Abstract
The present article is dedicated to analyze the flow and heat transfer of carbon nanotube (CNT)-based nanofluids under the effects of velocity slip in a channel with non-parallel walls. Water is taken as a base fluid, and two forms of CNTs are used to perform the analysis, namely the single- and multi-walled carbon nanotubes (SWCNTs and MWCNTs, respectively). Both the cases of narrowing and widening channel are discussed. The equations governing the flow are obtained by using an appropriate similarity transform. Numerical solution is obtained by using a well-known algorithm called Runge–Kutta–Fehlberg method. The influence of involved parameters on dimensionless velocity and temperature profiles is displayed graphically coupled with comprehensive discussions. Also, to verify the numerical results, a comparative analysis is carried out that ensures the authenticity of the results. Variation of skin friction coefficient and the rate of heat transfer at the walls are also performed. Some already existing solutions of the particular cases of the same problem are also verified as the special cases of the solutions obtained here.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
Jeffery GB (1915) The two-dimensional steady motion of a viscous fluid. Phil Mag 6:455–465
Hamel G (1916) Spiralförmige Bewgungen Zäher Flüssigkeiten, Jahresber. Deutsch Math Verein 25:34–60
Goldstein S (1938) Modern developments in fluid mechanics. Clarendon Press, Oxford
Rosenhead L (1940) The steady two-dimensional radial flow of viscous fluid between two inclined plane walls. Proc R Soc A 175:436–467
Fraenkel LE (1962) On the Jeffery–Hamel solutions for flow between plane walls. Proc R Soc A 267:119–138
Batchelor K (1967) An introduction to fluid dynamics. Cambridge University Press, Cambridge
Sadri R (1997) Channel entrance flow. PhD thesis, Dept. Mechanical Engineering, the University of Western Ontario
Hayat T, Nawaz M, Sajid M (2010) Effect of heat transfer on the flow of a second-grade fluid in divergent/convergent channel. Int J Numer Methods Fluids 64:761–766
Asadullah M, Khan U, Manzoor R, Ahmed N, Mohyud-Din ST (2013) MHD flow of a Jeffery fluid in converging and diverging channels. Int J Mod Math Sci 6(2):92–106
Choi SUS (1995) Enhancing thermal conductivity of fluids with nanoparticle. In: Siginer DA, Wang HP (eds) Developments and applications of non-newtonian flows, ASME FED, vol 231/MD-vol 66, pp 99–105
Choi SUS, Zhang ZG, Yu W, Lockwood FE, Grulke EA (2001) Anomalously thermal conductivity enhancement in nanotube suspensions. Appl Phys Lett 79:2252–2254
Hamilton RL, Crosser OK (1962) Thermal conductivity of heterogeneous two component systems. Ind Eng Chem Fundam 1(3):187–191
Buongiorno J (2006) Convective transport in nanofluids. ASME J Heat Transfer 128:240–250
Xue Q (2005) Model for thermal conductivity of carbon nanotube-based composites. Phys B 368:302–307
Maxwell JC (1904) Electricity and magnetism, 3rd edn. Clarendon, Oxford
Anwar MI, Sharidan S, Khan I, Salleh MZ (2014) Magnetohydrodynamic flow of a nanofluid over a nonlinearly stretching sheet. Indian J Chem Technol 21:199–204
Khalid A, Khan I, Shafie S (2015) Exact solutions for free convection flow of nanofluids with ramped wall temperature. Eur Phys J Plus 130(57)
Ali F, Khan I, Ulhaq S, Mustapha N, Shafie S (2012) Unsteady magnetohydrodynamic oscillatory flow of viscoelastic fluids in a porous channel with heat and mass transfer. J Phys Soc Jpn 81(6)
Mabood F, Khan WA, Ismail AIM (2015) MHD boundary layer flow and heat transfer of nanofluids over a nonlinear stretching sheet: a numerical study. J Magn Magn Mater 374:569–576
Sheikholeslami M, Ganji DD, Javed MY, Ellahi R (2015) Effect of thermal radiation on magnetohydrodynamics nanofluid flow and heat transfer by means of two phase model. J Magn Magn Mater 374:36–43
Nadeem S, Haq RU (2013) Effect of thermal radiation for megnetohydrodynamic boundary layer flow of a nanofluid past a stretching sheet with convective boundary conditions. J Comput Theor Nanosci 11:32–40
Khan U, Ahmed N, Khan SIU, Mohyud-din ST (2014) Thermo-diffusion and MHD effects on stagnation point flow towards a stretching sheet in a nanofluid. Propuls Power Res 3(3):151–158
Ellahi R, Hameed M (2012) Numerical analysis of steady flows with heat transfer, MHD and nonlinear slip effects. Int J Numer Methods Heat Fluid Flow 22(1):24–38
Sheikholeslami M, Ellahi R, Hassan M, Soleimani S (2014) A study of natural convection heat transfer in a nanofluid filled enclosure with elliptic inner cylinder. Int J Numer Methods Heat Fluid Flow 24(8):1906–1927
Nawaz M, Zeeshan A, Ellahi R, Abbasbandy S, Rashidi S (2015) Joules heating effects on stagnation point flow over a stretching cylinder by means of genetic algorithm and Nelder–Mead method. Int J Numer Methods Heat Fluid Flow 25(3):665–684
Hatami M, Ganji DD (2014) MHD nanofluid flow analysis in divergent and convergent channels using WRMs and numerical method. Int J Numer Methods Heat Fluid Flow 24(5):1191–1203
Sheikholeslami M, Ganji DD, Ashorynejad HR, Rokni HB (2012) Analytical investigation of Jeffery–Hamel flow with high magnetic field and nanoparticle by Adomian decomposition method. Appl Math Mech Engl Ed 33:25–36
Mohyud-Din ST, Khan U, Ahmed N, Sikander W (2015) A study of velocity and temperature slip effects on flow of water based nanofluids in converging and diverging channels. Int J Appl Comput Math. doi:10.1007/s40819-015-0032-z
Ganji DD, Hatami M (2014) Three weighted residual methods based on Jeffery–Hamel flow. Int J Numer Methods Heat Fluid Flow 24(5):1191–1203
Iijima S (1991) Helical microtubules of graphitic carbon. Nature 354:56–58
Endo M, Hayashi T, Kim YA, Terrones M, Dresselhaus MS (2004) Applications of carbon nanotubes in the twenty-first century. Philos Trans R Soc Lond A 362:2223−2238
Saito R, Dresselhaus G, Dresselhaus MS (2001) Physical properties of carbon nanotubes. Imperial College Press, Singapore
Murshed SM, Nieto de Castro CA, Lourenço MJV, Lopes MLM, Santos FJV (2011) A review of boiling and convective heat transfer with nanofluids. Renew Sustain Energy Rev 15:2342–2354
Khan U, Ahmed N, Zaidi ZA, Asadullah M, Mohyud-Din ST (2015) Effects of velocity slip and temperature jump on Jeffery Hamel flow with heat transfer. Eng Sci Technol. doi:10.1016/j.jestch.2014.09.001
Khan WA, Khan ZH, Rahi M Fluid flow and heat transfer of carbon nanotubes along a flat plate with Navier slip boundary. Appl Nanosci. doi:10.1007/s13204-013-0242-9
Ul R, Haq S, Nadeem ZH, Khan NFM (2015) Noor, convective heat transfer in MHD slip flow over a stretching surface in the presence of carbon nanotubes. Phys B 457:40–47
Akbar NS, Butt AW (2014) CNT suspended nanofluid analysis in a flexible tube with ciliated walls. Eur Phys J Plus 129(8):1–10
Motsa SS, Sibanda P, Marewo GT (2012) On a new analytical method for flow between two inclined walls. Numer Algorithms 61:499–514
Turkyilmazoglu M (2014) Extending the traditional Jeffery–Hamel flow to stretchable convergent/divergent channels. Comput Fluids 100:196–203
Acknowledgments
The authors are grateful to the anonymous reviewers for their comments and suggestions that really helped in improving the quality of the article.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Khan, U., Ahmed, N. & Mohyud-Din, S.T. Heat transfer effects on carbon nanotubes suspended nanofluid flow in a channel with non-parallel walls under the effect of velocity slip boundary condition: a numerical study. Neural Comput & Applic 28, 37–46 (2017). https://doi.org/10.1007/s00521-015-2035-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00521-015-2035-4