How to Cut Carpet

Co-authored by Sarah Fogle

Last Updated: December 13, 2024 Fact Checked

Cutting carpet may seem like a straightforward task, but there's an art to getting the job done right. Whether you’re putting it in or pulling it up, knowing the finer points of cutting carpet can save you valuable time and expense. The main thing to remember is to use a knife that’s sharp enough to allow you to work quickly and with the necessary accuracy and control. Beyond that, it’s simply a matter of taking your time to avoid mishaps and see that the carpet blends seamlessly with the layout of the room.

Method 1

Method 1 of 3:

Making Clean Cuts

Download Article

1
Start with a sharp knife. This will be the most important (and possibly the only) tool you’ll need to cut carpet.^{[1]
X
Expert Source

Sarah Fogle
DIY Specialist

Expert Interview. 27 July 2021.} A standard utility knife is preferable, though something like an X-Acto knife or razor can also do the trick. Whatever you use, make sure the edge is nice and sharp.^{[2]
X
Research source}
- If you’re using a utility knife with a removable blade, take a minute to insert a new one before you get started.
- You might also use a handheld electric carpet cutting tool. These tools feature durable edges and automated cutting action, which can help you sidestep the difficulty of doing it manually.^{[3]
  X
  Expert Source
  
  Sarah Fogle
  DIY Specialist
  
  Expert Interview. 27 July 2021.}
2
Place the tip of the knife against the carpet. Grip the knife in your dominant hand so that the angled edge of the blade is pointing away from you. Point the blade downward and touch the tip to your starting point on the carpet. Then, press down just enough to pierce the carpet’s tough backing.
- Cutting carpet is mostly a matter of getting through the backing, which is the hard, flat side that lays flush against the floor.
- Don’t jam the blade into the carpet too deeply. You might blunt or break your knife, or even mark up the underlying flooring.
Advertisement
3
Drag the blade along in a straight line. Once you’ve got the tip through the carpet, pull back on the knife using a slow, smooth motion. You should be able to feel the backing give way beneath the blade. Use a straightedge to guide your movements, and pause every two or three feet to reposition before you continue cutting.^{[4]
X
Research source}
- Keep your wrist fixed to avoid making sloppy or uneven cuts.
- If you don’t have the benefit of a straightedge, try feeling for one of the seams in the underside of the backing. Following a seam will help you make straight, steady cuts.
4
Replace your knife blade as needed. Your original blade will quickly lose its edge after slicing through multiple feet of tough backing material. To keep the project moving along, be sure to have a new blade on standby. Working with a dull blade will only slow you down.^{[5]
X
Research source}
- It may seem like a hassle to have to keep stopping to change blades, but it will save you considerable time and labor in the long run.

Method 2

Method 2 of 3:

Cutting Carpet for Installation

Download Article

1
Measure your work area. Use a tape measure to find the length and width of the room you’re carpeting. This will give you an idea of exactly how much carpet you’ll need. It will also make it easier to cut each section to the proper specifications.^{[6]
X
Research source}
- Most rolls of carpet come in widths of 12 feet, so be sure to take this into account when plotting out the best way to cover the floor.^{[7]
  X
  Research source}
- To find the inner area of the room, multiply the length of the room (in feet) by the width.
2
Work a few feet at a time. The key to installing professional-looking carpet is to take your time and give each section the same amount of care and attention. Unroll the carpet as you go, separating it into more manageable strips. Cut two or three feet, then scoot back and resume cutting from a comfortable position.
- The roll itself can serve as a convenient reference for tracing straight lines.
3
Make your cuts on the backside of the carpet. Whenever space allows, fold the carpet roll over and run your knife directly over the backing to achieve a cleaner cut with less struggle or guesswork. The backing is hard and flat, which means you won’t have to fight your way through the thick piling.^{[8]
X
Research source}
- Mark the backing with a pencil or permanent marker to indicate where you need to cut, or simply use the intersecting seams as a handy visual reference.
- Folding the carpet will also create a more secure cutting surface, preventing you from scarring the flooring underneath.
4
Cut carefully around corners, contours and openings. For some layouts, it may be necessary to leave space for a fireplace, a section of tile or some other piece of detailing. Measure these areas first so you’ll know how much carpet you need to trim. If you’re worried about making a mistake, you can lightly score the carpet on the first pass before committing to the cut.^{[9]
X
Research source}
- It may be helpful to perform a mockup of the cuts you intend to make on a scrap piece of cardboard first.^{[10]
  X
  Research source}
- Complex cutouts may be best left to the professionals.

Method 3

Method 3 of 3:

Removing Old Carpet

Download Article

1
Use the tip of the knife to open up a hole in the carpet. Begin with a section a few feet away from the wall. Make a slit approximately 4-5 inches long—it should be big enough to easily slip your hand into.
- Cutting the carpet every few feet will be useful for large or oddly-shaped rooms where you’re unable to remove it in one piece.
2
Pull up on the loose carpet with your free hand. Reach into the slit you just cut and lift the carpet away from the floor. You can now finish cutting without your knife ever coming into contact with the flooring.
- If your carpet is tacked down with staples or adhesive, it may take a little effort to get it started by hand. Use a putty knife to chip away at one edge until there’s enough to grab hold of.
3
Continue cutting the carpet as you pull it up. The combined action of lifting and slashing should allow you to cut away large strips in very little time. After every few feet, move back and take a new grip on the loose edge. When you’ve cut all the way across a given section, peel it back, roll it up and set it aside somewhere out of the way.
- Since you’ll be throwing the old carpet out, there’s no need for precision or delicacy here.
- Don’t get into too big of a hurry—that’s how accidents happen.
4
Pry up the outer edge of the carpet. Pull the carpet free from walls and corners later using a claw hammer, pry bar or pair of pliers. That way, it won't snag on anything or provide resistance when it comes time to carry it away. Once you've gotten the edges started, go around the perimeter of the room and loosen the rest of the carpet by hand.^{[11]
X
Research source}
- If you're having trouble, use your utility knife to separate the carpet where it connects to the baseboards.
- Once the carpet has been cut and unfastened, you can simply roll it up, carry it out and dispose of it.
5
Dispose of any remaining materials. Before you call it a day, inspect the flooring beneath the carpet closely. Dig out any staples or dried clumps of adhesive you see with a floor scraper, then vacuum to clear the area of debris. After you’ve cleaned up, you can go on to install new carpet, hardwood, tile or laminate.^{[12]
X
Research source}
- Unless you’re planning on repurposing your old carpet, it can simply be thrown away once the project is complete. Dig out any remaining staples or dried clumps of adhesive with a floor scraper.
- A shop vac is the best way to collect dust, stray threads and other materials that are left lying around after removal.

Expert Q&A

Search

Add New Question

Question

Can I use a utility knife to cut carpet?

Sarah Fogle
DIY Specialist
Sarah Fogle is a DIY Home Improvement Specialist and the creator of Ugly Duckling House. With over a decade of experience, Sarah specializes in beginner-friendly home remodeling projects. Sarah holds an MBA from Georgia State University. She has been featured in multiple publications including Better Homes and Gardens and Make Magazine. She has also partnered with brands such as Lowe's, Home Depot, and Martha Stewart Crafts.

Sarah Fogle

DIY Specialist

Expert Answer

Definitely! While there are specialty tools designed for cutting carpet, a standard utility knife is also very efficient.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 4
Question

Can you cut carpet with a power tool?

Sarah Fogle
DIY Specialist
Sarah Fogle is a DIY Home Improvement Specialist and the creator of Ugly Duckling House. With over a decade of experience, Sarah specializes in beginner-friendly home remodeling projects. Sarah holds an MBA from Georgia State University. She has been featured in multiple publications including Better Homes and Gardens and Make Magazine. She has also partnered with brands such as Lowe's, Home Depot, and Martha Stewart Crafts.

Sarah Fogle

DIY Specialist

Expert Answer

Go for it! People often use multi-purpose tools with a cutting blade to cut through their carpet.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 5
Question

I want to cut a runner, but what do I do to protect the cut edge?

Community Answer

Get the edge bound by overlocking it. There are carpet overlockers listed in the phone directory, or try a Google search.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 3

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

By working with another person, you’ll be able to lay or pull up carpet twice as fast.

Thanks
Helpful 1 Not Helpful 0
Measure your workspace twice to make sure you have the dimensions right.

Thanks
Helpful 0 Not Helpful 0
For extensive jobs, wear gloves, goggles and knee pads to keep yourself comfortable and protected. You might also choose to pull on a facemask, if you’re sensitive to dust.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Be extremely cautious when handling your utility knife. The blade will be dangerously sharp, and even the slightest slip might result in serious injury.

Thanks
Helpful 2 Not Helpful 1
Doorway seams and other transitions can be difficult to cut and place correctly. Save this part for an experienced contractor.

Thanks
Helpful 0 Not Helpful 5