[go: up one dir, main page]
More Web Proxy on the site http://driver.im/
Skip to main content
Springer Nature Link
Log in

Simulation of 3D Volume Filling with Non-Spherical and Spherical Titanium Alloy Powder Particles for Additive Manufacturing

  • Published:
Cybernetics and Systems Analysis Aims and scope

Abstract

The authors have developed an approach to modeling the layer-by-layer filling of the particular 3D volume with a combination of non-spherical and spherical powder particles of different fractional compositions. They have used the phi-function technique and constructed the mathematical model of the problem of packing regular and irregular freely moving objects. They also proposed the heuristic algorithm that uses nonlinear optimization for calculating packing density/porosity factor. The authors compared the results of numerical modeling with experimental data obtained for the mixture of spherical and polyhedral powders of titanium alloys. They have established that the percentage ratio of powder particles within the investigated fraction, obtained using the developed algorithm, corresponds with high accuracy to the experimental results. This finding indicates the possibility of using numerical modeling results instead of costly experimental studies. The use of mathematical modeling and optimization techniques in additive manufacturing makes it possible to improve the efficiency of each stage of the technological process, reduce the number of defective products, and rationally plan the consumption of energy and material resources.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
£29.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (United Kingdom)

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Explore related subjects

Discover the latest articles, news and stories from top researchers in related subjects.

References

  1. A. Alfaify, M. Saleh, F. M. Abdullah, and A. M. Al-Ahmari, “Design for additive manufacturing: A systematic review,” Sustainability, Vol. 12, Iss. 19, 7936 (2020). https://doi.org/10.3390/su12197936.

  2. J. Zhou, Y. Zhang, and J. K. Chen, “Numerical simulation of random packing of spherical particles for powder-based additive manufacturing,” J. Manuf. Sci. Eng., Vol. 131, No. 3, 031004 (2009). https://doi.org/10.1115/1.3123324.

    Article  Google Scholar 

  3. C. Meier, R. W. Penny, Y. Zou, J. S. Gibbs, and A. J. Hart, “Thermophysical phenomena in metal additive manufacturing by selective laser melting: Fundamentals, modeling, simulation and experimentation,” Annu. Rev. Heat Transf., Vol. 20, 241–316 (2017). https://doi.org/10.1615/AnnualRevHeatTransfer.2018019042.

    Article  Google Scholar 

  4. M. Markl and C. Korner, “Multiscale modeling of powder bed-based additive manufacturing,” Annu. Rev. Mater. Res., Vol. 46, 93–123 (2016). https://doi.org/10.1146/annurev-matsci-070115-032158.

    Article  Google Scholar 

  5. J. Zhang and Y.-G. Jung (eds.), Additive Manufacturing: Materials, Processes, Quantifications and Applications. Butterworth-Heinemann (2018). https://doi.org/10.1016/C2016-0-01595-4.

  6. R. Pederson, J. Andersson, and Sh. Joshi, Additive Manufacturing of High-Performance Metallic Materials, Elsevier (2023).

  7. O. V. Ovchynnykov, Z. A. Duriagina, T. E. Romanova, I. A. Lemishka, O. V. Pankratov, V. V. Kulyk, Y. F. Basov, and M. V. Khaznaferov, Titanium Alloy Powders for Additive Technologies: Structure, Properties, Modeling [in Ukrainian], Naukova Dumka, Kyiv (2021).

    Google Scholar 

  8. Z. Zhao, L. Li, L. Tan, P. Bai, J. Li, L. Wu, H. Liao, and Y. Cheng, “Simulation of stress field during the selective laser melting process of the nickel-based superalloy, GH4169,” Materials, Vol. 11, No. 9, 1525 (2018). https://doi.org/10.3390/ma11091525.

    Article  Google Scholar 

  9. A. Gebhardt, Understanding Additive Manufacturing: Rapid Prototyping, Rapid Tooling, Rapid Manufacturing, 1st ed., Hanser Publications (2011). https://doi.org/10.3139/9783446431621.fm.

  10. J. Chen, W. Hou, X. Wang, S. Chu, and Z. Yang, “Microstructure, porosity and mechanical properties of selective laser melted AlSi10Mg,” Chin. J. Aeronaut., Vol. 33, Iss. 7, 2043–2054 (2020). https://doi.org/10.1016/j.cja.2019.08.017.

  11. D. Svyetlichnyy, “Model of the selective laser melting process-powder deposition models in multistage multi-material simulations,” Appl. Sci., Vol. 13, Iss. 10, 6196 (2023). https://doi.org/10.3390/app13106196.

  12. M. Hifi, A. Mohamed-Youssouf, L. Yousef, “A threshold search-based population algorithm for the sphere packing problem,” Knowl.-Based Syst., Vol. 261, 110177 (2023). https://doi.org/10.1016/j.knosys.2022.110177.

  13. T. E. Romanova, P. I. Stetsyuk, A. Fischer, and G. M. Yaskov, “Proportional packing of circles in a circular container,” Cybern. Syst. Analysis, Vol. 59, No. 1, 82–89 (2023). https://doi.org/10.1007/s10559-023-00544-8.

    Article  Google Scholar 

  14. R. M’Hallah, A. Alkandari, and N. Mladenovic, “Packing unit spheres into the smallest sphere using VNS and NLP,” Comput. Oper. Res., Vol. 40, Iss. 2, 603–615 (2013). https://doi.org/10.1016/j.cor.2012.08.019.

  15. B. Zhao, X. An, Y. Wang, H. Zhao, L. Shen, X. Sun, and R. Zou, “Packing of different shaped tetrahedral particles: DEM simulation and experimental study,” Powder Technol., Vol. 360, 21–32 (2020). https://doi.org/10.1016/j.powtec.2019.09.072.

    Article  Google Scholar 

  16. B. Zhao, X. An, H. Zhao, D. Gou, L. Shen, X. Sun, “DEM simulation on random packings of binary tetrahedron-sphere mixtures,” Powder Technol., Vol. 361, 160–170 (2020). https://doi.org/10.1016/j.powtec.2019.09.055.

    Article  Google Scholar 

  17. J. Li, X. An, J. Wang, H. Zhao, R. Zou, K. Dong, and D. Gou, “Experimental study on 3D vibrated packing densification of mono-sized dodecahedral particles,” Powder Technol., Vol. 367, 703–712 (2020). https://doi.org/10.1016/j.powtec.2020.04.020.

    Article  Google Scholar 

  18. L. J. P. Araújo, E. Ozcan, J. A. D. Atkin, and M. Baumers, “Analysis of irregular three-dimensional packing problems in additive manufacturing: A new taxonomy and dataset,” Int. J. Prod. Res., Vol. 57, Iss. 18, 5920–5934 (2019). https://doi.org/10.1080/00207543.2018.1534016.

  19. E. M. Kiseleva, “The emergence and formation of the theory of optimal set partitioning for sets of the n-dimensional euclidean space. Theory and application,” J. Autom. Inform. Sci., Vol. 50, Iss. 9, 1–24 (2018). https://doi.org/10.1615/JAutomatInfScien.v50.i9.10.

  20. T. Romanova, I. Litvinchev, and A. Pankratov, “Packing ellipsoids in an optimized cylinder,” Eur. J. Oper. Res., Vol. 285, Iss. 2, 429–443 (2020). https://doi.org/10.1016/j.ejor.2020.01.051.

  21. J. Kallrath, “Cutting and packing beyond and within mathematical programming,” in: Business Optimization Using Mathematical Programming, 2nd ed., International Series in Operations Research & Management Science, Vol. 307, Springer, Cham (2021), pp 495–526 https://doi.org/10.1007/978-3-030-73237-0_15.

  22. Z. A., Duriagina, I. A. Lemishka, A. M. Trostianchyn, V. V. Kulyk, S. G. Shvachko, T. L. Tepla, E. I. Pleshakov, and T. M. Kovbasyuk, “The effect of morphology and particle-size distribution of VT20 titanium alloy powders on the mechanical properties of deposited coatings,” Powder Metall. Met. Ceram., Vol. 57, Iss. 11–12, 697–702 (2019). https://doi.org/10.1007/s11106-019-00033-8.

  23. Z. Duriagina, I. Lemishka, I. Litvinchev, J. A. Marmolejo, A. Pankratov, T. Romanova, and G. Yaskov, “Optimized filling of a given cuboid with spherical powders for additive manufacturing,” J. Oper. Res. Soc. China, Vol. 9, No. 4, 853–868 (2021). https://doi.org/10.1007/s40305-020-00314-9.

    Article  MathSciNet  Google Scholar 

  24. Z. Duriagina, A. Pankratov, T. Romanova, I. Litvinchev, J. Bennel, I. Lemishka, and S. Maximov, “Optimized packing titanium alloy powder particles,” Computation, Vol. 11, Iss. 2, 22 (2023). https://doi.org/10.3390/computation11020022.

  25. A. Verguet, C. Messaoudi, S. Marco, and P. Donnadieu, “An ImageJ tool for simplified post-treatment of TEM phase contrast images (SPCI),” Micron, Vol. 121, 90–98 (2019). https://doi.org/10.1016/j.micron.2019.01.006.

    Article  Google Scholar 

  26. OriginLab. User Guide. URL: http://www.originlab.com/doc/User-Guide.

Download references

Author information

Authors and Affiliations

  1. A. Pidhornyi Institute of Mechanical Engineering Problems, National Academy of Sciences of Ukraine, Kharkiv, Ukraine

    Yu. Stoyan & O. Pankratov

  2. Lviv Polytechnic National University, Lviv, Ukraine

    I. Lemishka & Z. Duriagina

  3. University of Leeds, Leeds, England

    J. Bennell & T. Romanova

  4. A. Pidhornyi Institute of Mechanical Engineering Problems, National Academy of Sciences of Ukraine, Kharkiv National University of Radio Electronics, Kharkiv, Ukraine

    T. Romanova

  5. V. M. Glushkov Institute of Cybernetics, National Academy of Sciences of Ukraine, Kyiv, Ukraine

    P. Stetsyuk

Authors
  1. Yu. Stoyan
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. O. Pankratov
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. I. Lemishka
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Z. Duriagina
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. J. Bennell
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. T. Romanova
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. P. Stetsyuk
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Yu. Stoyan.

Additional information

The study was supported by the National Research Foundation of Ukraine (Grant #2020.02/167), Volkswagen Foundation (Grant #97775), and British Academy (Grant #100072).

Translated from Kibernetyka ta Systemnyi Analiz, No. 3, May–June, 2024, pp. 97–108; DOI https://doi.org/10.34229/KCA2522-9664.24.3.9.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Stoyan, Y., Pankratov, O., Lemishka, I. et al. Simulation of 3D Volume Filling with Non-Spherical and Spherical Titanium Alloy Powder Particles for Additive Manufacturing. Cybern Syst Anal 60, 422–432 (2024). https://doi.org/10.1007/s10559-024-00683-6

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10559-024-00683-6

Keywords

Search

Navigation