Carbon fiber reinforced polymer (CFRP) utilization meets the requirements of stiffness, damping, and light weight for enhanced performance of machine tools. Stamping presses are expected to function for billions of cycles, resulting in the fatigue of the employed materials and parts. High-speed stamping presses, such as the Bruderer BSTA-200, should fulfil the increasing customer requirement of enhancing both quality and quantity of the delivered parts. Among the quickest presses currently available in the market, these BSTA presses can reach speeds up to 2000 strokes per minute (spm) with a stroke of 8 mm and still continue operating for many decades. For this project, new requirements were defined: a 25% increase of the stamping speed reaching up to 2500 spm, while maintaining the same stroke of 8 mm. The ram was redesigned by making use of CFRP, and because of its high stiffness and strength, it enabled a weight reduction of 65%. Owing to the stamping force of 200 kN and the impact of the stamping process, the material of the ram is highly strained. A major concern in utilizing CFRP in machine tools is the fatigue and change in material properties with increasing stress cycles. Therefore, the fatigue behavior of CFRP had to be validated in the very high cycle fatigue (VHCF) range. This was performed using a newly developed fatigue test bench. To complete 10⁹ cycles within a few weeks, the testing occurred at the specimen’s resonance frequency with a constant and controlled strain of 0.1%. Aspects such as resonance frequency testing, heating of the specimen, and an accurate measuring system were considered. The specimens had to be designed and optimized for this type of testing, thus resulting in a cylindrical tube shape with a unidimensional (UD) arrangement of the fibers in longitudinal and transverse direction.

1. [1] H. C. Möhring, C. Brecher, E. Abele, J. Fleischer, and F. Bleicher, “Materials in machine tool structures,” CIRP Annals – Manufacturing Technology, Vol.64, pp. 725-748, 2015.
2. [2] L. Kroll, P. Blau, M. Wabner, U. Frieß, J. Eulitz, and M. Klärner, “Lightweight components for energy-efficient machine tools,” CIRP J. of Manufacturing Science and Technology, Vol.4, pp. 148-160, 2011.
3. [3] B. J. Kim, H. S. Kim, and D. G. Lee, “Design of hybrid steel/composite circular plate cutting tool structures,” Composite Structures, Vol.75, pp. 250-260, 2006.
4. [4] S. H. Chang, P. J. Kim, D. G. Lee, and J. K. Choi, “Steel-composite hybrid headstock for high-precision grinding machines,” Composite Structures, Vol.53, pp. 1-8, 2001.
5. [5] E. Relea, R. Kussmaul, L. Weiss, M. Zogg, P. Ermanni, and K. Wegener, “Application of carbon fiber reinforced polymer sandwich structures in multiaxial testing machines,” Proc. of 12th Int. Conf. on Sandwich Structures (ICCS-12), pp. 74-76, 2018.
6. [6] R. Meltke, “CFK-Querbalken einer TRUMPF-Laserschneidanlage,” 2010. http://www.publica.fraunhofer.de [Accessed July 7, 2019]
7. [7] https://www.kuka.com/en-ch/press/news/2005/04/new-kuka-kr-100-2-pa-palletizing-robot [Accessed July 22, 2019]
8. [8] N. Theodore, “High cycle fatigue: A mechanics of materials perspective,” Elsevier Science, p. 641, 2006.
9. [9] E. K. Gamstedt and R. Talreja, “Fatigue damage mechanisms in unidirectional carbon-fibre-reinforced plastics,” J. of Materials Science, Vol.34, pp. 2535-2546, 1999.
10. [10] J. Aboudi, “Mechanics of Composite Materials. Studies in Applied Mechanics,” Elsevier, 1991.
11. [11] G. Lepoittevin, “Composite Laminates with Integrated Vibration Damping Treatments,” Ph.D. thesis, ETH Zürich, 2012.
12. [12] A. Hosoi, Y. Arao, H. Karasawa, and H. Kawada, “High cycle fatigue characteristics of quasi isotropic CFRP laminates,” Advanced Composite Materials, Vol.16, No.2, pp. 151-166, 2012.
13. [13] R. D. Adams and D. G. C. Bacon, “Effect of Fibre Orientation and Laminate Geometry on the Dynamic Properties of CFRP,” J. of Composite Materials, Vol.7, No.4, pp. 402-428, 1973.
14. [14] R. Chandra, S. P. Singh, and K. Gupta, “Damping Studies in fiber-reinforced composites – a review,” Composite Structures, Vol.46, Issue 1, pp. 41-51, 1999.
15. [15] B. Harris, “Fatigue in composites. Science and technology of the fatigue response of fibre-reinforced plastics (1st edition),” Woodhead Publishing Ltd., 2003.
16. [16] D. Chung, “Carbon Fiber Composites,” Butterworth-Heinemann, 1994.
17. [17] R. D. Adams and M. R. Maheri, “Dynamic Flexural Properties of Anisotropic Fibrous Compoiste Beams,” Composite Science and Technology, Vol.50, Issue 4, pp. 497-514, 1994.
18. [18] R. G. Ni and R. D. Adams, “The Damping and Dynamic Moduli of Symmetric Laminated Composite Beams – Theoretical and Experimental Results,” J. of Composite Materials, Vol.18, No.2, pp. 104-121, 1984.
19. [19] D. X. Lin, R. G. Ni, and R. D. Adams, “Prediction and Measurement of the Vibrational Damping Parameters of Carbon and Glass Fibre-Reinforced Plastics Plates,” J. of Composite Materials, Vol.18, Issue 2, pp. 132-152, 1984.
20. [20] A. D. Nashif, D. I. G. Jones, and J. P. Henderson, “Vibration damping,” John Wiley and Sons, 1985.
21. [21] ASTM D3039/D3039M, “Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials,” ASTM Int., 2014.
22. [22] R. Talreja and C. V. Singh, “Damage and Failure of Composite Materials,” Cambridge University Press, 2012.
23. [23] T. J. Adam, P. Horst, P. Lorsch, and M. Sinapius, “Experimental Investigation of VHCF of Polymer Composites: Two Alternative Approaches,” Materialprufung, Vol.54, pp. 764-741, 2012.
24. [24] I. A. Al-Hmouz, “The Effect of Loading Frequency and Loading Level on the Fatgiue Behavior of Angle-Ply Carbon/PEEK Thermoplastic Composites,” Masters Thesis, Concordia University Montreal, 1997.
25. [25] ISO 13003:2003, “Fiber-reinforced plastics – Determination of fatigue properties undercyclic loading conditions,” 2003.
26. [26] M. H. R. Jen and C. H. Lee, “Strength and life in thermoplastic composite laminates under static and fatigue loads. Part I: Experimental,” Int. J. of Fatigue, Vol.20, No.9, pp. 605-615, 1998.
27. [27] https://www.krempel-group.com [Accessed July 2, 2019]