Abstract
Gantry robots and anthropomorphic arms of various sizes have already been studied and, while they are in use in some parts of the world for automated construction, a new kind of wide workspace machinery, cable-driven parallel robots (CDPR), has emerged. These robots are capable of automated movement in a very wide workspace, using cables reeled in and out by winches as actuation members, the other elements being easily stacked for easy relocation and reconfiguration, which is critical for on-site construction. The motivation of this paper is to showcase the potential of a CDPR operating solely on motor position sensors and showing limited collisions from the cables for large-scale applications in the building industry relevant for additive manufacturing, without risk of collisions between the cables and the building. The combination of the Cogiro CDPR (Tecnalia, LIRMM-CNRS 2010) with the extruder and material of the Pylos project (IAAC 2013) opens the opportunity to a 3D printing machine with a workspace of 13.6 × 9.4 × 3.3 m. The design patterns for printing on such a large scale are disclosed, as well as the modifications that were necessary for both the Cogiro robot and Pylos extruder and material. Two prints, with different patterns, have been achieved with the Pylos extruder mounted on Cogiro: the first spanning 3.5 m in length, the second, reaching a height of 0.86 m. Based on this initial experiment, plans for building larger parts and buildings are discussed, as well as other possible applications for CDPRs in construction, such as the manipulation of assembly processes (windows, lintels, beams, floor elements, curtain wall modules, etc.) or brick laying.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Barnett E, Gosselin C (2015) Large-scale 3D printing with a cable-suspended robot. Addit Manuf 7:27–44
Bosscher P, Williams II R, Tummino M (2005) A concept for rapidly-deployable cable robot search and rescue systems. In: Proc. ASME Int. Design Eng. Technical Conf., Long Beach
Bosscher P, Williams R, Bryson L, Castro-Lacouture D (2007) Cable-suspended robotic contour crafting system. Autom Constr 17(1):45–55
Brian P (2014) Building bytes. In: Fabricate: negotiating design and making. pp 130–142
Carlucci V (2016) World advanced saving project. Archeomatica 6(4):24–26
Carpo M, Kholer M (2014) Challenging the thresholds. In: Fabricate: negotiating design and making. pp 12–21
Cesaretti G, Dini E, De Kestelier X, Colla V, Pambaguian L (2014) Building components for an outpost on the Lunar soil by means of a novel 3D printing technology. Acta Astronaut 93:430–450
Fastbrick robotics (2015) http://www.asx.com.au/asxpdf/20150624/pdf/42zcrnj7yq2by9.pdf
Giannakopoulos S (2015) Pylos, IAAC https://iaac.net/research-projects/large-scale-3d-printing/pylos/
Gouttefarde M, Collard J, Riehl N, Baradat C (2015) Geometry selection of a redundantly actuated cable-suspended parallel robot. IEEE Trans Rob 31(2):501–510
Hack N, Lauer W (2014) Mesh-Mould: robotically fabricated spatial meshes as reinforced concrete formwork. Archit Dig 84(3):44–53
Helm V (2014) In-situ fabrication: mobile robotic units on construction sites. Archit Des 3(84):100–107
Izard JB, Gouttefarde M, Baradat C, Culla D, Sallé D (2013) Integration of a parallel cable-driven robot on an existing building façade. In: Cable-driven parallel robots. pp 149–164
Khoshnevis B (2004) Automated construction by contour crafting-related robotics and information technologies. Autom Constr 13(1):5–19
Laarman J, Jokic S, Novikov P, Fraguada L, Markopoulou A (2014) Antigravity additive manufacturing. In: Fabricate: negotiating design and making. pp 192–197
Lamaury J, Gouttefarde M, Chemori A, Hervé P (2013) Dual-space adaptive control of redundantly actuated cable-driven parallel robots. In: 2013 IEEE/RSJ international conference on intelligent robots and systems, Tokyo
Lytle A, Saidi K (2006) NIST research in autonomous construction. Auton Robots 22(3):211–221
Merlet JP, Daney D, Winch A, Needs A (2010) A portable, modular parallel wire crane for rescue operations. In: IEEE Int. Conf. on Robotics and Automation, Anchorage
Nan R, Li D, Jin C, Wang Q, Zhu L, Zhu W, Zhang H, Yue Y, Qian L (2011) The five-hundred-meter aperture spherical radio telescope (FAST) project. Int J Mod Phys D 20(6):989–1024
Nguyen D, Gouttefarde M, Company O, Pierrot F (2013) On the simplifications of cable model in static analysis of large-dimension cable-driven parallel robots. In: IEEE/RSJ international conference on intelligent robots and systems
Peters SL, Podkaminer N, Coller TC (2011) Brick laying system. US Patent US8965571 B2
Stuecker J, Miller J, Ferrizz R, Mudd J, Cesarano J (2004) Advanced support structures for enhanced catalytic activity. Ind Eng Chem Res 43(1):51–55
SkyCam (2017) http://skycam.tv/
Tecnalia (2015) Cable driven parallel robotics for industrial applications https://youtu.be/px8vwNerkuo
Tecnalia (2016) COGIRO; Cable robot for agile operation in large workspaces https://youtu.be/6RjBKvoc6N4
Warnier C, Verbruggen D (2009) Ceramic 3D printing, unfold. http://unfold.be/pages/ceramic-3d-printing
Acknowledgements
The presented work is the fruit of a collaboration between IAAC and Tecnalia. It is part of the Open Thesis Fabrication program of IAAC, with the support and expertise of A. Markopoulou, S. Gianakopoulos, D. Stanojevic, K. Chadha, and M. Marengo. The help of the students of the program, S. Chukkapalli, I. Giraud, A. Ibrahim, C. Raaghav, L. Ratoi, L. Tayefi, N. Abadi, and T. Thomas, in both physical and intellectual details of the experiments, is greatly acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Izard, JB., Dubor, A., Hervé, PE. et al. Large-scale 3D printing with cable-driven parallel robots. Constr Robot 1, 69–76 (2017). https://doi.org/10.1007/s41693-017-0008-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41693-017-0008-0