Fundamentals of Polymeric Composite Materials

• Agarwal, B.G., Broutman, L.J. 1990. Analysis and Performance of Fiber Composites, 2nd edn., John Wiley & Sons, New York.

  Google Scholar 

• Ahmed, S., Jones, F.R. 1990. A review of particulate reinforcement theories for polymer composites, J. Mat. Sci. 25, 4933–4942.

  Article  Google Scholar 

• Bader, M.G., Lekakou, C. 1997. Processing for laminate structures, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 371–479, Marcel Dekker Inc., New York.

  Google Scholar 

• Barbero, E.J. 1998. Introduction to Composite Materials Design, Taylor and Francis Inc., Philadelphia, PA.

  Google Scholar 

• Béland, S. 1990. High Performance Thermoplastic Resins and Their Composites, Noyes Data Corporation, Park Ridge, NJ.

  Google Scholar 

• Berglund, L.A., 1998. Thermoplastic resins, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 115–130, Chapman & Hall, London.

  Google Scholar 

• Birchall, J.D., Brandbury, J.A.A., Dinwoodie, J. 1985. Alumina fibers: Preparation, properties and applications, in: Strong Fibres (W. Watt, B.V. Perov, eds.), pp. 115–154, Elsevier, Amsterdam.

  Google Scholar 

• Broutman, L.J. 1969. Measurement of the fiber-polymer matrix interfacial strength, in: Interfaces in Composites, ASTM STP 452, pp. 27–41, American Society for Testing and Materials.

  Google Scholar 

• Carlsson, L.A., Pipes, R.B. 1997. Experimental characterization of advanced composite materials, 2nd edn., Technomic Publishing Co., Lancaster, PA.

  Google Scholar 

• Cassis, F.A., Talbot, R.C. 1998. Polyester and inyl ester resins, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 34–47, Chapman & Hall, London.

  Google Scholar 

• Castro, J.M., Griffith, R.M. 1997. Press molding processes, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 481–513, Marcel Dekker Inc., New York.

  Google Scholar 

• Chamis, C.C. 1969. Failure criteria for filamentary composites, in Composite Materials: Testing and Design, pp. 336–351, ASTM STP 460, American Society for Testing and Materials.

  Google Scholar 

• Chamis, C.C., Sendeckyj, G.P. 1968. Critique on theories predicting thermoelastic properties of fibrous composites, J. Compos. Mater. 2, 332–358.

  Google Scholar 

• Clements, L.L. 1998. Organic fibers, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 202–241, Chapman & Hall, London.

  Google Scholar 

• Cox, H.L. 1952. The elasticity and strength of paper and other fibrous materials, Br. J. Appl. Phys. 3, 72–79.

  Article  Google Scholar 

• Dillon, G., Mallon, P., Monaghan, M. 1997. The autoclave processing of composites, in: Advanced Composite Manufacturing (T.G. Gutowski, ed.), pp. 207–258, John Wiley & Sons, New York.

  Google Scholar 

• Dobb, M.G. 1985. The production, properties and structure of high-performance poly(p-phenylene terephthalamide) fibres, in: Strong Fibres (W. Watt, B.V. Perov, eds.), pp. 673–704, Elsevier, Amsterdam.

  Google Scholar 

• Dockum, J.F. Jr. 1987. Fiberglass, in: Handbook of Reinforcements for Plastics (J.V. Milewski. H.S. Katz, eds.), pp. 233–286, Van Nostrand Reinhold Company, New York.

  Google Scholar 

• Donnet, J.B., Bansal, R.C. 1990. Carbon Fibers, 2nd edn., Elsevier/Marcel Dekker Inc., New York.

  Google Scholar 

• Fanucci, J.P., Nolet, S., McCarthy, S. 1997. Pultrusion of composites, in: Advanced Composite Manufacturing (T.G. Gutowski, ed.), pp. 259–295, John Wiley & Sons, New York.

  Google Scholar 

• Fong, L., Advani, S.G. 1998. Resin transfer molding, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 433–455, Chapman & Hall, London.

  Google Scholar 

• Fraser, A.A., Ancker, F.H., DiBenedetto, A.T. 1975. A computer modelled single filament technique for measuring coupling and sizing agent effects in fibre reinforced composites, in: Proceedings of the 30th Annual Tech. Conf. on Reinforced Plastics, paper 22-A pp. 1–13, The Society of the Plastics Industry Inc., Washington D.C.

  Google Scholar 

• Gibbs, H.H. 1998. High temperature resins, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 75–98, Chapman & Hall, London.

  Google Scholar 

• Gibson, R.F. 1994. Principles of Composite Material Mechanics, McGraw-Hill Inc., New York.

  Google Scholar 

• Gutowski, T.G. 1997. A brief introduction to composite materials and manufacturing processes, in: Advanced Composite Manufacturing (T.G. Gutowski, ed.), pp. 5–41, John Wiley & Sons, New York.

  Google Scholar 

• Halpin, J.C., Kardos, J.L. 1976. The Halpin-Tsai equations: a review, Polym. Eng. Sci. 16, 344–352.

  Google Scholar 

• Halpin, J.C., Tsai,.W. 1969. ffects of environmental factors on composite materials, AFML-TR-63-423.

  Google Scholar 

• Haque, E., Leach B.L. 1998. Matched metal compression molding of polymer composites, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 378–396, Chapman & Hall, London.

  Google Scholar 

• Hashin, Z. 1980. Failure criteria for unidirectional fiber composites, J. Appl. Mech. 47, 329–334.

  Google Scholar 

• Herakovich, C.T. 1998. Mechanics of Fibrous Composites, John Wiley & Sons, New York.

  Google Scholar 

• Herrera-Franco, P.J., Drzal, L.T. 1992. Comparison of methods for the measurements of fibre/matrix adhesion in composites, Composites 23, 2–27.

  Article  Google Scholar 

• Hill, R. 1965. Theory of mechanical properties of fibre-strengthened materials: III. Self-consistent model, J. Mech. Phys. Solids 13, 189.

  Google Scholar 

• Hughes, J.D.H. 1991. The carbon fiber-epoxy interfaces-a review, Compos. Sci. Technol. 41, 13–45.

  Article  Google Scholar 

• Jaffe, M. 1987. High modulus polymers, in: Encyclopedia of Polymer Science and Engineering, Vol. 7, pp. 699–722, Wile y-Interscience, New York.

  Google Scholar 

• Juska, T.D., Puckett, P.M. 1997. Matrix resins and fiber/matrix adhesion, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 101–165, Marcel Dekker Inc., New York.

  Google Scholar 

• Kelly, A., Tyson, W.R. 1965. Tensile properties of fiber-reinforced metals: copper/tungsten and copper/molybdenum, J. Mech. Phys. Solids 13, 329–350.

  Google Scholar 

• Kim, J.K., Mai, Y.W. 1998. Engineered Interfaces in Fiber Reinforced Composites, Elsevier Science Ltd., Amsterdam.

  Google Scholar 

• Kumar, S., Wang, Y. 1997. Fibers, fabric, and fillers, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 51–100, Marcel Dekker Inc., New York.

  Google Scholar 

• Lafdi, K., Wright, M.A. 1998. Carbon fibers, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 169–201, Chapman & Hall, London.

  Google Scholar 

• Launikitis, M.B. 1982. Vinyl ester resins, in: Handbook of Composites (G. Lubin, ed.), pp. 38–49, Van Nostrand Reinhold Company Inc., New York.

  Google Scholar 

• Loevenstein, K.L. 1983. The Manufacturing Technology of Continuous Glass Fibers, 2nd edn., Elsevier, New York.

  Google Scholar 

• Mahdukar, M.S., Drzal, L.T. 1991a. Fiber-matrix adhesion and its effect on composite mechanical properties: I. Inplane and interlaminar shear behavior of graphite/epoxy composites, J Compos. Mater. 25, 932–957.

  Google Scholar 

• Mahdukar, M.S., Drzal, L.T. 1991b. Fiber-matrix adhesion and its effect on composite mechanical properties: II. Longitudinal (0°)transverse (90°)tensile and flexure behavior of graphite/epoxy composites, J. Compos. Mater. 25, 958–991.

  Google Scholar 

• Mahdukar, M.S., Drzal, L.T. 1992a. Fiber-matrix adhesion and its effect on composite mechanical properties: III. Longitudinal (0°)compressive properties of graphite/epoxy composites, J. Compos. Mater. 26, 310–333.

  Google Scholar 

• Mahdukar, M.S., Drzal, L.T. 1992b. Fiber-matrix adhesion and its effect on composite mechanical properties: IV. Mode I and mode II fracture toughness of graphite/epoxy composites, J. Compos. Mater. 26, 936–969.

  Google Scholar 

• Mallick, P.K. 1993. Fiber Reinforced Composites, Marcel Dekker Inc., New York.

  Google Scholar 

• Mandell, J.F., Chen, J.H., McGarry, F.J. 1980. A microdebonding test for in situ fiber/matrix bond strength in composite materials, Int. J. Adhes. Adhesiv. 1, 40–44.

  Google Scholar 

• Miller, B., Muri, P., Rebenfeld, L. 1987. A microbond method for determination of the shear strength of a fiber/resin interface, Compos. Sci. Technol. 28, 17–32.

  Article  Google Scholar 

• Muzzy, J.D., Colton, J.S. 1998. The processing science of thermoplastic composites, in: Advanced Composite Manufacturing (T.G. Gutowski, ed.), pp. 81–114, John Wiley & Sons, New York.

  Google Scholar 

• Nicolais, L., Narkis, M. 1971. Stress-strain behavior of styrene-acrylonitrile/glass bead composites in the glassy region, Polym. Eng. Sci. 11, 194–199.

  Article  Google Scholar 

• Nielsen, L.E. 1967. Mechanical properties of particulate-filled systems, J. Compos. Mater. 1, 100–119.

  Google Scholar 

• Okine, R.K. 1997. Processing of thermoplastic matrix composites, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 579–629, Marcel Dekker Inc., New York.

  Google Scholar 

• Peebles, L.H. 1995. Carbon Fibers: Formation, Structure, and Properties, CRC Press, Boca Raton.

  Google Scholar 

• Penn, L.S., Chiao, T.T. 1982. Epoxy resins, in: Handbook of Composites (G. Lubin, ed.), pp. 57–88, Van Nostrand Reinhold Company Inc., New York.

  Google Scholar 

• Penn, L.S., Wang, H. 1998. Epoxy resins, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 48–74, Chapman & Hall, London.

  Google Scholar 

• Peters, S.T., Tarnopol’skii, M. 1997. Filament winding, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 515–548, Marcel Dekker Inc., New York.

  Google Scholar 

• Plueddemann, E.P. 1991. Silane Coupling Agents, 2nd edn., Plenum Press, New York.

  Google Scholar 

• Richardson, T. 1987. Composites: A Design Guide, Industrial Press Inc., New York.

  Google Scholar 

• Shimp, D.A. 1998. Speciality matrix resins, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 99–114, Chapman &Hall, London.

  Google Scholar 

• Sidwell, D.R. 1998. Hand lay-up and bag molding, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 352–377, Chapman &Hall, London.

  Google Scholar 

• Sumerak, J.E. 1997. The poltrusion process for continuous automated manufacture of engineered composite profiles, in: Composites Engineering Handbook (P.K. Mallick, ed.), pp. 549–577, Marcel Dekker Inc., New York.

  Google Scholar 

• Suplinskas, R.J., Marzik, J.V. 1987. Boron and silicon carbide filaments, in: Handbook of Reinforcements for Plastics (J.V. Milewski, H.S. Katz, eds.), pp. 340–363, Van Nostrand Reinhold Company, New York.

  Google Scholar 

• Tarnopol’ skii, Y.M., Peters, S.T., Beil’, A.I. 1998. Filament winding,in:Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 456–475, Chapman &Hall, London.

  Google Scholar 

• Throne, J.L. 1998. Processing thermoplastic composites, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 525–555, Chapman &Hall, London.

  Google Scholar 

• Tsai, S.W., Pagano, N.J. 1968. Invariant properties of composite materials, in Composite Materials Workshop (S.W. Tsai, J.C. Halpin, N.J. Pagano, eds.), pp. 233–252, Technomic Publishing Co. Lancaster, PA.

  Google Scholar 

• Tsirlin, J. 1985. Boron filaments, in: Strong Fibres (W. Watt, B.V. Perov, eds.), pp. 155–199, Elsevier, Amsterdam.

  Google Scholar 

• Updegraff, I.H. 1982. Unsatured polyester resins, in: Handbook of Composites (G. Lubin, ed.), pp. 17–37, Van Nostrand Reinhold Company Inc., New York.

  Google Scholar 

• Vaughan, D.J. 1998. Fiberglass reinforcement, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 131–155, Chapman &Hall, London.

  Google Scholar 

• Wilson, B.A. 1998. Pultrusion, in: Handbook of Composites, 2nd edn. (S.T. Peters, ed.), pp. 488–524, Chapman &Hall, London.

  Google Scholar 

• Yajima, S. 1985. Silicon carbide fibres, in: Strong Fibres (W. Watt, B.V. Perov, eds.), pp. 201–237, Elsevier, Amsterdam.

  Google Scholar 

Download references