[go: up one dir, main page]
More Web Proxy on the site http://driver.im/ Skip to main content

Advertisement

Log in

Nanoedible films for food packaging: a review

  • Review
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

Edible packaging is a thin layer formed on food surface, which can be eaten as an integral part of the food product. While an edible coating is formed as thin layer directly on the food surface for improving shelf life of fruits and vegetables, the edible film is formed as thin layer separately and wrapped on food surface later. The edible films have attracted much interest as it has potential to overcome the problems associated with plastic packaging. However, their film properties are not as good as the conventional packaging materials, such as plastics. The food and beverage industry is showing much interest to incorporate the benefits of nanotechnology. The nanomaterials have unique characteristics (such as, large surface area-to-volume ratio, distinct optical behaviour and high mechanical strength), which, when incorporated with the edible films, could improve the film properties of the edible films. Therefore, the right selection and incorporation of nanomaterials can improve the film properties. Most of the previous review articles on food packaging summarized the research findings of synthetic and/or biodegradable films and coatings. Only few review articles were devoted for edible films and coatings. Among them, very few review articles had discussion about the use of nanotechnology for all kinds of food packaging applications. However, there is no comprehensive review on nanoedible films. The objective of this review article is to cover the recent works on nanoedible films prepared incorporating the nanofillers (such as, nanostarch, nanocellulose, nanochitosan/nanochitin, nanoproteins and nanolipids), the film properties (such as, the mechanical properties, WVP and film colour of some of the recent nanoedible films), and the challenges and opportunities for future research.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
£29.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (United Kingdom)

Instant access to the full article PDF.

Figure 1
Figure 2

Similar content being viewed by others

Explore related subjects

Discover the latest articles, news and stories from top researchers in related subjects.

References

  1. Marsh K, Bugusu B (2007) Food packaging—roles, materials, and environmental issues. J Food Sci 72:R39–R55

    Google Scholar 

  2. Petersen K, Nielsen PV, Bertelsen G, Lawther M, Olsen MB, Nilsson NH, Mortensen G (1999) Potential of biobased materials for food packaging. Trends Food Sci Technol 10:52–68

    Google Scholar 

  3. Federation of Indian Chambers of Commerce and Industry (FICCI) (2016) A report on plastic industry. In: 2nd national conference on plastic packaging—the sustainable choice, pp 1–32

  4. World Packaging Organization (2008) market statistics and future trends in global packaging. https://www.worldpackaging.org, pp 1–44. Accessed 7 Feb 2019

  5. Hopewell J, Dvorak R, Kosior E (2009) Plastics recycling: challenges and opportunities. Philos Trans R Soc B 364:2115–2126

    Google Scholar 

  6. Kale G, Kijchavengkul T, Auras R, Rubino M, Selke SE, Singh SP (2007) Compostability of Bioplastic packaging materials: an overview. Macromol Biosci 7:255–277

    Google Scholar 

  7. Guilbert S, Gontard N, Cuq B (1995) Technology and applications of edible protective films. Packag Technol Sci 8:339–346

    Google Scholar 

  8. Shit SC, Shah PM (2014) Edible polymers: challenges and opportunities. J Polym Article ID 427259, 1–13

  9. Jeevahan J, Chandrasekaran M, Durairaj RB, Mageshwaran G, Joseph GB (2017) A brief review on edible packing materials. J Glob Eng Probl Solut 1:9–19

    Google Scholar 

  10. Jeevahan J, Chandrasekaran M (2018) Effect of olive oil concentrations on film properties of edible composite films prepared from corn starch and olive oil. Res J Pharm Technol 11:4934–4938

    Google Scholar 

  11. Mellinas C, Valdés A, Ramos M, Burgos N, Garrigós MDC, Jiménez A (2016) Active edible films. Current state and future trends. J Appl Polym Sci 133:1–15

    Google Scholar 

  12. Bumbudsanpharoke N, Ko S (2015) Nano-food packaging: an overview of market, migration research, and safety regulations. J Food Sci 80:R910–R923

    Google Scholar 

  13. Tsagkaris AS, Tzegkas SG, Danezis GP (2018) Nanomaterials in food packaging: state of the art and analysis. J Food Sci Technol 55:2862–2870

    Google Scholar 

  14. Cerqueira MA, Costa MJ, Fuciños C, Pastrana LM, Vicente AA (2013) Development of active and nanotechnology-based smart edible packaging systems: physical–chemical characterization. Food Bioprocess Technol 7:1472–1482

    Google Scholar 

  15. Pan K, Zhong Q (2016) Organic nanoparticles in foods: fabrication, characterization, and utilization. Annu Rev Food Sci Technol 7:245–266

    Google Scholar 

  16. Cerqueira MA, Vicente AA, Pastrana LM (2018) Nanotechnology in food packaging: opportunities and challenges. Nanomater Food Packag. https://doi.org/10.1016/b978-0-323-51271-8.00001-2

    Google Scholar 

  17. Eleftheriadou M, Pyrgiotakis G, Demokritou P (2017) Nanotechnology to the rescue: using nano-enabled approaches in microbiological food safety and quality. Curr Opin Biotechnol 44:87–93

    Google Scholar 

  18. De Azeredo MCH (2009) Nanocomposites for food packaging applications. Food Res Int 42:1240–1253

    Google Scholar 

  19. Arora A, Padua GW (2010) Review: nanocomposites in food packaging. J Food Sci 75:R43–R49

    Google Scholar 

  20. Reddy MM, Vivekanandhan S, Misra M, Bhatia SK, Mohanty AK (2013) Biobased plastics and bionanocomposites: current status and future opportunities. Prog Polym Sci 38:1653–1689

    Google Scholar 

  21. Attaran SA, Hassan A, Wahit MU (2015) Materials for food packaging applications based on bio-based polymer nanocomposites. J Thermoplast Compos Mater 30:143–173

    Google Scholar 

  22. Sarkar P, Choudhary R, Panigrahi S, Syed I, Sivapratha S, Dhumal CV (2017) Nano-inspired systems in food technology and packaging. Environ Chem Lett 15:607–622

    Google Scholar 

  23. Kumar N, Kaur P, Bhatia S (2017) Advances in bio-nanocomposite materials for food packaging: a review. Nutr Food Sci 47:591–606. https://doi.org/10.1108/nfs-11-2016-0176

    Google Scholar 

  24. Vasile C (2018) Polymeric nanocomposites and nanocoatings for food packaging: a review. Materials 11:1–49. https://doi.org/10.3390/ma11101834

    Google Scholar 

  25. Zambrano-Zaragoza M, González-Reza R, Mendoza-Muñoz N, Miranda-Linares V, Bernal-Couoh T, Mendoza-Elvira S, Quintanar-Guerrero D (2018) Nanosystems in edible coatings: a novel strategy for food preservation. Int J Mol Sci 19:1–24. https://doi.org/10.3390/ijms19030705

    Google Scholar 

  26. Haniffa MM, Ching Y, Abdullah L, Poh S, Chuah C (2016) Review of bionanocomposite coating films and their applications. Polymers 8:1–33. https://doi.org/10.3390/polym8070246

    Google Scholar 

  27. Sharma B, Malik P, Jain P (2018) Biopolymer reinforced nanocomposites: a comprehensive review. Mater Today Commun 16:353–363

    Google Scholar 

  28. Shapi’i RA, Othman SH (2015) edible nanofiller for development of edible bionanocomposite film: a review. J Polym Sci Technol 1:37–45

    Google Scholar 

  29. Le Corre D, Bras J, Dufresne A (2010) Starch nanoparticles: a review. Biomacromol 11:1139–1153

    Google Scholar 

  30. Dufresne A, Cavaillé JY, Helbert W (1996) New nanocomposite materials: microcrystalline starch reinforced thermoplastic. Macromolecules 29:7624–7626

    Google Scholar 

  31. Putaux JL, Molina-Boisseau S, Momaur T, Dufresne A (2003) Platelet nanocrystals resulting from the disruption of waxy maize starch granules by acid hydrolysis. Biomacromol 4:1198–1202

    Google Scholar 

  32. Kim HY, Lee JH, Kim JY, Lim WJ, Lim ST (2012) Characterization of nanoparticles prepared by acid hydrolysis of various starches. Starch-Stärke 64:367–373

    Google Scholar 

  33. Kim HY, Park SS, Lim ST (2015) Preparation, characterization and utilization of starch nanoparticles. Colloids Surf B Biointerfaces 126:607–620

    Google Scholar 

  34. Kim HY, Park DJ, Kim JY, Lim ST (2013) Preparation of crystalline starch nanoparticles using cold acid hydrolysis and ultrasonication. Carbohydr Polym 98:295–301

    Google Scholar 

  35. Dufresne A (2014) Crystalline starch based nanoparticles. Curr Opin Colloid Interface Sci 19:397–408

    Google Scholar 

  36. Herrera MP, Vasanthan T, Chen L (2017) Rheology of starch nanoparticles as influenced by particle size, concentration and temperature. Food Hydrocolloids 66:237–245

    Google Scholar 

  37. Gonçalves PM, Noreña CPZ, da Silveira NP, Brandelli A (2014) Characterization of starch nanoparticles obtained from Araucaria angustifolia seeds by acid hydrolysis and ultrasound. LWT Food Sci Technol 58:21–27

    Google Scholar 

  38. Sun Q, Li G, Dai L, Ji N, Xiong L (2014) Green preparation and characterisation of waxy maize starch nanoparticles through enzymolysis and recrystallisation. Food Chem 162:223–228

    Google Scholar 

  39. Shi A, Li D, Wang L, Li B, Adhikari B (2011) Preparation of starch-based nanoparticles through high-pressure homogenization and miniemulsion cross-linking: influence of various process parameters on particle size and stability. Carbohydr Polym 83:1604–1610

    Google Scholar 

  40. Qiu S, Li Y, Chen H, Liu Y, Yin L (2014) Effects of high-pressure homogenization on thermal and electrical properties of wheat starch. J Food Eng 128:53–59

    Google Scholar 

  41. Haaj SB, Magnin A, Pétrier C, Boufi S (2013) Starch nanoparticles formation via high power ultrasonication. Carbohydr Polym 92:1625–1632

    Google Scholar 

  42. Juna S, Hayden S, Damm M, Kappe CO, Huber A (2013) Microwave mediated preparation of nanoparticles from wx corn starch employing nanoprecipitation. Starch-Stärke 66:316–325

    Google Scholar 

  43. Angellier H, Molina-Boisseau S, Dole P, Dufresne A (2006) Thermoplastic starch–waxy maize starch nanocrystals nanocomposites. Biomacromol 7:531–539

    Google Scholar 

  44. Shi A, Wang L, Li D, Adhikari B (2013) Characterization of starch films containing starch nanoparticles. Carbohydr Polym 96:593–601

    Google Scholar 

  45. Piyada K, Waranyou S, Thawien W (2013) Mechanical, thermal and structural properties of rice starch films reinforced with rice starch nanocrystals. Int Food Res J 20:439–449

    Google Scholar 

  46. Li X, Qiu C, Ji N, Sun C, Xiong L, Sun Q (2015) Mechanical, barrier and morphological properties of starch nanocrystals-reinforced pea starch films. Carbohydr Polym 121:155–162

    Google Scholar 

  47. Dai L, Qiu C, Xiong L, Sun Q (2015) Characterisation of corn starch-based films reinforced with taro starch nanoparticles. Food Chem 174:82–88

    Google Scholar 

  48. Liu C, Jiang S, Zhang S, Xi T, Sun Q, Xiong L (2015) Characterization of edible corn starch nanocomposite films: the effect of self-assembled starch nanoparticles. Starch-Stärke 68:239–248

    Google Scholar 

  49. González A, Igarzabal CIA (2015) Nanocrystal-reinforced soy protein films and their application as active packaging. Food Hydrocolloids 43:777–784

    Google Scholar 

  50. Condés MC, Añón MC, Mauri AN, Dufresne A (2015) Amaranth protein films reinforced with maize starch nanocrystals. Food Hydrocolloids 47:146–157

    Google Scholar 

  51. Jiang S, Liu C, Wang X, Xiong L, Sun Q (2016) Physicochemical properties of starch nanocomposite films enhanced by self-assembled potato starch nanoparticles. LWT Food Sci Technol 69:251–257

    Google Scholar 

  52. Oliveira AV, da Silva APM, Barros MO, Filho MDMS, Rosa MF, Azeredo HMC (2018) Nanocomposite films from mango kernel or corn starch with starch nanocrystals. Starch-Stärke 70:1–7. https://doi.org/10.1002/star.201800028

    Google Scholar 

  53. Klemm D, Kramer F, Moritz S, Lindström T, Ankerfors M, Gray D, Dorris A (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Intl Ed 50:5438–5466

    Google Scholar 

  54. Afrin S, Karim Z (2017) Isolation and surface modification of nanocellulose: necessity of enzymes over chemicals. ChemBioEng Rev 4:1–16

    Google Scholar 

  55. Mishra RK, Sabu A, Tiwari SK (2018) Materials chemistry and the futurist eco-friendly applications of nanocellulose: status and prospect. J Saudi Chem Soc 22:949–978. https://doi.org/10.1016/j.jscs.2018.02.005

    Google Scholar 

  56. Gómez HC, Serpa A, Velásquez-Cock J, Gañán P, Castro C, Vélez L, Zuluaga R (2016) Vegetable nanocellulose in food science: a review. Food Hydrocolloids 57:178–186

    Google Scholar 

  57. Phanthong P, Reubroycharoen P, Hao X, Xu G, Abudula A, Guan G (2018) Nanocellulose: extraction and application. Carbon Resour Convers 1:32–43

    Google Scholar 

  58. Lee HV, Hamid SBA, Zain SK (2014) Conversion of lignocellulosic biomass to nanocellulose: structure and chemical process. Sci World J 2014:1–20

    Google Scholar 

  59. George J, Sabapathi SN (2015) Cellulose nanocrystals: synthesis, functional properties, and applications. Nanotechnol Sci Appl 2015(8):45–54

    Google Scholar 

  60. Ludueña L, Fasce D, Alvarez VA, Stefani PM (2011) Nanocellulose from rice husk following alkaline treatment to remove silica. BioResources 6:1440–1453

    Google Scholar 

  61. Rosa SML, Rehman N, Miranda MIGMd, Nachtigall SMB, Bica CID (2012) Chlorine-free extraction of cellulose from rice husk and whisker isolation. Carbohydr Polym 87:1131–1138

    Google Scholar 

  62. Jiang F, Hsieh YL (2013) Chemically and mechanically isolated nanocellulose and their self-assembled structures. Carbohydr Polym 95:32–40

    Google Scholar 

  63. Abraham E, Deepa B, Pothan LA, Jacob M, Thomas S, Cvelbar U, Anandjiwala R (2011) Extraction of nanocellulose fibrils from lignocellulosic fibres: A novel approach. Carbohydr Polym 86:1468–1475

    Google Scholar 

  64. Mueller S, Weder C, Foster EJ (2014) Isolation of cellulose nanocrystals from pseudostems of banana plants. RSC Adv 4:907–915

    Google Scholar 

  65. Cherian BM, Leão AL, Souza SFd, Thomas S, Pothan LA, Kottaisamy MK (2010) Isolation of nanocellulose from pineapple leaf fibres by steam explosion. Carbohydr Polym 81:720–725

    Google Scholar 

  66. Alemdar A, Sain M (2008) Biocomposites from wheat straw nanofibers: morphology, thermal and mechanical properties. Compos Sci Technol 68:557–565

    Google Scholar 

  67. Babaee M, Jonoobi M, Hamzeh Y, Ashori A (2015) Biodegradability and mechanical properties of reinforced starch nanocomposites using cellulose nanofibers. Carbohydr Polym 132:1–8. https://doi.org/10.1016/j.carbpol.2015.06.043

    Google Scholar 

  68. Dufresne A, Vignon MR (1998) Improvement of starch film performances using cellulose microfibril. Macromolecules 31:2693–2696

    Google Scholar 

  69. Liu C, Li B, Du H, Dong L, Zhang Y, Yu G, Mu X, Peng H (2016) Properties of nanocellulose isolated from corncob residue using sulfuric acid, formic acid, oxidative and mechanical methods. Carbohydr Polym 151:716–724

    Google Scholar 

  70. Li R, Fei J, Cai Y, Li Y, Feng J, Yao J (2009) Cellulose whiskers extracted from mulberry: a novel biomass production. Carbohydr Polym 76:94–99

    Google Scholar 

  71. Beck-Candanedo S, Roman M, Gray DG (2005) Effect of reaction conditions on the properties and behavior of wood cellulose nanocrystal suspensions. Biomacromolecules 6:1048–1054

    Google Scholar 

  72. Araki J, Wada M, Kuga S (2001) Steric stabilization of a cellulose microcrystal suspension by poly (ethylene glycol) grafting. Langmuir 17:21–27

    Google Scholar 

  73. Morais JPS, Rosa MdF, Filho MMS, Nascimento LD, Nascimento DMd, Cassales AR (2013) Extraction and characterization of nanocellulose structures from raw cotton linter. Carbohydr Polym 91:229–235

    Google Scholar 

  74. Menezes AJd, Siqueira G, Curvelo AA, Dufresne A (2009) Extrusion and characterization of functionalized cellulose whiskers reinforced polyethylene nanocomposites. Polymer 50:4552–4563

    Google Scholar 

  75. Rodriguez NLGd, Thielemans W, Dufresne A (2006) Sisal cellulose whiskers reinforced polyvinyl acetate nanocomposites. Cellulose 13:261–270

    Google Scholar 

  76. Moran JI, Alvarez VA, Cyras VP, Vazquez A (2008) Extraction of cellulose and preparation of nanocellulose from sisal fibers. Cellulose 15:149–159

    Google Scholar 

  77. Martelli-Tosi M, Torricillas MdS, Martins MA, Odílio Assis OBGd, Tapia-Blácido RT (2016) Using commercial enzymes to produce cellulose nanofibers from soybean straw. J Nanomater 2016:678–687. https://doi.org/10.1155/2016/8106814

    Google Scholar 

  78. Mandal A, Chakrabarty D (2011) Isolation of nanocellulose from waste sugarcane bagasse (SCB) and its characterization. Carbohydr Polym 86:1291–1299

    Google Scholar 

  79. Wulandari WT, Rochliadi A, Arcana IM (2016) Nanocellulose prepared by acid hydrolysis of isolated cellulose from sugarcane bagasse. In: IOP conference series: materials science and engineering 107: 012045, 1–7

  80. Kimura F, Kimura T, Tamura M, Hirai A, Ikuno M, Horii F (2005) Magnetic alignment of the chiral nematic phase of a cellulose microfbril suspension. Langmuir 21:2034–2037

    Google Scholar 

  81. George J, Bawa AS, Siddaramaiah (2010) Synthesis and characterization of bacterial cellulose nanocrystals and their PVA nanocomposites. Adv Mater Res 123:383–386

    Google Scholar 

  82. George J, Siddaramaiah (2012) High performance edible nanocomposite flms containing bacterial cellulose nanocrystals. Carbohydr Polym 87:2031–2037

    Google Scholar 

  83. Tsukamoto J, Durán N, Tasic L (2013) Nanocellulose and bioethanol production from orange waste using isolated microorganisms. J Braz Chem Soc 24:1537–1543

    Google Scholar 

  84. Mariño M, Silva Ld, Durán N, Tasic L (2015) Enhanced materials from nature: nanocellulose from citrus waste. Molecules 20:5908–5923

    Google Scholar 

  85. Xu C, Zhu S, Xing C, Li D, Zhu N, Zhou H (2015) Isolation and properties of cellulose nanofibrils from coconut palm petioles by different mechanical process. PLoS ONE 10:1–11. https://doi.org/10.1371/journal.pone.0122123

    Google Scholar 

  86. Yongvanich N (2015) Isolation of nanocellulose from pomelo fruit fibers by chemical treatments. J Nat Fibers 12:323–331

    Google Scholar 

  87. Zhao J, Zhang W, Zhang X, Zhang X, Lu C, Deng Y (2013) Extraction of cellulose nanofibrils from dry softwood pulp using high shear homogenization. Carbohydr Polym 97:695–702

    Google Scholar 

  88. Li W, Zhao X, Huang Z, Liu S (2013) Nanocellulose fibrils isolated from BHKP using ultrasonication and their reinforcing properties in transparent poly (vinyl alcohol) films. J Polym Res 20:1–7

    Google Scholar 

  89. Wang H, Zhang X, Jiang Z, Yu Z, Yu Y (2016) Isolating nanocellulose fibrills from bamboo parenchymal cells with high intensity ultrasonication. Holzforschung 70:401–409

    Google Scholar 

  90. Li J, Wei X, Wang Q, Chen J, Chang G, Kong L, Su J, Liu Y (2012) Homogeneous isolation of nanocellulose from sugarcane bagasse by high pressure homogenization. Carbohydr Polym 90:1609–1613

    Google Scholar 

  91. Wang Y, Wei X, Li J, Wang Q, Wang F, Kong L (2013) Homogeneous isolation of nanocellulose from cotton cellulose by high pressure homogenization. J Mater Sci Chem Eng 1:49–52

    Google Scholar 

  92. Wang Y, Wei X, Li J, Wang F, Wang Q, Zhang Y, Kong L (2017) Homogeneous isolation of nanocellulose from eucalyptus pulp by high pressure homogenization. Ind Crops Prod 104:237–241

    Google Scholar 

  93. Cui S, Zhang S, Ge S, Xiong L, Sun Q (2016) Green preparation and characterization of size-controlled nanocrystalline cellulose via ultrasonic-assisted enzymatic hydrolysis. Ind Crops Prod 83:346–352

    Google Scholar 

  94. Hubbe MA, Ferrer A, Tyagi P, Yin Y, Salas C, Pal L, Rojas OJ (2017) Nanocellulose in thin films, coatings, and plies for packaging applications: a review. BioResources 12:2413–2433. https://doi.org/10.15376/biores.12.1.2143-2233

    Google Scholar 

  95. Charreau HL, Foresti M, Vazquez A (2013) Nanocellulose patents trends: a comprehensive review on patents on cellulose nanocrystals, microfibrillated and bacterial cellulose. Recent Pat Nanotechnol 7:56–80

    Google Scholar 

  96. Jozala AF, de Lencastre-Novaes LC, Lopes AM, Santos-Ebinuma VdC, Mazzola PG, Pessoa-Jr A, Grotto D, Gerenutti M, Chaud MV (2016) Bacterial nanocellulose production and application: a 10-year overview. Appl Microbiol Biotechnol 100:2063–2072

    Google Scholar 

  97. Azeredo HMC, Mattoso LHC, Avena-Bustillos RJ, Filho GC, Munford ML, Wood D, McHugh TH (2010) Nanocellulose reinforced chitosan composite films as affected by nanofiller loading and plasticizer content. J Food Sci 75:N1–N7

    Google Scholar 

  98. Bilbao-Sainz C, Bras J, Williams T, Sénechal T, Orts W (2011) HPMC reinforced with different cellulose nano-particles. Carbohydr Polym 86:1549–1557

    Google Scholar 

  99. Shankar S, Rhim JW (2016) Preparation of nanocellulose from micro-crystalline cellulose: the effect on the performance and properties of agar-based composite films. Carbohydr Polym 135:18–26

    Google Scholar 

  100. Chaichi M, Hashemi M, Badii F, Mohammadi A (2017) Preparation and characterization of a novel bionanocomposite edible film based on pectin and crystalline nanocellulose. Carbohydr Polym 157:167–175

    Google Scholar 

  101. Viana RM, Sá NMSM, Barros MO, Borges MdF, Azeredo HMC (2018) Nanofibrillated bacterial cellulose and pectin edible films added with fruit purees. Carbohydr Polym 196:27–32

    Google Scholar 

  102. Wang X, Guo C, Hao W, Ullah N, Chen L, Li Z, Feng X (2018) Development and characterization of agar-based edible films reinforced with nano-bacterial cellulose. Int J Biol Macromol 118:722–730

    Google Scholar 

  103. Shabanpour B, Kazemi M, Ojagh SM, Pourashouri P (2018) Bacterial cellulose nanofibers as reinforce in edible fish myofibrillar protein nanocomposite films. Int J Biol Macromol 117:742–751

    Google Scholar 

  104. Ilyas RA, Sapuan SM, Ishak MR, Zainudin ES (2018) Development and characterization of sugar palm nanocrystalline cellulose reinforced sugar palm starch bionanocomposites. Carbohydr Polym 202:186–202. https://doi.org/10.1016/j.carbpol.2018.09.002

    Google Scholar 

  105. Zeng JB, He YS, Li SL, Wang YZ (2011) Chitin whiskers: an overview. Biomacromolecules 13:1–11

    Google Scholar 

  106. Ifuku S (2014) Chitin and chitosan nanofibers: preparation and chemical modifications. Molecules 19:18367–18380

    Google Scholar 

  107. Mincea M, Negrulescu A, Ostafe V (2012) Preparation, modification, and applications of chitin nanowhiskers: a review. Rev Adv Mater Sci 30:225–242

    Google Scholar 

  108. Salaberria AM, Labidi J, Fernandes SCM (2015) Different routes to turn chitin into stunning nano-objects. Eur Polym J 68:503–515

    Google Scholar 

  109. Pereira AGB, Muniz EC, Hsieh YL (2014) Chitosan-sheath and chitin-core nanowhiskers. Carbohydr Polym 107:158–166

    Google Scholar 

  110. Ifuku S, Saimoto H (2012) Chitin nanofibers: preparations, modifications, and applications. Nanoscale 4:3308

    Google Scholar 

  111. Ji Y, Wolfe PS, Rodriguez IA, Bowlin GL (2012) Preparation of chitin nanofibril/polycaprolactone nanocomposite from a nonaqueous medium suspension. Carbohydr Polym 87:2313–2319

    Google Scholar 

  112. Fan Y, Saito T, Isogai A (2010) Individual chitin nano-whiskers prepared from partially deacetylated α-chitin by fibril surface cationization. Carbohydr Polym 79:1046–1051

    Google Scholar 

  113. Lertwattanaseri T, Ichikawa N, Mizoguchi T, Tanaka Y, Chirachanchai S (2009) Microwave technique for efficient deacetylation of chitin nanowhiskers to a chitosan nanoscaffold. Carbohydr Res 344:331–335

    Google Scholar 

  114. Wijesena RN, Tissera N, Kannangara YY, Lin Y, Amaratunga GAJ, de Silva KMN (2015) A method for top down preparation of chitosan nanoparticles and nanofibers. Carbohydr Polym 117:731–738

    Google Scholar 

  115. Lu Y, Sun Q, She X, Xia Y, Liu Y, Li J, Yang D (2013) Fabrication and characterisation of α-chitin nanofibers and highly transparent chitin films by pulsed ultrasonication. Carbohydr Polym 98:1497–1504

    Google Scholar 

  116. Chen C, Li D, Hu Q, Wang R (2014) Properties of polymethyl methacrylate-based nanocomposites: reinforced with ultra-long chitin nanofiber extracted from crab shells. Mater Des 1980–2015(56):1049–1056

    Google Scholar 

  117. Garcia I, Azcune I, Casuso P, Carrasco PM, Grande HJ, Cabañero G, Katsigiannopoulos D, Grana E, Dimos K, Karakassides MA, Odriozola I (2015) Carbon nanotubes/chitin nanowhiskers aerogel achieved by quaternization‐induced gelation. J Appl Polym Sci 132:42547–1–9

  118. Fan Y, Fukuzumi H, Saito T, Isogai A (2012) Comparative characterization of aqueous dispersions and cast films of different chitin nanowhiskers/nanofibers. Int J Biol Macromol 50:69–76

    Google Scholar 

  119. De Moura MR, Aouada FA, Avena-Bustillos RJ, McHugh TH, Krochta JM, Mattoso LHC (2009) Improved barrier and mechanical properties of novel hydroxypropyl methylcellulose edible films with chitosan/tripolyphosphate nanoparticles. J Food Eng 92:448–453

    Google Scholar 

  120. Ifuku S, Ikuta A, Egusa M, Kaminaka H, Izawa H, Morimoto M, Saimoto H (2013) Preparation of high-strength transparent chitosan film reinforced with surface-deacetylated chitin nanofibers. Carbohydr Polym 98:1198–1202

    Google Scholar 

  121. Ifuku S, Ikuta A, Izawa H, Morimoto M, Saimoto H (2014) Control of mechanical properties of chitin nanofiber film using glycerol without losing its characteristics. Carbohydr Polym 101:714–717

    Google Scholar 

  122. Antoniou J, Liu F, Majeed H, Zhong F (2015) Characterization of tara gum edible films incorporated with bulk chitosan and chitosan nanoparticles: a comparative study. Food Hydrocolloids 44:309–319

    Google Scholar 

  123. Hosseini SF, Rezaei M, Zandi M, Farahmandghavi F (2015) Fabrication of bio-nanocomposite films based on fish gelatin reinforced with chitosan nanoparticles. Food Hydrocolloids 44:172–182

    Google Scholar 

  124. Qin Y, Zhang S, Yu J, Yang J, Xiong L, Sun Q (2016) Effects of chitin nano-whiskers on the antibacterial and physicochemical properties of maize starch films. Carbohydr Polym 147:372–378

    Google Scholar 

  125. Vahedikia N, Garavand F, Tajeddin B, Cacciotti I, Jafari SM, Omidi T, Zahedi Z (2019) Biodegradable zein film composites reinforced with chitosan nanoparticles and cinnamon essential oil: physical, mechanical, structural and antimicrobial attributes. Biointerfaces Colloids Surf B 177:25–32. https://doi.org/10.1016/j.colsurfb.2019.01.045

    Google Scholar 

  126. Zubair M, Ullah A (2019) Recent advances in protein derived bionanocomposites for food packaging applications. Crit Rev Food Sci Nutr. https://doi.org/10.1080/10408398.2018.1534800

    Google Scholar 

  127. DeFrates K, Markiewicz T, Gallo P, Rack A, Weyhmiller A, Jarmusik B, Hu X (2018) Protein polymer-based nanoparticles: fabrication and medical applications. Int J Mol Sci 19:1–20

    Google Scholar 

  128. Jahanshahi M, Babaei Z (2008) Protein nanoparticle: a unique system as drug delivery vehicles. Afr J Biotechnol 7:4926–4934

    Google Scholar 

  129. Sripriyalakshmi S, Jose P, Ravindran A, Anjali CH (2014) Recent trends in drug delivery system using protein nanoparticles. Cell Biochem Biophys 70:17–26

    Google Scholar 

  130. Davidov-Pardo G, Joye IJ, Espinal-Ruiz M, McClements DJ (2015) Effect of maillard conjugates on the physical stability of zein nanoparticles prepared by liquid antisolvent coprecipitation. J Agric Food Chem 63:8510–8518

    Google Scholar 

  131. Kasaai MR (2017) Zein and zein-based nanoparticles for food packaging applications: a global view. Adv Sci Eng Med 9:439–444

    Google Scholar 

  132. Kasaai MR (2018) Zein and zein- based nano-materials for food and nutrition applications: a review. Trends Food Sci Technol 79:184–197

    Google Scholar 

  133. Zwiorek K, Kloeckner J, Wagner E, Coester C (2005) Gelatin nanoparticles as a new and simple gene delivery system. J Pharm Pharm Sci 7:22–28

    Google Scholar 

  134. Yasmina R, Shaha M, Khan SA, Ali R (2017) Gelatin nanoparticles: a potential candidate for medical applications. Nanotechnol Rev 6:191–207

    Google Scholar 

  135. Wu J, Shi M, Li W, Zhao L, Wang Z, Yan X, Norde W, Li Y (2015) Pickering emulsions stabilized by whey protein nanoparticles prepared by thermal cross-linking. Colloids Surf B 127:96–104

    Google Scholar 

  136. Gülseren İ, Fang Y, Corredig M (2012) Whey protein nanoparticles prepared with desolvation with ethanol: characterization, thermal stability and interfacial behaviour. Food Hydrocolloids 29:258–264

    Google Scholar 

  137. Arzeni C, Pérez OE, Pilosof AMR (2015) Power ultrasound assisted design of egg albumin nanoparticles. Food Biophys 10:439–446

    Google Scholar 

  138. Taheri ES, Jahanshahi M, Mosavian MTH (2012) Preparation, characterization and optimization of egg albumin nanoparticles as low molecular-weight drug delivery vehicle. Part Part Syst Charact 29:211–222

    Google Scholar 

  139. Zhang J, Liang L, Tian Z, Chen L, Subirade M (2012) Preparation and in vitro evaluation of calcium-induced soy protein isolate nanoparticles and their formation mechanism study. Food Chem 133:390–399

    Google Scholar 

  140. Elzoghby A, Helmy Samy, Elgindy NA (2013) Novel ionically crosslinked casein nanoparticles for flutamide delivery: formulation, characterization, and in vivo pharmacokinetics. Int J Nanomed 8:1721–1732. https://doi.org/10.2147/ijn.s40674

    Google Scholar 

  141. Nakagawa K, Kagemoto M (2013) Characterization of casein-based nanoparticles formed upon freezing by in situ SAXS measurement. Colloids Surf B 103:366–374

    Google Scholar 

  142. Li X, Ji N, Qiu C, Xia M, Xiong L, Sun Q (2015) The effect of peanut protein nanoparticles on characteristics of protein- and starch-based nanocomposite films: a comparative study. Ind Crops Prod 77:565–574

    Google Scholar 

  143. Li KK, Yin SW, Yang XQ, Tang CH, Wei ZH (2012) Fabrication and characterization of novel antimicrobial films derived from thymol-loaded zein–sodium caseinate (SC) nanoparticles. J Agric Food Chem 60:11592–11600

    Google Scholar 

  144. Oymaci P, Altinkaya SA (2016) Improvement of barrier and mechanical properties of whey protein isolate based food packaging films by incorporation of zein nanoparticles as a novel bionanocomposite. Food Hydrocolloids 54:1–9

    Google Scholar 

  145. Zhang S, Zhao H (2017) Preparation and properties of zein–rutin composite nanoparticle/corn starch films. Carbohydr Polym 169:385–392

    Google Scholar 

  146. Gul O, Saricaoglu FT, Besir A, Atalar I, Yazici F (2018) Effect of ultrasound treatment on the properties of nano-emulsion films obtained from hazelnut meal protein and clove essential oil. Ultrason Sonochem 41:466–474

    Google Scholar 

  147. Aboul-Anean HED (2018) Using quinoa protein and starch nano particles to produce edible films. J Nut Health Food Eng 8:297–308

    Google Scholar 

  148. Sorrentino A, Gorrasi G, Vittoria V (2007) Potential perspectives of bio-nanocomposites for food packaging applications. Trends Food Sci Technol 18:84–95

    Google Scholar 

  149. Augustin MA, Sanguansri P (2009) Chapter 5 nanostructured materials in the food industry. Adv Food Nutr Res 58:183–213

    Google Scholar 

  150. Zambrano-Zaragoza ML, Mercado-Silva E, Ramirez-Zamorano P, Cornejo-Villegas MA, Gutiérrez-Cortez E, Quintanar-Guerrero D (2013) Use of solid lipid nanoparticles (SLNs) in edible coatings to increase guava (Psidium guajava L.) shelf-life. Food Res Int 51:946–953

    Google Scholar 

  151. Mashaghi S, Jadidi T, Koenderink G, Mashaghi A (2013) Lipid nanotechnology. Int J Mol Sci 14:4242–4282

    Google Scholar 

  152. Naser N, Valizadeh H, Zakeri-Milani P (2015) Solid lipid nanoparticles and nanostructured lipid carrieres: structure, preparation and application. Adv Pharm Bull 5:305–313

    Google Scholar 

  153. Espitia PJP, Fuenmayor CA, Otoni CG (2018) Nanoemulsions: synthesis, characterization, and application in bio-based active food packaging. Compr Rev Food Sci Food Saf 18:264–285. https://doi.org/10.1111/1541-4337.12405

    Google Scholar 

  154. Amoabediny G, Haghiralsadat F, Naderinezhad S, Helder MN, Kharanaghi EA, Arough JM, Zandieh-Doulabi B (2017) Overview of preparation methods of polymeric and lipid-based (niosome, solid lipid, liposome) nanoparticles: a comprehensive review. Int J Polym Mater Polym Biomater 67:383–400

    Google Scholar 

  155. Acevedo-Fani A, Salvia-Trujillo L, Rojas-Graü MA, Martín-Belloso O (2015) Edible films from essential-oil-loaded nanoemulsions: physicochemical characterization and antimicrobial properties. Food Hydrocolloids 47:168–177

    Google Scholar 

  156. Wu J, Liu H, Ge S, Wang S, Qin Z, Chen L, Zheng Q, Liu Q, Zhang Q (2015) The preparation, characterization, antimicrobial stability and in vitro release evaluation of fish gelatin films incorporated with cinnamon essential oil nanoliposomes. Food Hydrocolloids 43:427–435

    Google Scholar 

  157. Cui H, Yuan L, Li W, Lin L (2016) Edible film incorporated with chitosan andArtemisia annuaoil nanoliposomes for inactivation of Escherichia coli O157: H7 on cherry tomato. Int J Food Sci Technol 52:687–698

    Google Scholar 

  158. Hashemi-Gahruie H, Ziaee E, Eskandari MH, Hosseini SMH (2017) Characterization of basil seed gum-based edible films incorporated with Zataria multiflora essential oil nanoemulsion. Carbohydr Polym 166:93–103

    Google Scholar 

  159. Robledo N, Vera P, López L, Yazdani-Pedram M, Tapia C, Abugoch L (2018) Thymol nanoemulsions incorporated in quinoa protein/chitosan edible films; antifungal effect in cherry tomatoes. Food Chem 246:211–219

    Google Scholar 

  160. Frank K, Garcia CV, Shin GH, Kim JT (2018) Alginate biocomposite films incorporated with cinnamon essential oil nanoemulsions: physical, mechanical, and antibacterial properties. Int J Polym Sci 2018:1519407–1–8

  161. Restrepo AE, Rojas JD, Garcia OR, Sanchez LT, Pinzon MI, Villa CC (2018) Mechanical, barrier, and color properties of banana starch edible films incorporated with nanoemulsions of lemongrass (Cymbopogon citratus) and rosemary (Rosmarinus officinalis) essential oils. Food Sci Technol Int 24:705–712. https://doi.org/10.1177/1082013218792133

    Google Scholar 

  162. Crosby AJ, Lee J (2007) Polymer nanocomposites: the “nano” effect on mechanical properties. Polym Rev 47:217–229

    Google Scholar 

  163. Winey KI, Vaia RA (2007) Polymer nanocomposites. MRS Bull 32:314–322

    Google Scholar 

  164. Fiedler B, Gojny FH, Wichmann MHG, Nolte MCM, Schulte K (2006) Fundamental aspects of nano-reinforced composites. Compos Sci Technol 66:3115–3125

    Google Scholar 

  165. Guo D, Xie G, Luo J (2013) Mechanical properties of nanoparticles: basics and applications. J Phys D Appl Phys 47:013001-1–013001-25

    Google Scholar 

  166. Cuenot S, Frétigny C, Demoustier-Champagne S, Nysten B (2004) Surface tension effect on the mechanical properties of nanomaterials measured by atomic force microscopy. Phys Rev B 69:165410-1-5. https://doi.org/10.1103/physrevb.69.165410

  167. ASTM D882–91 (1996) Standard test methods for tensile properties of thin plastic sheeting, annual book of ASTM. American Society for Testing and Materials, Philadelphia

    Google Scholar 

  168. Bertuzzi MA, Vidaurre EFC, Armada M, Gottifredi JC (2007) Water vapor permeability of edible starch based films. J Food Eng 80:972–978

    Google Scholar 

  169. Bertuzzi MA, Gottifredi JC, Armada M (2012) Mechanical properties of a high amylose content corn starch based film, gelatinized at low temperature. Braz J Food Technology 15:219–227

    Google Scholar 

  170. Sahraee S, Milani JM, Ghanbarzadeh B, Hamishehkar H (2017) Physicochemical and antifungal properties of bio-nanocomposite film based on gelatin-chitin nanoparticles. Int J Biol Macromol 97:373–381

    Google Scholar 

  171. Shankar S, Reddy JP, Rhim JW, Kim HY (2015) Preparation, characterization, and antimicrobial activity of chitin nanofibrils reinforced carrageenan nanocomposite films. Carbohydr Polym 117:468–475

    Google Scholar 

  172. Nielsen LE (1967) Models for the permeability of filled polymer systems. J Macromol Sci Part A Chem 1:929–942

    Google Scholar 

  173. Silvestre C, Duraccio D, Cimmino S (2011) Food packaging based on polymer nanomaterials. Prog Polym Sci 36:1766–1782

    Google Scholar 

  174. Lape NK, Nuxoll EE, Cussler EL (2004) Polydisperse flakes in barrier films. J Membr Sci 236:29–37

    Google Scholar 

  175. Aris R (1986) On a problem in hindered diffusion. Arch Ration Mech Anal 95:83–91

    Google Scholar 

  176. Cussler EL, Hughes SE, Ward WJ, Aris R (1988) Barrier membranes. J Membr Sci 38:161–174

    Google Scholar 

  177. Fredrickson GH, Bicerano J (1999) Barrier properties of oriented disk composites. J Chem Phys 110:2181–2188

    Google Scholar 

  178. Gusev AA, Lusti HR (2001) Rational design of nanocomposites for barrier applications. Adv Mater 13:1641–1643

    Google Scholar 

  179. Bharadwaj RK (2001) Modeling the barrier properties of polymer-layered silicate nanocomposites. Macromolecules 34:9189–9192

    Google Scholar 

  180. Wolf C, Angellier-Coussy H, Gontard N, Doghieri F, Guillard V (2018) How the shape of fillers affects the barrier properties of polymer/non-porous particles nanocomposites: a review. J Membr Sci 556:393–418

    Google Scholar 

  181. Park HJ, Chinnan MS (1995) Gas and water vapor barrier properties of edible films from protein and cellulosic materials. J Food Eng 25:497–507

    Google Scholar 

  182. Miller KS, Krochta JM (1997) Oxygen and aroma barrier properties of edible films: a review. Trends Food Sci Technol 8:228–237

    Google Scholar 

  183. ASTM E96–95 (1995) Standard test methods for water vapor transmission of material, annual book of ASTM. American Society for Testing and Materials, Philadelphia

    Google Scholar 

  184. Liz-Marzán LM (2004) Nanometals. Mater Today 7:26–31

    Google Scholar 

  185. Kooij SE, Poelsema B (2006) Shape and size effects in the optical properties of metallic nanorods. Phys Chem Chem Phys 8:3349–3357. https://doi.org/10.1039/b518389h

    Google Scholar 

  186. Choudhury AKR (2014) Object appearance and colour. In: Principles of colour and appearance measurement, pp 53–102. https://doi.org/10.1533/9780857099242.53

  187. Schmidt G, Malwitz MM (2003) Properties of polymer–nanoparticle composites. Curr Opin Colloid Interface Sci 8:103–108

    Google Scholar 

  188. Ray PC (2010) Size and Shape dependent second order nonlinear optical properties of nanomaterials and their application in biological and chemical sensing. Chem Rev 110:5332–5365

    Google Scholar 

  189. Quinten M (2001) The color of finely dispersed nanoparticles. Appl Phys B Lasers Opt 73:317–326

    Google Scholar 

  190. Nobbmann U, Morfesis A (2009) Light scattering and nanoparticles. Mater Today 12:52–54

    Google Scholar 

  191. Yano H, Sugiyama J, Nakagaito AN, Nogi M, Matsuura T, Hikita M, Handa K (2005) Optically transparent composites reinforced with networks of bacterial nanofibers. Adv Mater 17:153–155

    Google Scholar 

  192. Althues H, Henle J, Kaskel S (2007) Functional inorganic nanofillers for transparent polymers. Chem Soc Rev 36:1454–1465. https://doi.org/10.1039/b608177k

    Google Scholar 

  193. Hunter RS (1942) Photoelectric tristimulus colorimetry with three filters. JOSA 32:509–538

    Google Scholar 

  194. Ghasemlou M, Aliheidari N, Fahmi R, Shojaee-Aliabadi S, Keshavarz B, Cran MJ, Khaksar R (2013) Physical, mechanical and barrier properties of corn starch films incorporated with plant essential oils. Carbohydr Polym 98:1117–1126

    Google Scholar 

  195. Flores S, Fama L, Rojas AM, Goyanes S, Gerschenson L (2007) Physical properties of tapioca-starch edible films: influence of filmmaking and potassium sorbate. Food Res Int 40:257–265

    Google Scholar 

  196. McLaren K (1976) XIII—the development of the CIE 1976 (L* a* b*) uniform colour space and colour-difference formula. J Soc Dyers Colour 92:338–341

    Google Scholar 

  197. Robertson AR (1977) The CIE 1976 color-difference formulae. Color Res Appl 2:7–11

    Google Scholar 

  198. Afshari-Jouybari H, Farahnaky A (2011) Evaluation of Photoshop software potential for food colorimetry. J Food Eng 106:170–175

    Google Scholar 

  199. Caglar A, Yamanel K, Gulsahi K, Bagis B, Ozcan M (2010) Could digital imaging be an alternative for digital colorimeters? Clin Oral Investig 14:713–718

    Google Scholar 

  200. Farahnaky A, Saberi B, Majzoobi M (2013) Effect of glycerol on physical and mechanical properties of wheat starch edible films. J Texture Stud 44:176–186

    Google Scholar 

  201. Hosseini SF, Gómez-Guillén MC (2018) A state-of-the-art review on the elaboration of fish gelatin as bioactive packaging: special emphasis on nanotechnology-based approaches. Trends Food Sci Technol 79:125–135

    Google Scholar 

  202. Azeredo HMC, Rosa MF, Mattoso LHC (2017) Nanocellulose in bio-based food packaging applications. Ind Crops Prod 97:664–671

    Google Scholar 

  203. Otoni CG, Avena-Bustillos RJ, Azeredo HMC, Lorevice MV, Moura MR, Mattoso LHC, McHugh TH (2017) Recent advances on edible films based on fruits and vegetables—a review. Compr Rev Food Sci Food Saf 16:1151–1169

    Google Scholar 

  204. Taniguchi T, Okamura K (1998) New films produced from microfibrillated natural fibres. Polym Int 47:291–294

    Google Scholar 

  205. Leitner J, Hinterstoisser B, Wastyn M, Keckes J, Gindl W (2007) Sugar beet cellulose nanofibril-reinforced composites. Cellulose 14:419–425

    Google Scholar 

  206. Shao P, Niu B, Chen H, Sun P (2018) Fabrication and characterization of tea polyphenols loaded pullulan-CMC electrospun nanofiber for fruit preservation. Int J Biol Macromol 107:1908–1914

    Google Scholar 

  207. Souza VGL, Fernando AL (2016) Nanoparticles in food packaging: biodegradability and potential migration to food—a review. Food Packag Shelf Life 8:63–70

    Google Scholar 

  208. Janjarasskul T, Krochta JM (2010) Edible packaging materials. Annu Rev Food Sci Technol 1:415–448

    Google Scholar 

  209. Cooksey K (2001) Antimicrobial food packaging materials. Addit Polym 2001:6–10

    Google Scholar 

  210. Sanchez-Gonzalez L, Vargas M, Gonzalez-Martınez C, Chiralt A, Chafer M (2011) Use of essential oils in bioactive edible coatings. Food Eng Rev 3:1–16

    Google Scholar 

  211. Cuq B, Gontard N, Guilbert S (1998) Proteins as agricultural polymers for packaging production. Cereal Chem 75:1–9

    Google Scholar 

  212. Hernandez O, Emaldi U, Tovar J (2008) In vitro digestibility of edible films from various starch sources. Carbohydr Polym 71:648–655

    Google Scholar 

  213. Kim-Kang H (1990) Volatiles in packaging materials. Crit Rev Food Sci Nutr 29:255–271

    Google Scholar 

  214. Vargas M, Pastor C, Chiralt A, McClements DJ, González-Martínez C (2008) Recent advances in edible coatings for fresh and minimally processed fruits. Crit Rev Food Sci Nutr 48:496–511

    Google Scholar 

  215. Weiss J, Takhistov P, McClements J (2006) Functional materials in food nanotechnology. J Food Sci 71:R107–R116

    Google Scholar 

  216. Falguera V, Quintero JP, Jimenez A, Munoz JA, Ibarz A (2011) Edible films and coatings: structures, active functions and trends in their use. Trends Food Sci Technol 22:292–303

    Google Scholar 

  217. Magnuson BA, Jonaitis TS, Card JW (2011) A brief review of the occurrence, use, and safety of food-related nanomaterials. J Food Sci 76:R126–R133

    Google Scholar 

  218. Sekhon SB (2010) Food nanotechnology—an overview. Nanotechnol Sci Appl 3:1–15

    Google Scholar 

  219. Zhang S, Gu W, Cheng Z, Li YY, Gu W (2014) Development of Edible Packaging Materials. Adv Mater Res 904:189–191

    Google Scholar 

  220. Siqueira G, Bras J, Dufresne A (2010) Cellulosic bionanocomposites: a review of preparation. Prop Appl Polym 2:728–765

    Google Scholar 

  221. Solans C, Solé I (2012) Nano-emulsions: formation by low-energy methods. Curr Opin Colloid Interface Sci 17:246–254

    Google Scholar 

  222. Abdul-Khalil HPS, Davoudpour Y, Islam MN, Mustapha A, Sudesh K, Dungani R, Jawaid M (2014) Production and modification of nanofibrillated cellulose using various mechanical processes: a review. Carbohydr Polym 99:649–665

    Google Scholar 

  223. Krochta JM, Mulder-Johnston CD (1997) Edible and biodegradable polymer films: challenges and opportunities. Food Technol 51:61–74

    Google Scholar 

  224. Kaya S, Kaya A (2000) Microwave drying effects on properties of whey protein isolate edible films. J Food Eng 43:91–96

    Google Scholar 

  225. Mayachiew P, Devahastin S (2008) Comparative evaluation of physical properties of edible chitosan films prepared by different drying methods. Dry Technol 26:176–185

    Google Scholar 

  226. Thakhiew W, Devahastin S, Soponronnarit S (2010) Effects of drying methods and plasticizer concentration on some physical and mechanical properties of edible chitosan films. J Food Eng 99:216–224

    Google Scholar 

  227. De Moraes JO, Laurindo JB (2017) Properties of starch–cellulose fiber films produced by tape casting coupled with infrared radiation. Dry Technol 36:830–840

    Google Scholar 

  228. Ortiz CM, de Moraes JO, Vicente AR, Laurindo JB, Mauri AN (2017) Scale-up of the production of soy (Glycine max L.) protein films using tape casting: formulation of film-forming suspension and drying conditions. Food Hydrocolloids 66:110–117

    Google Scholar 

  229. Munhoz DR, Moreira FKV, Bresolin JD, Bernardo MP, De Sousa CP, Mattoso LHC (2018) Sustainable production and in vitro biodegradability of edible films from yellow passion fruit coproducts via continuous casting. ACS Sustain Chem Eng 6:9883–9892

    Google Scholar 

  230. Ozdemir M, Floros JD (2004) Active food packaging technologies. Crit Rev Food Sci Nutr 44:185–193

    Google Scholar 

  231. Abdul-Khalil HPS, Davoudpour Y, Saurabh CK, Hossain MS, Adnan AS, Dungani R, Haafiz MKM (2016) A review on nanocellulosic fibres as new material for sustainable packaging: process and applications. Renew Sustain Energy Rev 64:823–836

    Google Scholar 

  232. Debeaufort F, Quezada-Gallo JA, Voilley A (1998) Edible films and coatings: tomorrow’s packagings: a review. Crit Rev Food Sci Nutr 38:299–313

    Google Scholar 

  233. Mihindukulasuriya SDF, Lim LT (2014) Nanotechnology development in food packaging: a review. Trends Food Sci Technol 40:149–167

    Google Scholar 

  234. Dhall RK (2013) Advances in edible coatings for fresh fruits and vegetables: a review. Crit Rev Food Sci Nutr 53:435–450

    Google Scholar 

  235. Hannon JC, Kerry J, Cruz-Romero M, Morris M, Cummins E (2015) Advances and challenges for the use of engineered nanoparticles in food contact materials. Trends Food Sci Technol 43:43–62

    Google Scholar 

  236. Han JW, Ruiz-Garcia L, Qian JP, Yang XT (2018) Food packaging: a comprehensive review and future trends. Compr Rev Food Sci Food Saf 17:860–877

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Jeya Jeevahan.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Jeevahan, J., Chandrasekaran, M. Nanoedible films for food packaging: a review. J Mater Sci 54, 12290–12318 (2019). https://doi.org/10.1007/s10853-019-03742-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-019-03742-y

Navigation