[go: up one dir, main page]
More Web Proxy on the site http://driver.im/ Skip to main content

Advertisement

Springer Nature Link
Log in

Prediction of Cutting Forces in Milling Using Machine Learning Algorithms and Finite Element Analysis

  • Published:
Journal of Materials Engineering and Performance Aims and scope Submit manuscript

Abstract

Cutting force estimation is an essential factor for the stability and the optimization of the machining process. The present article deals with the prediction of the cutting forces during the face milling of AISI 4140 with coated cemented carbide inserts under dry cutting conditions. The required data for the development of the predictive models were obtained through milling investigations conducted in various cutting conditions. Two modeling approaches, particularly machine learning algorithms and finite element analysis, have been employed in the study. A series of machine learning algorithms were applied such as support vector regression, k-nearest neighbor, polynomial regression and random forest. The machine learning and FE models evaluate the dependence of the cutting force magnitude on milling parameters like cutting speed, radial depth of cut and feed per tooth. Results acquired by the predictive models have been compared with the experimental ones. Taking into account the sufficient convergence between them, the introduced machine learning models could be effectively applied in order to estimate the effect of cutting conditions on the developed milling forces. Innovative machine learning models could be implemented into CAM software to increase the productivity of manufacturing procedures.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
£29.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (United Kingdom)

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

Explore related subjects

Discover the latest articles, news and stories from top researchers in related subjects.

References

  1. F. Wang, J. Zhao, A. Li and J. Zhao, Experimental Study on Cutting Forces and Surface Integrity in High-Speed Side Milling of Ti-6Al-4V Titanium Alloy, Mach. Sci. Technol. Int. J., 2014, 18, p 448–463.

    Article  CAS  Google Scholar 

  2. E. Budak, Analytical Models for High Performance Milling Part I: Cutting Forces, Structural Deformations and Tolerance Integrity, Int. J. Mach. Tools Manuf., 2006, 46, p 1478–1488.

    Article  Google Scholar 

  3. G. Skordaris, K.-D. Bouzakis, P. Charalampous, T. Kotsanis, E. Bouzakis and R. Bejjani, Bias Voltage Effect on the Mechanical Properties, Adhesion and Milling Performance of PVD Films on Cemented Carbide Inserts, Wear, 2018, 404, p 50–61.

    Article  Google Scholar 

  4. M. Rubeo and T. Schmitz, Milling Force Modeling: a Comparison of Two Approaches, Procedia Manuf., 2016, 5, p 90–105.

    Article  Google Scholar 

  5. I. Lazoglu, C. Manav and Y. Murtezaoglu, Tool Path Optimization for free form Surface Machining, CIRP Ann., 2009, 58, p 101–104.

    Article  Google Scholar 

  6. Q. Xu, J. Zhao and X. Ai, Cutting Performance of Tools Made of Different Materials in the Machining of 42CrMo4 High-strength Steel: a Comparative Study, Int. J. Adv. Manuf. Technol., 2017, 93, p 2061–2069.

    Article  Google Scholar 

  7. Z. Fu, W. Yang, X. Wang and J. Leopold, An Analytical Force Model for Ball-end Milling Based on a Predictive Machining Theory Considering Cutter Runout, Int. J. Adv. Manuf. Technol., 2016, 84, p 2449–2460.

    Article  Google Scholar 

  8. S. Rao and M.S. Shunmugam, Analytical Modeling of Micro End-Milling Forces with Edge Radius and Material Strengthening Effects, Mach. Sci. Technol. Int. J., 2012, 16, p 205–227.

    Article  Google Scholar 

  9. G. Newby, S. Venkatachalam and S.Y. Liang, Empirical Analysis of Cutting Force Constants in Micro-end-Milling Operations, J. Mater. Process. Technol., 2007, 192–193, p 41–47.

    Article  Google Scholar 

  10. C. Xu, T. Xu, X. Yi, J. Zhang, W. Liu and H. Li, Experimental Tests and Empirical Models of the Cutting Force and Surface Roughness When Cutting 1Cr13 Martensitic Stainless Steel with a Coated Carbide Tool, Adv. Mech. Eng., 2016, 8, p 1–10.

    Google Scholar 

  11. X. Man, D. Ren, S. Usui, C. Johnson and T. Marusich, Validation of Finite Element Cutting Force Prediction for End Milling, Procedia CIRP, 2012, 1, p 663–668.

    Article  Google Scholar 

  12. N. Michailidis, S. Kombogiannis, P. Charalampous, G. Maliaris and F. Stergioudi, Computational-Experimental Investigation of Milling Porous Aluminium, CIRP Ann. Manuf. Technol., 2017, 66, p 121–124.

    Article  Google Scholar 

  13. H. Persson, M. Agmell, V. Bushlya and J. Ståhl, Experimental and Numerical Investigation of Burr Formation in Intermittent Turning of AISI 4140, Procedia CIRP, 2017, 25, p 37–42.

    Article  Google Scholar 

  14. Z. Hessainia, A. Belbah, M.A. Yallese, T. Mabrouki and J.-F. Rigal, On the Prediction of Surface Roughness in the Hard Turning Based on Cutting Parameters and Tool Vibrations, Measurement, 2013, 46, p 1671–1681.

    Article  Google Scholar 

  15. M. Sayuti, A.A.D. Sarhan and F. Salem, Novel Uses of SiO2 Nano-Lubrication System in Hard Turning Process of Hardened Steel AISI4140 for Less Tool Wear, Surface Roughness and Oil Consumption, J. Clean. Prod., 2014, 67, p 265–276.

    Article  CAS  Google Scholar 

  16. K.-D. Bouzakis, N. Michailidis and G. Erkens, Thin Hard Coatings Stress–Strain Curve Determination Through a FEM Supported Evaluation of Nanoindentation Test Results, Surf. Coat. Technol., 2001, 142–144, p 102–109.

    Article  Google Scholar 

  17. F. Pedregosa, G. Varoquaux, A. Gramfort, V. Michel, B. Thirion, O. Grisel et al., Scikit-Learn: Machine Learning in Python, J. Mach. Learn. Res., 2012, 12, p 2825–2830.

    Google Scholar 

  18. U. Grömping, Variable Importance Assessment in Regression: Linear Regression versus Random Forest, Am. Stat., 2009, 63(4), p 308–319.

    Article  Google Scholar 

  19. T. Kleynhans, M. Montanaro, A. Gerace and C. Kanan, Predicting Top-of-Atmosphere Thermal Radiance Using MERRA-2 Atmospheric Data with Deep Learning, Remote Sens., 2017, 9(11), p 1133.

    Article  Google Scholar 

  20. C. Hu, G. Jain, P. Zhang, C. Schmidt, P. Gomadam and T. Gorka, Data-Driven Method Based on Particle Swarm Optimization and k-Nearest Neighbor Regression for Estimating Capacity of Lithium-Ion Battery, Appl. Energy, 2014, 129, p 49–55.

    Article  Google Scholar 

  21. A. Molinari, R. Cheriguene and H. Miguelez, Contact Variables and Thermal Effects at the Tool–Chip Interface in Orthogonal Cutting, Int. J. Solids Struct., 2012, 49(26), p 3774–3793.

    Article  Google Scholar 

  22. T. Thepsonthi and T. Özel, 3-D Finite Element Process Simulation of Micro-End Milling Ti-6Al-4V Titanium Alloy: Experimental Validations on Chip Flow and Tool Wear, J. Mater. Process. Technol., 2015, 221, p 128–145.

    Article  CAS  Google Scholar 

  23. G.R. Johnson and WH. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. in Proceedings of the 7th international symposium on ballistics, 1983, pp. 541–547

  24. S. Elhami, M.R. Razfar and M. Farahnakian, Analytical, Numerical and Experimental Study of Cutting Force During Thermally Enhanced Ultrasonic Assisted Milling of Hardened AISI 4140, Int. J. Mech. Sci., 2015, 103, p 158–171.

    Article  Google Scholar 

  25. T. Özel and E.Zeren, Finite Element Method Simulation of Machining of AISI 1045 Steel With A Round Edge Cutting Tool. in Proceedings of 8th CIRP International Workshop on Modeling of Machining Operations, 2005, pp. 533–542

  26. M. Murugesan and D.W. Jung, Johnson Cook Material and Failure Model Parameters Estimation of AISI-1045 Medium Carbon Steel for Metal Forming Applications, Materials, 2019, 12(4), p 609.

    Article  CAS  Google Scholar 

  27. M. Agmell, A. Ahadi and J.E. Ståhl, The Link Between Plasticity Parameters and Process Parameters in Orthogonal Cutting, Procedia CIRP, 2013, 8, p 224–229.

    Article  Google Scholar 

  28. G. Skordaris, K.-D. Bouzakis, P. Charalampous, E. Bouzakis, R. Paraskevopoulou, O. Lemmer and S. Bolz, Brittleness and Fatigue Effect of Mono- and Multi-Layer PVD Cutting Performance of Coated Cemented Carbide Inserts, CIRP Ann. Manuf. Technol., 2014, 63(1), p 96–96.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department, Aristoteles University of Thessaloniki, Thessaloniki, Greece

    Paschalis Charalampous

Authors
  1. Paschalis Charalampous
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Paschalis Charalampous.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Charalampous, P. Prediction of Cutting Forces in Milling Using Machine Learning Algorithms and Finite Element Analysis. J. of Materi Eng and Perform 30, 2002–2013 (2021). https://doi.org/10.1007/s11665-021-05507-8

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11665-021-05507-8

Keywords

Search

Navigation