加工定制是 | 类型直流风扇 |
品牌禹臣 | 型号FD1260-S1112D |
电机功率0(w) w | 电压12(V) V |
电流0.13(A) A | 适用范围12 |
风量30CFM | 风叶直径60MM |
转速6000(r/min) r/min |
加工定制是 | 类型直流风扇 |
品牌禹臣 | 型号FD1260-S1112D |
电机功率0(w) w | 电压12(V) V |
电流0.13(A) A | 适用范围12 |
风量30CFM | 风叶直径60MM |
转速6000(r/min) r/min |
Model | Bearing Type(类型) | Rated Current(额定电流) | Rated Current(Max.)(额定电流〈〉) | IC | Air Flow | Air Flow(风压) | Pressure(风量) | Pressure | NOISE(噪音值) | |||||||||||||||
變更 | 1S | 1B1S | 2B | 5V | 12V | 24V | 48V | 5V | 12V | 24V | 48V | (RPM) | (m3/min) | (CFM) | (mm-H2O) | (inch-H2O) | 1S | 1B1S | 2B | C | ||||
(520)Center (830)Center (正)葉)Center (反)葉)Center (18?)Center (24?)Center (24?) Center Center
| H | 0.18 | NA | |||||||||||||||||||||
M | 0.16 | |||||||||||||||||||||||
L | 0.14 |
现产品主要广泛应用于计算机、通信、电源、变频器、仪器仪表、工业设备、电器等。DC风扇型号齐全,外形尺寸有25*25*06、30*30*10、35*35*15、40*40*(10/20/28、)50*50*(10/15)、60*60*(10/15/20/25/38)、70*70*(15/25)、80*80*(15/20/25)、92*92*(25/38)、120*120*(25/38)等,电压可提供5V、12V、24V、48V等。
交流风扇规格为:8025,8038,9025,11025,12025,12038,15038,17251,20060.电压可提供110V,220V,380V。
This specification to model NO:(产品机型)DFH1225S
2.STANDARD ENVIRONMENTAL CONDITIONS(通用环境)
Temperature 25℃and relative humidity 60%shall be standard if no doubt
Arises in the judgement,however,it is permitted that rests are conducted in
The environment of temperature 5-35℃,relative humidity 45-85%(推荐温度25℃,相对湿度
60%下使用,但在温度5-35℃相对湿度45-85%的条件下,产品能正常工作)
3.STRUCTURE AND FORM(产品结构)
3-1 | Structure(结构) | axial motor fan(轴流风机) |
3-2 | Housing(框架) | BLACK PBT |
3-3 | Blade(扇叶) | BLACK PBT |
3-4 | Bearing(轴承结构) | SLEEVE Bearing |
3-5 | Lead (线材) | 两线无端/UL1007/24AWG红/黑L=300MM |
4.RATED AND OPERATING CONDITLONS(额定条件)
4-1 | Rated voltage(额定电压)(VDC) | 24.0 |
4-2 | Rated current(额定电流)(A) | 0.23A±10%(实测0.15) |
4-3 | Startup voltage(启动电压)(VDC) | 12.0 |
4-4 | Rated input power(输入功率)(W) | 3.6 |
4-5 | Operating voltage(电压范围)(VDC) | 21.6-26.4 |
4-6 | Operating temperarure(工作温度)(℃) | -10℃--+70℃ |
4-7 | Storage temperature(收藏温度)(℃) | -40℃--+80℃ |
4-8 | Speed(转速)(RPM) | 2500±10% |
5.AIR FLOW-AIR PRESSURE CHARACTERISTIC(风量-风压特性)
Applicable conditions:Shall be applied in the state when the standard, environmental conditions and voltage are fixed.(注意事项:不变化环境及工作电压)
ITEM (测试项目) | CONDITIONS (测试条件) | STANDARD (测试标准) | |
5-1 | Max.air flow | Air pressure=0 | 92.06CFM |
5-2 | Max.air pressure | Air flow=0 | 4.38mmH2O |
5-3 | Air flow.air Pressure characteristics |
| AS performance Curves |
6.PERFORMANCE(性能指标)
Applicable conditions:shall be applied under the standard environmental conditions and rated conditions
(测试条件:标准环境条件及额定条件下)
Item(测试项目) | Conditions(测试条件) | Standard(测试标准) | |
6-1 | Noise 噪音 | Shall be measure in around ***lated room of Background noise 20DB or Less,in a distance of lm from intake direction |
41.62dBa
|
6-2 | Insulation Resistance 绝缘阻抗 | When test voltage of DC 250v is impressed between terrninal(+)and horsing |
Min 10 megohm |
6-3 | Dielectrice Withstand Voltage 绝缘强度 | When voltage of AC 500v is Impressed between terminal(+)and housing | Shall be free of Abnormality |
7.SPECIAL TEST(专用试验)
7-1 | Vibration Resistance振动试验 | 5-3hz,0.04mm peak to peak amplitude,30-500hz,2g peak amplitude,for minutes to all three axis | It shall be satisfy the Specified perfornance standards |
7-2 | Shock Resistance 冲击试验 | 60g11 millisecond(1/2sine), two time to all threeaxis | It shall be satisfy the Specified performance Standards |
7-3 |
Durability 寿命试验 | Expected life endurance time until the revolution drops by 30%from the initial value When continuously run under standard environmental conditions and rated conditions |
30000 hours up(at 25℃/ relative humidity 45-85%)
|
7-4 | Rotor Resistance 堵转试验 | The rotor drive shall be Restricted for 72hours in the state where condition is made in the range of operating temperature and operating voltage range | It shall be have no damage |
8.OTHERS(其它)
8-1 | Rotaing direction | Marked on housing outside surface |
8-2 | Air flowing direction | Marked on housing outside surface |
8-3 | Appearance | Shall be free of flaw and contamination Which cause excessive drop in the commercial value |
8-4 | Mounting hole | 4 places |
8-5 | Lot marking | Date code label shall be applied on the outside surface |
企业类型 | 有限责任公司 | 统一社会信用代码 | 914403006939554669 |
---|---|---|---|
成立日期 | 2009-09-15 | 法定代表人/负责人 | 李黎 |
注册资本 | 50万(元) | 注册地址 | 深圳市南山区常兴路126号常兴广场东座住宅17N |
营业期限 | 2009-09-15 至 无固定期限 | 登记机关 | 南山局 |
经营范围 | 一般经营项目是:电子产品、通讯产品的技术开发与购销,家用电器的购销(法律法规、国务院决定规定登记前须审批的项目除外);经营进出口业务(法律、行政法规、国务院决定禁止的项目除外,限制的项目须取得许可后方可经营)。,许可经营项目是:农产品及预包装食品购销。 |