How to Make a Model Pyramid

Download Article

Build a DIY pyramid with paper, cardboard, or sugar cubes

Co-authored by Eric McClure

Last Updated: June 24, 2024 References

Download Article

Paper

|

Cardboard

|

Sugar Cubes

|

Video

|

Q&A

|

Things You'll Need

Building a model pyramid is quite easy if you have the right materials and know how to carefully measure, cut, and glue. You can make a simple pyramid out of cardboard or paper. To do this, carefully measure and cut each face of your pyramid and attach them together with glue or tape. For a different style of pyramid, you can make a step pyramid out of sugar cubes and glue. Regardless of the material that you choose to use, building a model pyramid can be an easy way to complete a school project while having fun building something from scratch.

Things You Should Know

Draw a 7.7 by 7.7 cm (3x3 in) square on a sheet of paper. Then, draw a 6.2 cm (2.4 in) line extending from the middle of each side.
Then, draw lines connecting from the top of each line to each corner of the square. Cut along the lines to cut out the shape.
Fold the triangles up so the tips meet in the center. Use tape to secure the pyramid together.

Method 1

Method 1 of 3:

Making a Paper Pyramid

Download Article

1
Measure and draw out a square using a pencil and ruler. Use a pencil and a ruler to draw out a square on a sheet of clean paper. Hold the ruler in your nondominant hand and use the side of the ruler as a straight edge to draw each side of your square.^{[1]
X
Research source}
- Make your square 7.7 by 7.7 centimetres (3.0 by 3.0 in) to create a scale model of the Great Pyramid! Every 1 centimetre (0.39 in) will represent 30 metres (98 ft) of the pyramid.
2
Draw 4 symmetrical lines that start on each side of your square. Use your ruler to calculate the midsection of each side of your square. Mark the spot where you need to place each line with a small hash mark and then rotate your ruler to draw each line perpendicular to the square's side.^{[2]
X
Research source}
- For the Great Pyramid scale model, place each line 3.85 centimetres (1.52 in) in from the corner of each side, and make it extend 6.2 centimetres (2.4 in) out from the square.
- If you're not building the scale model of the Great Pyramid, you have to draw each line so that it's big enough to meet the other faces of the pyramid in the center. To be safe, make each line at least the same length as a single side of your square.
Advertisement
3
Connect each line to the adjacent corners with your pencil. Use your ruler to line up a connection between the top of each line and the corner on each adjacent side. Start at the top of a line and draw a connecting line to the corner of the square on the left. Draw a symmetrical line going from the top of the line to the corner on the right. Sketch your lines out using the ruler and pencil until you've drawn 8 connecting lines to their corresponding corner on the square.^{[3]
X
Research source}
- You should now be looking at 4 triangles that share a base with the 4 sides of your square.
- For the scale model, each connecting line should be 7.3 centimetres (2.9 in).
Hold the paper in your nondominant hand and use a pair of scissors to cut along the exterior edges of your shape. Continue cutting along the edges until you've cut out the entire drawing. It should look like it was cut out in one continuous cut.^{[4]
X
Research source}

Tip: To make cutting around the sharp angles easier, rotate the paper in your hand instead of trying to turn the scissors.
5
Fold each face of the pyramid towards the middle. Lay your cut-out shape flat on your work surface. Use your nondominant hand to brace the paper along each side of your square before folding each triangle towards the center. Use the pad of your finger to firmly press down along each fold. Continue until you've folded every side of your pyramid towards the center.^{[5]
X
Research source}
- You can fold each face so that it lays flat in the center before folding the next section if you want to get each side out of the way. This may make folding much easier.
6
Tape the edges of the pyramid's faces where they meet. Pull each folded edge out until each triangle is sitting flush against one another. Use clear tape to permanently join each edge together. Use long pieces of tape, and put each strip on the side of your triangles at the line where they meet one another before pressing lightly along the sides.^{[6]
X
Research source}
- Press your tape down slowly and delicately. There's nothing but air inside your pyramid, and you don't want to crush it while you're taping it.
7
Cover your pyramid with glue to add sand if you want to make it realistic. Place your pyramid in a small, plastic sandwich container or paper plate to catch the sand that you're going to pour over the pyramid. Use a paintbrush to apply white glue to each face of your pyramid. Spread it liberally across each visible surface until the entire structure is wet.^{[7]
X
Research source}
- While you certainly want to cover each side of your pyramid, avoid using heavy globs of glue. You don't want to weigh your pyramid down and ruin the paper.
Slowly pour sand over the top of your pyramid, covering each side of the structure as you pour. Use a spoon to scoop sand that falls to the bottom of your container on top of the areas that are missing sand. Repeat this process until each section is fully covered. Wait 45-60 minutes for your pyramid to fully dry before handling it.^{[8]
X
Research source}

Method 2

Method 2 of 3:

Building a Cardboard Pyramid

Download Article

1
Draw out 4 triangles of equal size on a piece of cardboard. Each triangle has to be exactly the same size to make a perfect pyramid. Measure your base first and then draw a line extending from the center. Use a ruler as a straight edge to draw connecting lines between the top of your center line and each end of the triangle's base.^{[9]
X
Research source}
- To make a medium-sized pyramid, make each triangle 8 inches (20 cm) wide and 12 inches (30 cm) tall from the center.
2
Cut your triangles out with scissors or a utility knife. Place your cardboard on a stable work surface and hold it in your nondominant hand. Use your dominant hand to cut along each side of each triangle. Continue cutting until you have 4 triangles of equal sizes.^{[10]
X
Research source}
- If your cardboard is too thick to be cut with scissors, put a cutting board down and lay each piece of cardboard flat. Use a utility knife to cut each triangle out by dragging it through the cardboard along each section of your outline.
3
Glue 2 triangles together at the edge with a glue gun. Plug in a glue gun and set it down nearby to let the glue heat up. Use both hands to hold 2 triangles with their bases flat on the work surface and lean them together so that 2 of their edges meet. Use your nondominant hand to hold them together near the top as you grab your glue gun. Pull the trigger on the glue gun as you slide it along the edge where your 2 faces meet.^{[11]
X
Research source}
- Hold your 2 sides still for 45-60 seconds to give your glue time to initially dry. Set your 2 pieces aside and leave them for 10-20 minutes to let the glue fully set.
4
Attach your other 2 sides together and combine your pieces. Glue the other 2 sides together the same way and let them air dry. Once you have 2 pieces, arrange them in the center of your work surface so that each remaining edge is connecting. You should be looking at an unglued pyramid at this point. Use your glue gun to run hot glue along the 2 remaining edges and let it dry for 10-20 minutes.^{[12]
X
Research source}
- After you put glue along the 2 remaining edges, lightly press your pieces together for 30-45 seconds to keep any gaps closed as it dries.
5
Draw and cut out a square base for your pyramid. You can draw your base out so that it fits perfectly around your pyramid by holding your glued triangles in place and using the base of each face as a straight edge. You can also choose to make a bigger base by measuring 4 lines of qual distance out from each side of the pyramid. Use a straight edge and a pencil to sketch your base and cut it out with scissors or a utility knife.^{[13]
X
Research source}
- For a medium-sized pyramid, a good base is 14 by 14 inches (36 by 36 cm).
To make your pyramid look like it's made out of individual bricks, draw a series of parallel lines horizontally along each face of your pyramid with a black marker. The lines don't need to be perfectly straight if you want it to look natural, but you can choose to make them even with a straight edge if you'd like. Make vertical marks between each horizontal row every 1–2 inches (2.5–5.1 cm) to create the appearance of individual bricks.^{[14]
X
Research source}

Tip: The bricks are only going to partially show through after you cover the pyramid in glue and sand, so don't worry if you make a mistake.
7
Use a butter knife or popsicle stick to spread glue over each face. Drizzle white glue over your pyramid and use the flat side of a popsicle stick or butter knife to spread it around. Continue spreading the glue until you've covered most of the pyramid.^{[15]
X
Research source}
- Don't forget about the base! Spread a lot of glue around your base so that the sand can fully cover it.
8
Sprinkle sand over your pyramid to make it look real. While the glue is still wet, pour sand all over your pyramid. Slowly pour your sand 4–6 inches (10–15 cm) above each section of your pyramid and let it collect at the base to give your pyramid a realistic look. Let it air dry for 1-2 hours before touching it.^{[16]
X
Research source}
- If you want more of the bricks that you drew to show through, you can scrape sections of your pyramid with your knife or popsicle stick to knock some of it off.

Method 3

Method 3 of 3:

Creating a Step Pyramid with Sugar Cubes

Download Article

1
Spread glue across the surface of a paper plate. Pour white glue on top of your plate. Use a paintbrush to spread it evenly over the surface where you want to build your pyramid. This will serve as the base, so make sure that each section has some glue on it.^{[17]
X
Research source}
- You can use a Styrofoam tray or wood surface as a base if you prefer.
- You'll need 140 cubes for a 7x7 pyramid.
Start with a corner of your pyramid. Place your first sugar cube in the glue and press down lightly to set it in place. Continue placing cubes next to it in both directions until you have 7 cubes on each side. Fill in the rest of the open space in your square with sugar cubes.^{[18]
X
Research source}

Tip: Don't press down too hard on your initial layer or you'll risk breaking a cube. You don't need much pressure to get the cube to stick to the glue, since sugar cubes are porous.
Use the gaps between cubes to determine where a 6x6 layer will rest on top of the first layer. Pour glue in a square along the edges of your 6x6 outline and then fill in the middle of the square with glue. Put at least one dollop of glue on each interior square to ensure that the upper layer remains in place.^{[19]
X
Research source}
4
Add your 6x6 layer of sugar cubes by putting them on top of the glue. With your glue still wet, begin to place cubes in a 6x6 row on top of your first layer. Line each cube up so that it rests directly on top of a cube underneath it. Do not press down on your cubes as you place them.^{[20]
X
Research source}
- Save time by setting your layer out on a separate plate and transferring it over by pinching an entire row between two fingers.
5
Continue this process until you've completed a pyramid. Place additional layers on top of your pyramid by moving in 1 cube at a time for each layer. Your next layer will be 5x5, then 4x4, and so on. Add a new layer of glue each time that you add a layer.^{[21]
X
Research source}
- Do not leave cubes out of the middle of a layer or you'll risk breaking your pyramid.
- You can use glue and glitter, sand, or paint to cover your cube if you'd like.

Community Q&A

Search

Add New Question

Question

Can I do this with sugar cubes?

Community Answer

Yes. You'd need at least 100 sugar cubes, though. You'd also need cardboard, rubber cement and sand, but you can do it.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 17 Helpful 16
Question

How can I make hollow sugar cube pyramids?

Community Answer

Just stack them in the pyramid shape that you desire. If you want it to be edible, you can use icing as glue, if not, you can use regular glue.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 21 Helpful 21

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Reader Videos

Submit a Video Tip!

Share a quick video tip and help bring articles to life with your friendly advice. Your insights could make a real difference and help millions of people!

Submit a Video