International Journal of Automation Technology, Volume 14

Volume 14, Number 1, January 2020

Special Issue on the Latest Research in Precision Engineering

• 
  Yasuhiro Kakinuma, Takashi Matsumura, Keiichi Nakamoto:
  Editorial: the Latest Research in Precision Engineering. 5
• 
  Atsuko Enomoto, Noriaki Yamamoto, Yoshio Yamamura, Yoshio Sugawara:
  Process Knowledge Integrated Assembly Sequence Planning for Control Panel. 6-17
• 
  Haruhiko Suwa, Soushi Sakamoto, Masafumi Nagata, Kazuhiro Tezuka, Tetsuo Samukawa:
  Applicability of Diamond-Coated Tools for Ball End Milling of Sintered Tungsten Carbide. 18-25
• 
  Takumi Imada, Keiji Ogawa, Haruki Kino, Heisaburo Nakagawa, Hitomi Kojima:
  Experimental Investigations on Cutting Phenomena in Shoulder Cutting of Hardened Die Steel with Small Diameter End Mill: Effects of Left Hand Helical Tool. 26-37
• 
  Isamu Nishida, Keiichi Shirase:
  Proposal of Contour Line Model for High-Speed End Milling Simulation. 38-45
• 
  Hirohisa Narita:
  Cutting Features Between Surface Roughness in Feed Direction and Machining State of Radius End Mill Against Inclined Surfaces (In Case of Contour Machining and Five-Axis Machining with Constant Tilt Angle). 46-51
• 
  Tatsuya Kume, Masanori Satoh, Tsuyoshi Suwada, Kazuro Furukawa, Eiki Okuyama:
  Angle Detection Using Gyro Signals Rotating Around Four Orthogonally Aligned Axes. 52-58
• 
  Masakazu Fujimoto, Yuka Hiraizumi, Kazutaka Hirata, Susumu Ohishi:
  Grinding Energy Distributions and Wear Behaviors of Grain Cutting Edges in cBN Deep Grinding. 59-65
• 
  Meng Xu, Keiichi Nakamoto, Yoshimi Takeuchi:
  Compensation Method for Tool Setting Errors Based on Non-Contact On-Machine Measurement. 66-72
• 
  Hiroshi Sawano:
  Relationship Between Fluid Properties and Bearing Stiffness in Water Hydrostatic Bearing. 73-79
• 
  Makoto Kato, Yasuhiro Kakinuma, Yuki Shirakawa, Kazunori Iijima, Yasusuke Iwashita:
  Positioning Performance Evaluation for Light-Weight Rotary Stage CFRP Application. 80-90
• 
  So Ito, Yusuke Shima, Daichi Kato, Kimihisa Matsumoto, Kazuhide Kamiya:
  Development of a Microprobing System for Side Wall Detection Based on Local Surface Interaction Force Detection. 91-98
• 
  Takuya Osawa, Makoto Matsuo, Yuya Eyama, Hiroshi Yamamoto, Shinji Tanaka, Masao Kikuchi, Yuki Hirata, Hiroki Akasaka, Naoto Ohtake:
  Using Textured-DLC Coating to Improve the Wear Resistance of Stainless Steel Plate Under Dust-Containing Lubricant Condition. 99-108
• 
  Tomoki Konishi, Yuki Jingu, Tatsuya Yoshizawa, Masaru Irita, Toshihiro Suzuki, Masanori Hayase:
  Mitigation of Channel Clogging in a Microfluidic Device for Capturing Circulating Tumor Cells. 109-116
• 
  Shunki Yamamoto, Seiji Aoyagi, Masahiro Yamada, Tomokazu Takahashi, Masato Suzuki, Toshio Nagashima, Atsushi Kunugi, Makoto Chiyonobu, Takeshi Kuroiwa, Ryota Hosomi, Kenji Fukunaga, Daisuke Uta, Tomonori Takazawa, Tomoyuki Hikitsuchi, Yumi Kawajiri, Koji Nakayama:
  A Puncturing Device that Mimics the Mechanism of Mosquito's Proboscis and Labium - Verification of the Effect of Skin Deformation / Needle Buckling Prevention Mechanism and Puncture Experiment on Artificial Skin and Experimental Animals -. 117-127

Regular Papers

• 
  Fumiaki Osawa:
  Utilization of Reluctance Electromagnetic Force of Inner-Mover-Type Rotary-Linear Motor. 129-134

Volume 14, Number 2, March 2020

Special Issue on Novel Fabrication Processes for Tailored Functional Materials and Surfaces

• 
  Masahiko Yoshino, Nobuyuki Moronuki:
  Editorial: Novel Fabrication Processes for Tailored Functional Materials and Surfaces. 147
• 
  Sarah F. Jurak, Emil F. Jurak, Md. Nizam Uddin, Ramazan Asmatulu:
  Functional Superhydrophobic Coating Systems for Possible Corrosion Mitigation. 148-158
• 
  Tatsuhiko Aizawa, Tadahiko Inohara, Kenji Wasa:
  Fabrication of Superhydrophobic Stainless Steel Nozzles by Femtosecond Laser Micro-/Nano-Texturing. 159-166
• 
  Kodai Kawaguchi, Yuto Fujita, Kenta Kato, Arata Kaneko:
  Fabrication of Poly-Pyrrole Membrane Actuator for Cell Stimulation. 167-174
• 
  Chenyao Cao, Jiang Zhu, Tomohisa Tanaka, Dinh Ngoc Pham:
  Investigation of Corrosion Resistance Enhancement for Biodegradable Magnesium Alloy by Ball Burnishing Process. 175-183
• 
  Daiki Funakawa, Nobuyuki Moronuki:
  Fabrication of SiO₂-ZnO Core-Shell Urchin-Like Structure by Hydrothermal Method Using Self-Assembled Particles as Nuclei and Application to UV-Activated Gas Sensors. 184-189
• 
  Motoyuki Murashima, Yusuke Imaizumi, Noritsugu Umehara, Takayuki Tokoroyama:
  New Droplet Removal Polishing Method for Diamond-Like Carbon with Carbon Fiber Brush. 190-199
• 
  Tatsuhiko Aizawa, Yasuo Saito, Hideharu Hasegawa, Kenji Wasa:
  Fabrication of Optimally Micro-Textured Copper Substrates by Plasma Printing for Plastic Mold Packaging. 200-207
• 
  Motoyuki Murashima, Takaharu Murooka, Noritsugu Umehara, Takayuki Tokoroyama:
  Development of Surface Roughness Generation Model for CFRTP Manufactured by LFT-D. 208-216
• 
  Jonny Herwan, Seisuke Kano, Oleg Ryabov, Hiroyuki Sawada, Nagayoshi Kasashima, Takashi Misaka:
  Predicting Surface Roughness of Dry Cut Grey Cast Iron Based on Cutting Parameters and Vibration Signals from Different Sensor Positions in CNC Turning. 217-228
• 
  Potejana Potejanasak, Truong Duc Phuc, Motoki Terano, Takatoki Yamamoto, Masahiko Yoshino:
  Chemical Lift-Off Process Using Acetone Ink for Easy Fabrication of Metallic Nano/Microstructures. 229-237
• 
  Keita Shimada, Ziqi Chen, Masayoshi Mizutani, Tsunemoto Kuriyagawa:
  Ultrasonic-Assisted Face Milling for Fabricating Hierarchical Microstructures. 238-244
• 
  Toshitaka Terabayashi, Jiwang Yan:
  Surface Formation Behaviors in Wavy Microgroove Cutting on Various Workpiece Materials. 245-252
• 
  Abdallah Abdelkawy, Masahiko Yoshino, Yuki Nakagawa:
  Effect of Tool Rake Angle and Crystal Orientation on Ductile Mode Cutting of Hard/Brittle Materials. 253-259

Special Issue on Advanced Material Driven Design of Machine Tools

• 
  Konrad Wegener, Atsushi Matsubara:
  Editorial: Advanced Material Driven Design of Machine Tools. 261-263
• 
  Wei Wu, Kenichi Urabe, Toshiki Hirogaki, Eiichi Aoyama, Hiroyoshi Sota:
  Investigation of Production of Nanofiber Nonwoven Fabric and its Thermal Properties. 264-273
• 
  Isao Oshita, Atsushi Matsubara, Tsuneto Sumida:
  Evaluation of Dynamic Characteristics of a Hybrid Guideway System. 274-279
• 
  Tetsuya Kawabata, Toshiki Hirogaki, Eiichi Aoyama, Hiromichi Nobe:
  Driving Performance of Natural Fiber Gears Made Only from Bamboo Fibers Extracted with a Machining Center. 280-293
• 
  Ryo Kondo, Daisuke Kono, Atsushi Matsubara:
  Evaluation of Machine Tool Spindle Using Carbon Fiber Composite. 294-303
• 
  Ryota Shindo, Shinji Nishiwaki:
  Latest Machine Tool Structural Design Technology for Ultra-Precision Machining. 304-310
• 
  Eduard Relea, Varun Urundolil Kumaran, Alberto Sanchez Cebrian, Christian Gschnitzer-Bärnthaler, Markus Zogg, Lukás Weiss, Konrad Wegener:
  Utilization of CFRP in High-Speed Stamping Presses and its Gigacycle Fatigue Testing at Resonance Frequency. 311-325
• 
  Andreas Häusler, Kim Torben Werkle, Walther Maier, Hans-Christian Möhring:
  Design of Lightweight Cutting Tools. 326-335

Regular Papers

• 
  Pu Yang, Zhangxi Liu, Yuxia Wang, Dejie Li:
  Adaptive Sliding Mode Fault-Tolerant Control for Uncertain Systems with Time Delay. 337-345

Volume 14, Number 3, May 2020

Special Issue on Machine Accuracy Evaluation

• 
  Soichi Ibaraki, Andreas Archenti:
  Editorial: Machine Accuracy Evaluation. 359
• 
  Benjamin Montavon, Philipp Dahlem, Martin Peterek, Robert H. Schmitt:
  A Digital Perspective on Machine Tool Calibration. 360-368
• 
  Kanglin Xing, J. R. R. Mayer, Sofiane Achiche:
  Impact of Model Complexity in the Monitoring of Machine Tools Condition Using Volumetric Errors. 369-379
• 
  Soichi Ibaraki, Rin Okumura:
  Machining Tests to Evaluate Machine Tool Thermal Displacement in Z-Direction: Proposal to ISO 10791-10. 380-385
• 
  Bernd W. Peukert, Andreas Archenti:
  Dynamic Interaction Between Precision Machine Tools and Their Foundations. 386-398
• 
  Takaaki Kenno, Ryuta Sato, Keiichi Shirase, Shigemasa Natsume, Henny Spaan:
  Identification Method of Error Motions and Geometric Errors of a Rotary Axis by R-Test. 399-408
• 
  Guido Florussen, Koen Houben, Henny Spaan, Theresa Spaan-Burke:
  Automating Accuracy Evaluation of 5-Axis Machine Tools. 409-416
• 
  Jonathan Miller, Simon Fletcher, Andrew Longstaff, Simon Parkinson:
  Simultaneous Constant Velocity Measurement of the Motion Errors of Linear Axes. 417-428
• 
  Keisuke Nagao, Nobuaki Fujiki, Yoshitaka Morimoto, Akio Hayashi:
  Calibration Method of Parallel Mechanism Type Machine Tools. 429-437

Regular Papers

• 
  Ahmed Tawfik, Paul Bills, Liam Blunt, Radu Racasan:
  Development of an Additive Manufactured Artifact to Characterize Unfused Powder Using Computed Tomography. 439-446
• 
  Masao Sugi, Yusuke Shiomi, Tsuyoshi Okubo, Hidetoshi Nagai, Kazuyoshi Inoue, Jun Ota:
  Solution of the Rectangular Strip Packing Problem Considering a 3-Stage Guillotine Cutting Constraint with Finite Slitter Blades. 447-458
• 
  Isamu Nishida, Keiichi Shirase:
  Machining Time Reduction by Tool Path Modification to Eliminate Air Cutting Motion for End Milling Operation. 459-466
• 
  Shota Matsui, Nobutoshi Ozaki, Toshiki Hirogaki, Eiichi Aoyama, Takamasa Yamamoto:
  Investigation of Internal Thread Cutting Phenomena in Three Axes by Controlling Helical Interpolate Motion Considering Tool Position Information from Servo-Drive. 467-474
• 
  Martin Mares, Otakar Horejs, Jan Hornych:
  Thermal Error Minimization of a Turning-Milling Center with Respect to its Multi-Functionality. 475-483
• 
  Marko Katic, Nenad Ferdelji, Danijel Sestan:
  Investigation of Temperature-Induced Errors in XCT Metrology. 484-490
• 
  Yuki Saito, Jun'ichi Kaneko, Takeyuki Abe, Kenichiro Horio:
  Development of Scanning Line Tool Path Generation Algorithm Using Boundary Position Information of Approximate Polyhedron of Complex Molds. 491-499
• 
  Muizuddin Azka, Keiji Yamada, Mahfudz Al Huda, Kyosuke Mani, Ryutaro Tanaka, Katsuhiko Sekiya:
  Hilbert-Huang Transform Analysis of Machining Stability in Ball-Nose End-Milling of Curved Surface. 500-511
• 
  Mayumi Kaneko, Takahiro Kaminaga, Jun'ichi Kaneko, Kiyohiko Katano, Takeyuki Abe, Kenichiro Horio:
  Development of Tool Shape Estimation Method Integrating Multidirectional Optical Measurement. 512-520

Volume 14, Number 4, July 2020

Special Issue on Laser-Based/Assisted Manufacturing

• 
  Tsunemoto Kuriyagawa, Masayoshi Mizutani:
  Editorial: Laser-Based/Assisted Manufacturing. 533
• 
  Takeji Arai:
  Processing with Application of High-Power Semiconductor Laser - Theoretical Analysis of Heat Source and Application to Surface Processing -. 534-545
• 
  Hiraku Matsukuma, Masanori Matsunaga, Kai Zhang, Yuki Shimizu, Wei Gao:
  Fabrication of a Two-Dimensional Diffraction Grating with Isolated Photoresist Pattern Structures. 546-551
• 
  Shuhei Kodama, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa:
  Effects of Pulse Duration and Heat on Laser-Induced Periodic Surface Structures. 552-559
• 
  Gianluca Melis, Paolo Sirianni, Andrea Porceddu, Massimiliano Messere, Michele Perlo, Luca Orbech, Stefano Mauro, Matteo Gaidano, Leonardo Sabatino Scimmi, Matteo Melchiorre, Francesco Perrucci, Luciano Scaltrito:
  A Novel Platform for Smart 3D Manufacturing System. 560-567
• 
  Qingrui Gong, Pei Qiu, Shaolin Xu:
  Evolution of Chip-Deformation Mechanisms with Increasing Temperature in Laser-Assisted Microcutting of Amorphous Alloy. 568-574
• 
  Atsushi Ezura, Kazutoshi Katahira, Jun Komotori:
  Generation of Biocompatible Titanium Alloy Surfaces Including Calcium and Phosphorus Elements by Laser-Induced Mist Spraying Wet Treatment. 575-581
• 
  Shinji Ishibashi, Keita Shimada, Hiroyasu Kanetaka, Masaki Tsukuda, Takumi Mizoi, Masataka Chuzenji, Shoichi Kikuchi, Masayoshi Mizutani, Tsunemoto Kuriyagawa:
  Porosity and Tensile Properties of Rhizoid Porous Structure Fabricated Using Selective Laser Melting. 582-591
• 
  Yuki Manabe, Hiromichi Nishida, Toshiki Hirogaki, Eiichi Aoyama:
  Influence of Grooved Plate Cross-Sectional Shape on Bending Phenomena in Laser-Quenching Forming Process. 592-600
• 
  Ryohei Takase, Shuhei Kodama, Keita Shimada, Holger Mescheder, Kai Winands, Jan Riepe, Kristian Arntz, Masayoshi Mizutani, Tsunemoto Kuriyagawa:
  Study on the Creation of Fine Periodic Structure on V-Shaped Groove with Short-Pulsed Laser. 601-613

Regular Papers

• 
  Kazuhiro Funato, Yuichiro Kenmotsu, Ryosuke Tasaki, Toshio Sakakibara, Kiyoaki Kakihara, Kazuhiko Terashima:
  Experimental Analysis and Anti-Sway Control of Jigiri Behavior in a Nursing Lift. 615-624
• 
  Tohru Sasaki, Yudai Fujiwara, Kaoru Tachikawa, Kenji Terabayashi, Kuniaki Dohda:
  Hydraulic Micro Device with Force Sensing for Measurement of Mechanical Characteristics. 625-632
• 
  Kenichiro Yoshitomi, Atsunobu Une:
  Study of the Warp Removal Process for a Thin Substrate: Development of a Correction Processing System Using a Freezing Pin Chuck. 633-643
• 
  Andreas Gebhardt, Matthias Beier, Erik Schmidt, Thomas Rendel, Ute Gawronski, Eyk Gebhardt:
  Effective Optical System Assembly Using Ultra-Precise Manufactured References. 644-653
• 
  Kodai Nagayama, Jiwang Yan:
  Measurement and Compensation of Tool Contour Error Using White Light Interferometry for Ultra-Precision Diamond Turning of Freeform Surfaces. 654-664

Volume 14, Number 5, September 2020

Special Issue on Value Creation in Production

• 
  Toshiya Kaihara, Nariaki Nishino:
  Editorial: Value Creation in Production. 677
• 
  Yusuke Tsutsui, Nao Yamada, Yuya Mitake, Mar'atus Sholihah, Yoshiki Shimomura:
  A Strategic Design Guideline for Open Business Models. 678-689
• 
  Koji Kimita, Keiichi Muramatsu, Yutaro Nemoto:
  Ontological Descriptions for Integrating Design Information of Product-Service Systems. 690-699
• 
  Taira Okita, Tomoya Kawabata, Hideaki Murayama, Nariaki Nishino, Masaatsu Aichi:
  Digital Twin of Artifact Systems: Models Assimilated with Monitoring Data from Material Microstructures to Social Systems. 700-712
• 
  Tatsushi Nishi, Michiko Matsuda, Mao Hasegawa, Roghayyeh Alizadeh, Ziang Liu, Takuto Terunuma:
  Automatic Construction of Virtual Supply Chain as Multi-Agent System Using Enterprise E-Catalogues. 713-722
• 
  Tomoaki Yatsuka, Aya Ishigaki, Surendra M. Gupta, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue:
  Collaboration Strategy for a Decentralized Supply Chain Using Linear Physical Programming. 723-733
• 
  Takafumi Chida, Toshiya Kaihara, Nobutada Fujii, Daisuke Kokuryo, Yuma Shiho:
  Computational Study on Strategyproofness of Resource Matching in Crowdsourced Manufacturing. 734-743
• 
  Stanislaw Strzelczak, Rong Kang, Fernando Castaño:
  Development of Production Internet Framework for Value Creation. 744-756
• 
  Shota Suginouchi, Yuna Takahashi, Yosuke Kurihara, Hajime Mizuyama:
  Simultaneous Determination of Theatrical Casting and Ticket Distribution Using Scheduling Auction. 757-768
• 
  Fumiya Akasaka, Mika Yasuoka, Momoko Nakatani, Atsunobu Kimura, Masayuki Ihara:
  Patterns for Living Lab Practice: Describing Key Know-How to Promote Service Co-Creation with Users. 769-778
• 
  Ruriko Watanabe, Nobutada Fujii, Daisuke Kokuryo, Toshiya Kaihara, Yoichi Abe:
  Text Mining to Support Consulting Services for Client Company State Recognition. 779-790
• 
  Kenju Akai, Tetsuya Hirotomi, Aoi Mishima, Keiko Aoki, Tsunetaka Kijima, Toru Nabika:
  Continuous Efforts Leads to a Value for Hypertensive Patients: Development of a Casual Smart Na/K Meter and Smart Na/K Application Linked by NFC to Android. 791-799

Regular Papers

• 
  Tadahiro Nishiguchi:
  Transcriptional Characteristics of Quadrant Glitches on Machined Surface - Influence of Tool Diameter and Feed Rate -. 801-807
• 
  Koichi Morishige, Satoshi Mori:
  Tool Path Generation for 5-Axis Rough Cutting Using Haptic Device. 808-815
• 
  Masatomo Inui, Munekazu Kawano, Issei Watanabe, Nobuyuki Umezu:
  Improved Algorithm to Trace Boundary Curves on Two-Dimensional Square Meshes. 816-823
• 
  Masashi Kurose, Hiromasa Anahara, Takeshi Tane, Yoshihide Kuwabara, Kenta Aoshima, Tetsushi Kaburagi:
  Relationship Between Forced Vibration Method and Residual Stress in Die Materials. 824-834
• 
  Makoto Nikawa, Yu Iba, Minoru Yamashita:
  Solid Fraction Examination at Flow Cessation and Flow Cessation Mechanism of Al-Si-Mg Alloy. 835-842

Volume 14, Number 6, November 2020

The Best Paper Award 2020

• 
  Editorial Office:
  Editorial: Congratulations! The Best Paper Award 2020. 853-854

Special Issue on Design and Manufacturing for Environmental Sustainability

• 
  Yasushi Umeda:
  Editorial: Design and Manufacturing for Environmental Sustainability. 855-856
• 
  Yasushi Umeda, Kazunori Kitagawa, Yayoi Hirose, Keiko Akaho, Yuko Sakai, Makoto Ohta:
  Potential Impacts of the European Union's Circular Economy Policy on Japanese Manufacturers. 857-866
• 
  Kohmei Halada:
  Activities of Circular Economy in Japan - Towards Global Multi-Value Circulation -. 867-872
• 
  Michikazu Kojima:
  The Impact of Recyclable Waste Trade Restrictions on Producer Recycling Activities. 873-881
• 
  Kazuho Fujimoto, Shinichi Fukushige, Hideki Kobayashi:
  Data Assimilation Mechanism for Lifecycle Simulation Focusing on Process Behaviors. 882-889
• 
  Yasunori Kikuchi, Aya Heiho, Yi Dou, Izuru Suwa, I-Ching Chen, Yasuhiro Fukushima, Chiharu Tokoro:
  Defining Requirements on Technology Systems Assessment from Life Cycle Perspectives: Cases on Recycling of Photovoltaic and Secondary Batteries. 890-908
• 
  Wu-Hsun Chung, Pei-Cheng Wu:
  Packaging Evaluation of Consumer Electronics Products from Economic, Logistical, and Environmental Perspectives. 909-918
• 
  Shuho Yamada, Shogo Miyajima, Tetsuo Yamada, Stefan Bracke, Masato Inoue:
  Decision Support Method for Upgrade Cycle Planning and Product Architecture Design of an Upgradable Product. 919-929
• 
  Kazuki Yoda, Hayate Irie, Yuki Kinoshita, Tetsuo Yamada, Shuho Yamada, Masato Inoue:
  Remanufacturing Option Selection with Disassembly for Recovery Rate and Profit. 930-942
• 
  Ryo Yonemoto, Haruhiko Suwa:
  Task Scheduling of Material-Handling Manipulator for Enhancing Energy Efficiency in Flow-Type FMS. 943-950
• 
  Tetsuo Samukawa, Kazuki Shimomoto, Haruhiko Suwa:
  Estimation of In-Process Power Consumption in Face Milling by Specific Energy Consumption Models. 951-958
• 
  Yuta Yaguchi, Kenji Takeuchi, Tadashi Waragai, Toshitake Tateno:
  Durability Evaluation of an Additive Manufactured Biodegradable Composite with Continuous Natural Fiber in Various Conditions Reproducing Usage Environment. 959-965
• 
  Chiharu Tokoro, Soowon Lim, Yukihiro Sawamura, Masataka Kondo, Kazuhiro Mochidzuki, Taketoshi Koita, Takao Namihira, Yasunori Kikuchi:
  Copper/Silver Recovery from Photovoltaic Panel Sheet by Electrical Dismantling Method. 966-974
• 
  Katsuya Tsuji, Kiyo Kurisu, Jun Nakatani, Yuichi Moriguchi:
  Evaluation of Environmental Impact of Car Sharing in Consideration of Uncertainty of Influential Variables. 975-983
• 
  Akihisa Ogawa, Andante Hadi Pandyaswargo, Daiki Yoshidome, Hiroshi Onoda:
  Environmental and Economic Evaluation of a Mechanical Biological Treatment System for a Small and Medium-Sized Waste Treatment Facility Considering the Karatsu Smart Disaster-Resilience Base Construction Project. 984-998
• 
  Akihiro Yoshimura, Kota Takatori, Yasunari Matsuno:
  Environmentally Sound Recovery of Gold from Waste Electrical and Electronic Equipment Using Organic Aqua Regia. 999-1004
• 
  Tomoaki Hiruta, Yasushi Umeda:
  Model-Based Deterioration Estimation with Cyber Physical System. 1005-1012
• 
  Satoko Nasu, Shota Tajima, Yasuo Sugai:
  Method of Priority Order for Simultaneous Solar-Derived Power Usage at a Solar-Powered House and Neighborhood. 1013-1024

Regular Papers

• 
  Ahmed Tawfik, Mohamed Radwan, Mazen Ahmed Attia, Paul Bills, Radu Racasan, Liam Blunt:
  The Detection of Unfused Powder in EBM and SLM Additive Manufactured Components. 1025-1035
• 
  Isamu Nishida, Hidenori Nakatsuji, Keiichi Shirase:
  Automated Tool Path Generation for Roughing Using Flat Drill. 1036-1044
• 
  Liu Chi Hsin, Tatsuya Sugihara, Toshiyuki Enomoto:
  High Speed Machining of Inconel 718 with High Pressure Coolant Focusing on Material Structures of CBN Tools. 1045-1050
• 
  Atsushi Sato, Wataru Natsu:
  Theoretical Verification of Film Forming in Local Electroplating Process with Electrolyte Suction Tool. 1051-1061