Let's go over what Time-of-Flight is and what the differences between iToF and dToF are.
10BASE-T1L Two-Wire Ethernet comes to MicroMod in the form of a new Function Board and Kit. Make sure to check out our new Third Hand offerings, too!
The new Alorium Sno M2 Processor joins the MicroMod family along with a multitude of new kits!
We are testing out how much soldering really changes air quality using the MicroMod Ethernet Function board and the MicroMod Environmental Function board!
Our new MicroMod Ethernet Function Board is now available! Also, new products from SparkX, and more!
We've teamed up with MikroElektronika to release two new mikroBUS capable boards as well as hundreds of Click boards!
The Artemis Global Tracker is now fully supported + MicroMod gets a full blown GNSS board!
Follow this tutorial to build a Rotating Puzzle room for your Dungeon. This project incorporates parts from the OpenForge2.0 project with a few additional 3D-printed components and SparkFun's Qwiic and MicroMod systems to make a rotating puzzle room that can be activated by placing a magnet on the "secret" tile or remotely using a computer, phone, or tablet.
All good things must come to an end. We’re calling it a wrap on holiday sales with one last Flash Sale - 25% off select MicroMod boards. Available through Weds, Dec 8 @ 10 a.m. MST.
The AWS IoT ExpressLink is available with new Raspberry Pi kits from Kitronik, and a new imaging sensor from Luxonis.
A new kit utilizing AWS's ExpressLink and SparkFun's MicroMod system is now available for pre-order.
How I used Qwiic breakouts, the MicroMod system, and Tinkercad to make a joystick-controlled toy crane.
Sandeep Mistry, from Arm, recently released this blog that teaches readers how to train and deploy a custom audio classifier machine learning model to a Raspberry Pi Pico or the SparkFun MicroMod RP2040, using TensorFlow and Google Colab
A new Air Velocity Sensor breakout has Rob climbing through the vents, the RTK Express has a new kit, and SparkX brings MicroMod to the Feather format.
Visit our rapid prototyping hub for everything you need to get your idea off the ground.
How I made a simple linear motion system using MicroMod, Qwiic breakouts, and 3D printed parts.
Use the MicroMod Input and Display Carrier Board, paired with a ESP32 Processor Board, to stay on top of your meetings and email.
Tags
Recent Blog Comments
only one way to become an expert ... just do it
Apologies for my confusion. I was deep in the datasheet (page 1137) where this line gave the impression of USB 2.0 capabilities. "RP2350…
Yep you are correct. I mistakenly took the spec from the Pico 2 board itself which states "Raspberry Pi Pico 2 comes with all the features…
More corrections: According to the datasheet RP2350 has no internal flash not 4MB as stated here. The RP2354 has 2MB of internal flash.
The RP2350 is still USB 1.1, not 2.0 as stated in the article. I am sure I wouldn't have spent a few hours reading about ULPI trying to see…
Thanks for the heads up! It looks like we went live with the 1st draft 🤦 I've got it updated now and will double check the specs again.
In addition to the parts you highlighted, the M33 core not the same as the M0+, as it's described as being in the article
Something does not add up here. According to the RP2350 datasheet on RPi site, RP2350 has: > * Dual Cortex-M33 or Hazard3 processors at…
[url]https://miwebenterrassa.com/paso-a-paso-para-iniciar-tu-proyecto-con-el-esp32-thing-plus/[/url]
Hi, "For a full wishlist of products for this project, check it out here:" ....but I see no link to anything further. I am hoping you have…