Abstract
In this paper, a novel two-stage structural damage detection method using modal flexibility and strain energy-based index (MFSEBI) and modified teaching–learning-based optimization (MTLBO) algorithm is proposed. In the first stage, a novel damage index (MFSEBI) is proposed based on the combination of two structural modal properties including modal strain energy of elements and diagonal members of the structural flexibility matrix to identify the suspected damaged elements. The performance of this indicator is compared with the performance of an indicator derived from the modal strain energy. As the change in the structural modal properties is also affected by environmental variations, in this study, the effect of varying environmental conditions on the performance of the MFSEBI is also examined. In the second stage, the modal response of the structure is used and subsequently updated by MLTBO to estimate the damage extents of the suspected elements. At this stage, the MTLBO algorithm is proposed by enhancing the teaching and learning quality of the TLBO algorithm using new updating mechanisms of each learner position. The performance of the MTLBO and TLBO algorithms is compared in terms of the accuracy of the results and convergence rate. The results of three numerical examples indicate a better performance of the MFSEBI index in damage localization using a smaller number of mode shapes. These results also demonstrate the higher accuracy of the estimated damage extents and the faster convergence rate of the objective function using MTLBO, even with the consideration of measurement noise effects.
Similar content being viewed by others
Notes
International Association for Structural Control – American Society of Civil Engineers.
References
Rescalvo FJ, Suarez E, Valverde-Palacios I et al (2018) Health monitoring of timber beams retrofitted with carbon fiber composites via the acoustic emission technique. Compos Struct 206:392–402
Valvona F, Toti J, Gattulli V, Potenza F (2017) Effective seismic strengthening and monitoring of a masonry vault by using glass fiber reinforced cementitious matrix with embedded fiber Bragg grating sensors. Compos B Eng 113:355–370
Nedushan BA, Chouinard LE (2003) Use of artificial neural networks for real time analysis of dam monitoring data. In: Annual Conference of the Canadian Society for Civil Engineering, pp 4–7
Chouinard LE, Nedushan BA, Feknous N (1996) Statistical analysis in real time of monitoring data for Idukki arch dam. In: 2nd International conference on dam safety evaluation, Trivandrum, India, 1996, pp 381–385
Khatir S, Wahab MA, Djilali B, Khatir T (2019) Structural health monitoring using modal strain energy damage indicator coupled with teaching-learning-based optimization algorithm and isogoemetric analysis. J Sound Vib 448:230–246. https://doi.org/10.1016/j.jsv.2019.02.017
Dinh-Cong D, Vo-Duy T, Ho-Huu V, Nguyen-Thoi T (2019) Damage assessment in plate-like structures using a two-stage method based on modal strain energy change and Jaya algorithm. Inverse Probl Sci Eng 27:166–189. https://doi.org/10.1080/17415977.2018.1454445
Ghiasi R, Ghasemi MR, Noori M (2018) Comparative studies of metamodeling and AI-based techniques in damage detection of structures. Adv Eng Softw. https://doi.org/10.1016/j.advengsoft.2018.02.006
Seyedpoor SM, Montazer M (2016a) A two-stage damage detection method for truss structures using a modal residual vector based indicator and differential evolution algorithm. Smart Struct Syst 17:347–361. https://doi.org/10.12989/sss.2016.17.2.347
Fathnejat H, Torkzadeh P, Salajegheh E, Ghiasi R (2014) Structural damage detection by model updating method based on cascade feed-forward neural network as an efficient approximation mechanism. Int J Optim Civil Eng 4:451–472
Wu JR, Li QS (2006) Structural parameter identification and damage detection for a steel structure using a two-stage finite element model updating method. J Constr Steel Res 62:231–239. https://doi.org/10.1016/j.jcsr.2005.07.003
Fathnejat H, Ahmadi-Nedushan B (2020) An efficient two-stage approach for structural damage detection using meta-heuristic algorithms and group method of data handling surrogate model. Front Struct Civil Eng 14:907–929. https://doi.org/10.1007/s11709-020-0628-1
Farrar CR, Doebling SW, Nix DA (2001) Vibration-based structural damage identification. Philos Trans R Soc Lond A Math Phys Eng Sci 359:131–149
Fathnejat H, Ahmadi-Nedushan B (2017) Structural damage detection by sensitivity-based method and cascade feed-forward neural network based on proper orthogonal modes. In: 6th National and 2nd international conference on new materials and structures in civil engineering, Yazd, Iran, 2017.
Gomes GF, Mendez YAD, da Alexandrino PSL et al (2018) A review of vibration based inverse methods for damage detection and identification in mechanical structures using optimization algorithms and ANN. Arch Comput Methods Eng 4:1–15. https://doi.org/10.1007/s11831-018-9273-4
Huth O, Feltrin G, Maeck J et al (2005) Damage identification using modal data : experiences on a prestressed concrete bridge. J Struct Eng 131:1898–1910
Doebling S, Farrar C (1998) A summary review of vibration-based damage identification methods. Shock Vib Dig 30:91–105
Torkzadeh P, Fathnejat H, Ghiasi R (2016) Damage detection of plate-like structures using intelligent surrogate model. Smart Struct Syst 18:1233–1250. https://doi.org/10.12989/sss.2016.18.6.1233
Hakim SJS, Razak HA (2014) Modal parameters based structural damage detection using artificial neural networks—a review. Smart Struct Syst 14:159–189. https://doi.org/10.12989/sss.2014.14.2.159
Cha YY-J, Buyukozturk O (2015) Structural damage detection using modal strain energy and hybrid multiobjective optimization. Comput Aided Civil Infrastruct Eng 30:347–358. https://doi.org/10.1111/mice.12122
Carrasco CJ, Osegueda RA, Ferregut CM, Grygier M (1997) Damage localization in a space truss model using modal strain energy. In: Proceedings-SPIE the international society for optical engineering. SPIE International Society for optical, pp 1786–1792
Montazer M, Seyedpoor SM (2014) A new flexibility based damage index for damage detection of truss structures. Shock Vib. https://doi.org/10.1155/2014/460692
Adewuyi AP, Wu ZS (2011) Modal macro-strain flexibility methods for damage localization in flexural structures using long-gage FBG sensors. Struct Control Health Monit 18:341–360
Nobahari M, Seyedpoor SM (2013) An efficient method for structural damage localization based on the concepts of flexibility matrix and strain energy of a structure. Struct Eng Mech 46:231–244. https://doi.org/10.12989/sem.2013.46.2.231
Yan A-M, Kerschen G, De Boe P, Golinval J-C (2005) Structural damage diagnosis under varying environmental conditions—part I: a linear analysis. Mech Syst Signal Process 19:847–864
Shokrani Y, Dertimanis VK, Chatzi EN, Savoia M (2018) On the use of mode shape curvatures for damage localization under varying environmental conditions. Struct Control Health Monit. https://doi.org/10.1002/stc.2132
Xu M, Wang S, Li H (2019) A residual strain energy based damage localisation method for offshore platforms under environmental variations. Ships Offshore Struct 14:747–754. https://doi.org/10.1080/17445302.2018.1558727
Sheikhi Azqandi M, Delavar M, Arjmand M (2019) An enhanced time evolutionary optimization for solving engineering design problems. Eng Comput. https://doi.org/10.1007/s00366-019-00729-w
Varaee H, Ghasemi MR (2017) Engineering optimization based on ideal gas molecular movement algorithm. Eng Comput 33:71–93. https://doi.org/10.1007/s00366-016-0457-y
Shakiba M, Ahmadi-Nedushan B (2012) A computationally efficient hybrid approach for engineering optimization problems. Int J Adv Comput Inf Technol 1:416–433
Ahmadi-Nedushan B, Varaee H (2009) Optimal design of reinforced concrete retaining walls using a swarm intelligence technique. In: Proceedings of the first international conference on soft computing technology in civil, structural and environmental engineering
Shakiba M, Ahmadi-Nedushan B (2009) Engineering optimization using opposition based differential evolution. In: Proceedings of the first international conference on soft computing technology in civil, structural and environmental engineering, Funchal, Madeira, Portugal, Civil-Comp Press, Stirlingshire, UK
Varaee H, Ahmadi-Nedushan B (2011) Minimum cost design of concrete slabs using particle swarm optimization with time varying acceleration coefficients. World Appl Sci J 13:2484–2494
Ahmadi-Nedushan B (2012a) An optimized instance based learning algorithm for estimation of compressive strength of concrete. Eng Appl Artif Intell 25:1073–1081. https://doi.org/10.1016/j.engappai.2012.01.012
Ahmadi-Nedushan B (2012b) Prediction of elastic modulus of normal and high strength concrete using ANFIS and optimal nonlinear regression models. Constr Build Mater 36:665–673. https://doi.org/10.1016/j.conbuildmat.2012.06.002
Ghiasi R, Fathnejat H, Torkzadeh P (2019) A three-stage damage detection method for large-scale space structures using forward substructuring approach and enhanced bat optimization algorithm. Eng Comput 35:857–874. https://doi.org/10.1007/s00366-018-0636-0
Ghasemi MR, Nobahari M, Shabakhty N (2018) Enhanced optimization-based structural damage detection method using modal strain energy and modal frequencies. Eng Comput 34:637–647. https://doi.org/10.1007/s00366-017-0563-5
Jahangiri M, Ahmadi-Nedushan B (2017) Structural damage identification using MOPSO and MOEA/D multi-objective evolutionary optimization algorithms. Ferdowsi Civil Eng J 30:63–78
Jahangiri M, Behrouz A-N, Hossienali RB (2015) Application of single-objective optimization techniques for structural health monitoring. In: 2nd International and 6th national conference on earthquake and structures. ACECR of Kerman, Kerman, Iran
Jahangiri M, Ahmadi-Nedushan B, Rahimi Bondarabadi H (2015) Structural damage localization and quantification based on multi-objective optimization method. In: 2nd International and 6th national conference on earthquake and structures, at ACECR of Kerman, ACECR of Kerman, Kerman, Iran
Kim H-J, Park W, Koh H-M, Choo JF (2013) Identification of structural performance of a steel-box girder bridge using machine learning technique. IABSE Symp Rep 99:428–429. https://doi.org/10.2749/222137813806501939
Alkayem NF, Cao M, Zhang Y et al (2018) Structural damage detection using finite element model updating with evolutionary algorithms: a survey. Neural Comput Appl 30:389–411
Seyedpoor SM, Montazer M (2016b) A damage identification method for truss structures using a flexibility-based damage probability index and differential evolution algorithm. Inverse Probl Sci Eng 24:1303–1322. https://doi.org/10.1080/17415977.2015.1101761
Dinh-Cong D, Vo-Duy T, Nguyen-Thoi T (2018) Damage assessment in truss structures with limited sensors using a two-stage method and model reduction. Appl Soft Comput 66:264–277. https://doi.org/10.1016/j.asoc.2018.02.028
Rao RV (2014) Teaching-learning-based optimization algorithm. Intell Syst Ref Libr 62:211–216. https://doi.org/10.1007/978-3-319-03404-1_16
Dede T (2013) Optimum design of grillage structures to LRFD-AISC with teaching-learning based optimization. Struct Multidiscip Optim 48:955–964. https://doi.org/10.1007/s00158-013-0936-3
Rao RV, Rao RV (2015) Applications of TLBO algorithm and its modifications to different engineering and science disciplines. Teaching learning based optimization algorithm. Springer, Cham, pp 223–267
Satapathy SC, Naik A (2014) Modified teaching-learning-based optimization algorithm for global numerical optimization—a comparative study. Swarm Evol Comput 16:28–37. https://doi.org/10.1016/j.swevo.2013.12.005
Niu P, Ma Y, Yan S (2018) A modified teaching–learning-based optimization algorithm for numerical function optimization. Int J Mach Learn Cybern. https://doi.org/10.1007/s13042-018-0815-8
Guo HY, Yuan HF, Huang Q (2019) Structural damage identification based on gray cloud rule generator algorithm. Adv Mech Eng 11:1–13. https://doi.org/10.1177/1687814018819904
Najafgholipour MA, Dehghan SM, Hadianfard MA (2019) The efficiency of a novel identification method for structural damage assessment using the first vibration mode data. J Sound Vib. https://doi.org/10.1016/j.jsv.2019.06.011
Katebi L, Tehranizadeh M, Mohammadgholibeyki N (2018) A generalized flexibility matrix-based model updating method for damage detection of plane truss and frame structures. J Civil Struct Health Monit 8:301–314. https://doi.org/10.1007/s13349-018-0276-5
Shih HW, Thambiratnam DP, Chan THTÃ (2009) Vibration based structural damage detection in flexural members using multi-criteria approach. J Sound Vib 323:645–661. https://doi.org/10.1016/j.jsv.2009.01.019
Fawcett T (2006) An introduction to ROC analysis. Pattern Recogn Lett 27:861–874. https://doi.org/10.1016/j.patrec.2005.10.010
Woon CE, Mitchell LD (1996) Temperature-induced variations in structural dynamic characteristics part II: analytical. In: Second international conference on vibration measurements by laser techniques: advances and applications. International society for optics and photonics, pp 58–70
Chatterjee A (2000) An introduction to the proper orthogonal decomposition. Curr Sci 78:808–817
Dyke S, Bernal D, Beck J, Ventura C (2003) Experimental phase II of the structural health monitoring benchmark problem. In: Proceedings of the 16th ASCE engineering mechanics conference, pp 1–7
Messina A, Williams EJ, Contursi T (1998) Structural damage detection by a sensitivity and statistical-based method. J Sound Vib 216:791–808. https://doi.org/10.1006/jsvi.1998.1728
Seyedpoor SM (2012) International journal of non-linear mechanics A two stage method for structural damage detection using a modal strain energy based index and particle swarm optimization. Int J Non Linear Mech 47:1–8. https://doi.org/10.1016/j.ijnonlinmec.2011.07.011
Kaveh A, Javadi SM, Maniat M (2014) Damage assessment via modal data with a mixed particle swarm strategy, ray optimizer, and harmony search. Asian J Civil Eng 15:95–106
Wei ZT, Liu JK, Lu ZR (2016) Damage identification in plates based on the ratio of modal strain energy change and sensitivity analysis. Inverse Probl Sci Eng 24:265–283
Nguyen-Thoi T, Tran-Viet A, Nguyen-Minh N et al (2018) A combination of damage locating vector method (DLV) and differential evolution algorithm (DE) for structural damage assessment. Front Struct Civil Eng 12:92–108. https://doi.org/10.1007/s11709-016-0379-1
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ahmadi-Nedushan, B., Fathnejat, H. A modified teaching–learning optimization algorithm for structural damage detection using a novel damage index based on modal flexibility and strain energy under environmental variations. Engineering with Computers 38, 847–874 (2022). https://doi.org/10.1007/s00366-020-01197-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00366-020-01197-3