Non-contact Robotic Measurement of Jet Engine Components with 3D Optical Scanner and UTT Method

1. Gierlak, P., Burghardt, A., Szybicki, D., Szuster, M., Muszyńska, M.: On-line manipulator tool condition monitoring based on vibration analysis. Mech. Syst. Signal Process. 89, 14–26 (2017)

   Article  Google Scholar 

2. Giergiel, J., Kurc, K.: Identification of the mathematical model of an inspection mobile robot with fuzzy logic systems and neural networks. J. Theor. Appl. Mech. 49, 209–225 (2011)

   Google Scholar 

3. Tutak, J.S.: Virtual reality and exercises for paretic upper limb of stroke survivors. Tehnički vjesnik 24 (Supplement 2), 451–458 (2017)

   Google Scholar 

4. Kurc, K., Szybicki, D., Burghardt, A., Muszyńska, M.: The application of virtual prototyping methods to determine the dynamic parameters of mobile robot. Open Eng. 6(1), 55–63 (2016)

   Article  Google Scholar 

5. Tutak, J.S.: Design of ELISE robot for the paretic upper limb of stroke survivors. J. Vibroengineering 18(6), 4069–4085 (2016)

   Article  Google Scholar 

6. Kohut, P., Kurc, K., Szybicki, D., Cioch, W., Burdzik, R.: 1823. Vision-based motion analysis and deflection measurement of a robot’s crawler unit. J. Vibroengineering 17(8), 4112–4121 (2015)

   Google Scholar 

7. Kohut, P., Holak, K., Dworakowski, Z., Mendrok, K.: Vision-based measurement systems for static and dynamic characteristics of overhead lines. J. Vibroengineering 18(4), 2113–2122 (2016)

   Article  Google Scholar 

8. Trojnacki, M., Dąbek, P.: Determination of motion parameters with inertial measurement units–Part 2: algorithm verification with a four-wheeled mobile robot and low-cost MEMS sensors. In: Mechatronics-Ideas for Industrial Application, pp. 253–267. Springer, Cham (2015)

   Google Scholar 

9. Kohut, P., Holak, K., Martowicz, A.: An uncertainty propagation in developed vision based measurement system aided by numerical and experimental tests. J. Theor. Appl. Mech. 50(4), 1049–1061 (2012)

   Google Scholar 

10. Burghardt, A., Szybicki, D., Kurc, K., Muszyńska, M., Mucha, J.: Experimental Study of Inconel 718 surface treatment by edge robotic Deburring with force control. Strength Mater. 49(4), 594–604 (2017)

    Article  Google Scholar 

11. Sieniawski, J.: Nickel and titanium alloys in aircraft turbine engines. Adv. Manuf. Sci. Technol. 27(3), 23–33 (2003)

    Google Scholar 

12. Carl, V., Becker, E., Sperling, A.: Thermography inspection system for gas turbine blades. In: 7th European Conference on non-destructive testing, pp. 2658–2665. Copenhagen (1998)

    Google Scholar 

13. Kilian, D.: 3D tomography of turbine blades. In: Proceedings of the International Symposium of Computerized Tomography for Industrial Applications, vol. 31, pp. 1–17. Berlin (1999)

    Google Scholar 

14. Le Bihan, Y., Joubert, P.Y., Placko, D.: Wall thickness evaluation of single-crystal hollow blades by eddy current sensor. NDT E Int. 34(5), 363–368 (2001)

    Article  Google Scholar 

15. Lane, C.: The development of a 2D ultrasonic array inspection for single crystal turbine blades. Springer Theses. pp. 63–79. Springer International Publishing, Switzerland (2014)

    Google Scholar 

16. Krause, M., et al.: Comparison of pulse-echo methods for testing concrete. NDT E Int. 30(4), 195–204 (1997)

    Article  Google Scholar 

17. Chakroun, N., Fink, M.A., Wu, F.: Time reversal processing in ultrasonic nondestructive testing. IEEE Trans. Ultrasonics Ferroelectrics Freq. Control 42(6), 1087–1098 (1995)

    Article  Google Scholar 

18. Schindel, D.W., Hutchins, D.A., Grandia, W.A.: Capacitive and piezoelectric air-coupled transducers for resonant ultrasonic inspection. Ultrasonics 34(6), 621–627 (1996)

    Article  Google Scholar 

19. Garnier, C., Pastor, M.L., Eyma, F., Lorrain, B.: The detection of aeronautical defects in situ on composite structures using non destructive testing. Compos. Struct. 93(5), 1328–1336 (2011)

    Article  Google Scholar 

20. D’orazio, T., Leo, M., Distante, A., Guaragnella, C., Pianese, V., Cavaccini, G.: Automatic ultrasonic inspection for internal defect detection in composite materials. NDT e Int. 41(2), 145–154 (2008)

    Article  Google Scholar 

21. Tanase, L., Margaritescu, M.: Quality control of product/process using nondestructive control and possibilities of robotic investigation. In: SIOEL’99: Sixth Symposium on Optoelectronics, vol. 4068, pp. 364–375. International Society for Optics and Photonics (2000, February)

    Google Scholar 

22. Yao, Y., Liu, S., Zhang, W.: Regeneration of silica gel using high-intensity ultrasonic under low temperatures. Energy Fuels 23(1), 457–463 (2008)

    Article  Google Scholar 

23. Steiner, K.V.: Defect classifications in composites using ultrasonic nondestructive evaluation techniques. In: Damage Detection in Composite Materials. ASTM International (1992)

    Google Scholar 

24. Kersting, T., Schönartz, N., Oesterlein, L., Liessem, A.: High end inspection by filmless radiography on LSAW large diameter pipes. NDT E Int. 43(3), 206–209 (2010)

    Article  Google Scholar 

25. Mineo, C., Pierce, S.G., Nicholson, P.I., Cooper, I.: Robotic path planning for non-destructive testing–A custom MATLAB toolbox approach. Robot. Comput. Integr. Manuf. 37, 1–12 (2016)

    Article  Google Scholar 

26. Burghardt, A., Kurc, K., Szybicki, D., Muszyńska, M., Szczęch, T.: Robot-operated inspection of aircraft engine turbine rotor guide vane segment geometry. Tehnicki Vjesnik-Technical Gazette 24(Supplement 2), 345–348 (2017)

    Google Scholar 

27. Liu, B., et al.: Virtual plate pre-bending for the long bone fracture based on axis pre-alignment. Comput. Med. Imaging Gr. 38(4), 233–244 (2014)

    Article  Google Scholar 

28. Lavoué, G., Tola, M., Dupont, F., Lavou, G.: MEPP-3D mesh processing platform. In: GRAPP/IVAPP, 206–210 (2012)

    Google Scholar 

29. Brajlih, T., et al.: Possibilities of using three-dimensional optical scanning in complex geometrical inspection. Strojniški vestnik-Journal of Mechanical Engineering 57(11), 826–833 (2011)

    Article  Google Scholar 

30. GOM. Quality control of injection moulded parts, from http://www.gom.com/EN/B0C.html. Accessed 31 May 2009

31. Dúbravčík, M., Kender, Š.: Application of reverse engineering techniques in mechanics system services. Proced. Eng. 48, 96–104 (2012)

    Article  Google Scholar 

32. Paulic, M., Irgolic, T., Balic, J., Cus, F., Cupar, A., Brajlih, T., Drstvensek, I.: Reverse engineering of parts with optical scanning and additive manufacturing. Proced. Eng. 69, 795–803 (2014)

    Article  Google Scholar 

33. Pogacar, V.: Integrated renaissance of design. In: Proceedings of the 1st DAAAM International specialized conference on additive technologies, pp. 9–12. Celje (2007)

    Google Scholar 

34. Min, Z.H.O.U.: A new approach of composite surface reconstruction based on reverse engineering. Proced. Eng. 23, 594–599 (2011)

    Article  Google Scholar 

35. Burghardt, A., Kurc, K., Szybicki, D., Muszyńska, M., Szczęch, T.: Monitoring the parameters of the robot-operated quality control process. Adv. Sci. Technol. Res. J. 11(1), 232–236 (2017)

    Article  Google Scholar 

36. Burghardt, A., Kurc, K., Szybicki, D., Muszyńska, M., Nawrocki, J.: Robot-operated quality control station based on the UTT method. Open Eng. 7(1), 37–42 (2017)

    Article  Google Scholar 

37. Burghardt, A., Kurc, K., Szybicki, D., Muszyńska, M., Nawrocki, J.: Software for the robot-operated inspection station for engine guide vanes taking into consideration the geometric variability of parts. Tehnicki Vjesnik-Technical Gazette 24(Supplement 2), 349–353 (2017)

    Google Scholar 

Download references