M. Zbib, M. Rhee, J.P. Hirth, Int. J. Mech. Sci. 40, 113 (1998)
A. Benzerga, Y. Bréchet, A. Needleman, E. Van der Giessen, Model. Simul. Mater. Sci. 12, 159 (2003)
M. Wollgarten, M. Beyss, K. Urban, H. Liebertz, U. Köster, Phys. Rev. Lett. 71, 20 (1993)
B. Devincre, L. Kubin, T. Hoc, Scr. Mater. 54, 741 (2006)
R.B. Sills, N. Bertin, A. Aghaei, W. Cai, Phys. Rev. Lett. 121, 085501 (2018)
L. Bortoloni, P. Cermelli, Z. Phys. 55, 105 (2004)
C.N. Ahlquist, W.D. Nix, Acta Metal. 19, 373 (1971)
D.V. Berkov, N.L. Gorn, Model. Simul. Mater. Sci. Eng. 26, 20 (2018)
M. Fivel, ed. By O. Cazacu, (2010) p. 17
A.K. Head, W.W. Wood, Philos. Mag. Lett 27, 519 (1973)
L. Chung-Zi, S. Chang-Hsu, Mater. Sci. Eng. 49, 133 (1981)
R.M. Allen, L.S. Toth, A.L. Oppedal, H. El Kadiri, Materials (Basel) 11, 20 (2018)
C.H. Cáceres, P. Lukáč, A. Blake, Philos. Mag. 88(7), 991 (2008)
V. Parmar, K. Changela, B. Srinivas, M. ManiSankar, S. Mohanty, S.K. Panigrahi, K. Hariharan, D. Kalyanasundaram, Materials (Basel) 12, 20 (2019)
T. Richeton, F. Wagner, C. Chen, L.S. Toth, Materials (Basel) 11, 20 (2018)
A. El-Azab, Phys. Rev B 61, 11956 (2000)
R. Wu, D. Tüzes, P.D. Ispánovity, I. Groma, T. Hochrainer, M. Zaiser, Phys. Rev. B 98, 054110 (2018)
D.W. Suh, J.Y. Cho, K.H. Oh, H.C. Lee, ISIJ Int. 42, 564 (2002)
I.V. Alexandrov, R.G. Chembarisova, Rev. Adv. Mater. Sci. 16, 51 (2007)
S.C. Baik, Y. Estrin, H.S. Kim, R.J. Hellmig, Mater. Sci. Eng. A 351, 86 (2003)
I. Groma, F. Csikor, M. Zaiser, Acta Mater. 51, 1271 (2003)
C. Zhou, S.B. Biner, R. LeSar, Acta Mater. 58, 1565 (2010)
S.-W. Lee, S. Aubry, W.D. Nix, W. Cai, Dislocation junctions and jogs in a free-standing FCC thin film (2011)
K. Schacht, A.H. Motaman, U. Prahl, W. Bleck, A unified dislocation density-dependent physical-based constitutive model for cold metal forming, in Conference Proceedings, Vol 1896, ed. by S. Sath (AIP Publishing, College Park, 2017), p. 160020
H. Yasin, H.M. Zbib, M.A. Khaleel, Mater. Sci. Eng. A 309, 294 (2001)
K.C. Le, Int. J. Plast. 76, 213 (2016)
S. Sandfeld, The Evolution of Dislocation Density in a Higher-Order Continuum Theory of Dislocation Plasticity (2010)
H. Ghaffarian, A.K. Taheri, K. Kang, S. Ryu, Multisc. Sci. Eng. 1, 47 (2019)
R. Dronskowski, Metals 8(9), 705 (2018)
J. Amodeo, S. Merkel, C. Tromas, P. Carrez, S. Korte-Kerzel, P. Cordier, J. Chevalier, Crystals 8, 20 (2018)
S. Sandfeld, G. Po, Model. Simul. Mater. Sci. 23, 085003 (2015)
U.F. Kocks, Unified Constitutive Equations for Creep and Plasticity ed. By A. K. Miller (Springer, Dordrecht, 1987), pp. 1–88
J. Klepaczko, C. Chiem, J. Mech. Phys. Solids 34, 29 (1986)
Y. Estrin, Unif. Constit. Laws Plast. Deform. 1, 69 (1996)
A.S. Krausz, K. Krausz, Unified Plastic Constitutive Laws of Deformation (Academic Press, San Diego, 1996)
Y. Bergström, Mater. Sci. Eng. 5, 193 (1970)
J. Hu, Z. Zhuang, F. Liu, X. Liu, Z. Liu, Comput. Mater. Sci. 159, 86 (2019)
S. Xia, A. El-Azab, Model. Simul. Mater. Sci. 23, 055009 (2015)
J. Bonneville, B. Escaig, Acta Metal. 27, 1477 (1979)
L. Brown, Philos. Mag. A 82, 1691 (2002)
W. Püschl, Prog. Mater. Sci 47, 415 (2002)
J. Deng, A. El-Azab, Philos. Mag. 90, 3651 (2010)
T. Mura, General Theory of Eigenstrains, Micromechanics of Defects in Solids (Springer, Dordrecht, 1982), pp. 1–62
J. Marian, S. Fitzgerald, G. Po, Handbook of materials modeling: applications. Curr. Emerg. Mater. 2, 1 (2018)
G. Po, N. Ghoniem, J. Mech. Phys. Solids 66, 103 (2014)
W. Cai, A. Arsenlis, C.R. Weinberger, V.V. Bulatov, J. Mech. Phys. Solids 54, 561 (2006)
G. Po, M. Lazar, N.C. Admal, N. Ghoniem, Int. J. Plast. 103, 1 (2018)
B. Devincre, R. Madec, G. Monnet, S. Queyreau, R. Gatti, L. Kubin, Mech. Nano-obj. 81, 20 (2011)
D. Weygand, L. Friedman, E. Van der Giessen, A. Needleman, Model. Simul. Mater. Sci. 10, 437 (2002)
A. Arsenlis, W. Cai, M. Tang, M. Rhee, T. Oppelstrup, G. Hommes, T.G. Pierce, V.V. Bulatov, Model. Simul. Mater. Sci. 15, 553 (2007)
G. Po, M.S. Mohamed, T. Crosby, C. Erel, A. El-Azab, N. Ghoniem, Jom 66, 2108 (2014)
D. Luscher, Continuum dislocation-density based models for the dynamic shock response of single-crystal and polycrystalline materials. In: APS Shock Compression of Condensed Matter Meeting Abstracts (2017)
F. Šiška, D. Weygand, S. Forest, P. Gumbsch, Comput. Mater. Sci. 45, 793 (2009)
S. Ziaei, M. Zikry, Modeling the effects of dislocation-density interaction, generation, and recovery on the behavior of HCP. Materials 20, 20 (2015)
K. Nakashima, Z. Horita, M. Nemoto, T.G. Langdon, Acta Mater. 46, 1589 (1998)
A. Kobaissy, G. Ayoub, L. Toth, S. Mustapha, M. Shehadeh, Int. J. Plast. 114, 252 (2019)
J. Senger, D. Weygand, C. Motz, P. Gumbsch, O. Kraft, Acta Mater. 59, 2937 (2011)
C. Motz, D. Weygand, J. Senger, P. Gumbsch, Acta Mater. 57, 1744 (2009)
A.H. Delandar, S.M.H. Haghighat, P. Korzhavyi, R. Sandström, Int J. Mater. Res. 107, 988 (2016)
O. Kapetanou, V. Koutsos, E. Theotokoglou, D. Weygand, M. Zaiser, JMBM 24, 105 (2015)
Y. Xu, D. Balint, D. Dini, Model. Simul. Mater. Sci. 24, 045007 (2016)
C. Lemarchand, B. Devincre, L. Kubin, J. Mech. Phys. Solids 49, 1969 (2001)
J. Yin, D.M. Barnett, W. Cai, Model. Simul. Mater. Sci. 18, 045013 (2010)
Acknowledgements
The authors wish to exhibit their thanks to their coworker at University of Guilan, many of whom contributed to this work.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Mohamadnejad, S., Basti, A. & Ansari, R. Analyses of Dislocation Effects on Plastic Deformation. Multiscale Sci. Eng. 2, 69–89 (2020). https://doi.org/10.1007/s42493-020-00037-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42493-020-00037-2